{"data":{"id":"783527","string_id":"3ZDNylWv","status":"1","parent_id":"103219","slug":"3ZDNylWv","order":"4","name":"MT1","type":"1","cover":"","cover_alt":"","desc":null,"website":"","contact":"","seo_title":"","seo_keyword":"","seo_desc":"","author":"Zoe LEE","published_time":"0","add_time":"1778058329","update_time":"1778058931","corp_auth_id":"0","verify_code_auth_id":"0","editor_type":"1","tags":[],"parent_name":"Product Guide","parent_type":"1","parent_slug":"rLWDgM","child":[{"id":"742059","string_id":"OhftS1O1","status":"1","parent_id":"783527","slug":"PUDU-MT1-Operation-Guide","order":"4","name":"MT1 Operation Guide","type":"2","cover":"","cover_alt":"","desc":null,"website":"","contact":"","seo_title":"","seo_keyword":"","seo_desc":"","share_switch":"0","share_code":"","author":"\u9648\u5353","published_time":"1778040329","add_time":"1773334096","update_time":"1778058362","corp_auth_id":"0","verify_code_auth_id":"0","editor_type":"3","file_type":"","auth_id":"[\"-1\"]","content":{"content_id":"742059","content":"

Without the express written consent of Shenzhen Pudu Technology Co., Ltd., no unit or individual may imitate, copy, transcribe or translate part or all of the contents of this operation guide without authorization, and shall not distribute it in any way (electronic, photocopying, recording, etc.) for profit. The product specifications and information mentioned in this operation guide are for reference only, and are subject to change without further notice. Unless otherwise specified, this operation guide is only used as a guide, and all statements made do not constitute any form of warranty.<\/p>\n

Purpose<\/h1>\n
This manual introduces how to use and maintain the PUDU MT1. It is intended for users, sales personnel, technical support engineers, and installation and commissioning engineers.<\/p>\n
Revision History<\/h1>\n\n\n\n\n\n\n\n
Date<\/td>\n Revision History<\/td>\n<\/tr>\n
2026.02.27<\/td>\n Initial release<\/td>\n<\/tr>\n
<\/td>\n <\/td>\n<\/tr>\n
<\/td>\n <\/td>\n<\/tr>\n
<\/td>\n <\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
Symbol Convetions<\/h1>\n
The following symbols may appear in this manual, and their meanings are as follows.<\/p>\n
\n\n\n\n\n\n\n
\n
Symbol<\/p>\n<\/td>\n
Description<\/td>\n<\/tr>\n
\n
$\"descript\"$ Danger<\/p>\n<\/td>\n
Indicates a high potential hazard that, if not avoided, will result in death or serious injury.<\/td>\n<\/tr>\n
\n
$\"descript\"$ Warning<\/p>\n<\/td>\n
Indicates a moderate or low potential hazard that, if not avoided, could result in minor injury to personnel, damage to the robot, etc.<\/td>\n<\/tr>\n
\n
$\"descript\"$ Caution<\/p>\n<\/td>\n
Indicates a potential risk that, if these texts are ignored, could result in damage to the robot, data loss, or unpredictable results.<\/td>\n<\/tr>\n
\n
$\"descript\"$ Notes<\/p>\n<\/td>\n
Indicates additional information to the main text, emphasizing and supplementing the main text.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
Contents<\/h1>\n
Purpose 1<\/a><\/p>\n
Revision History 1<\/a><\/p>\n
Symbol Convetions 2<\/a><\/p>\n
1\u3001Intended Use 3<\/a><\/p>\n
2\u3001Safety Instructions 4<\/a><\/p>\n
2.1 Usage Precautions 4<\/a><\/p>\n
2.2 Environmental Precautions 5<\/a><\/p>\n
2.3 Power Supply Precautions 6<\/a><\/p>\n
3\u3001Product Components 6<\/a><\/p>\n
3.1 Packing List 6<\/a><\/p>\n
3.2 Appearance and Parts 6<\/a><\/p>\n
3.3 Performance Parameters 8<\/a><\/p>\n
4\u3001Product Usage 9<\/a><\/p>\n
4.1 Power On, Power Off, Pause, Start 9<\/a><\/p>\n
4.1.1 Power On, Power Off 9<\/a><\/p>\n
4.1.2 Pause 10<\/a><\/p>\n
4.1.3 Start 10<\/a><\/p>\n
4.2 Handle Usage 11<\/a><\/p>\n
4.3 Work Modes 12<\/a><\/p>\n
4.3.1 Manual Cleaning 12<\/a><\/p>\n
4.3.2 Automatic Cleaning 13<\/a><\/p>\n
4.3.3 Scheduled Task Settings 13<\/a><\/p>\n
4.4 Cleaning Modes 14<\/a><\/p>\n
4.6 Robot Charging 15<\/a><\/p>\n
4.7 Viewing Device Status 16<\/a><\/p>\n
4.8 Settings 17<\/a><\/p>\n
4.9 Common Functions 17<\/a><\/p>\n
5\u3001Product Maintenance & Troubleshooting 22<\/a><\/p>\n
5.1 Daily Cleaning 22<\/a><\/p>\n
5.1.1 Cleaning Sensors and the Underside of the Robot 22<\/a><\/p>\n
5.1.2 Cleaning the Dustbox and Air Filter 22<\/a><\/p>\n
5.1.3 Cleaning the Side Brush and Brush 23<\/a><\/p>\n
5.2 Consumable Replacement 24<\/a><\/p>\n
5.3 Troubleshooting 24<\/a><\/p>\n
After-Sales Policy 25<\/a><\/p>\n
1\u3001Intended Use<\/h1>\n
$\"descript\"$ <\/p>\n
The PUDU MT1 robot is a professional sweeping robot targeted at large scenarios, supporting autonomous charging. The core advantage of the product lies in its ability to meet the cleaning needs of various hard floors. Its main target scenarios are indoor environments with large debris, such as warehousing and logistics, factories, home furnishing and building materials malls, airports, and stations. While reducing costs and increasing efficiency for customers, it improves the cleaning quality of the overall environment.<\/p>\n
2\u3001Safety Instructions<\/h1>\n
2.1 Usage Precautions<\/h2>\n
\n
\n
This product is a wheeled automatic cleaning robot, limited to use in flat indoor environments. Do not use it outdoors (such as open balconies), on rugged grounds (such as stairs), or in environments above 40\u2103 or below -10\u2103.<\/p>\n<\/li>\n
\n
Cannot be charged below zero degrees Celsius (the robot automatically protects and cannot be charged).<\/p>\n<\/li>\n
\n
Charging in dynamic temperature environments (e.g., medium-temperature cold storage, working inside, charging outside the cold storage) requires corresponding software versions. If the robot enters the wrong position accidentally due to obstruction or other factors, please pause the task in time and push it to the correct route before continuing the task.<\/p>\n<\/li>\n
\n
Do not drag the robot during operation. If you need to push or move the robot, please tap the screen to pause it first.<\/p>\n<\/li>\n
\n
Do not push the robot in reverse while it is powered on.<\/p>\n<\/li>\n
\n
Do not block the robot's sensors, otherwise it may cause abnormal movement or loss of positioning.<\/p>\n<\/li>\n
\n
Do not pat the device or forcefully press\/knock on the screen, otherwise it may cause damage to the device.<\/p>\n<\/li>\n
\n
Do not place loads on the robot, do not place open flame stoves, and do not place any combustible solids, gases, or liquids.<\/p>\n<\/li>\n
\n
Do not make temporary setting adjustments while the robot is moving. All operations should be carried out after tapping the screen to pause the robot's driving.<\/p>\n<\/li>\n
\n
Cleaning and maintenance work are prohibited while the machine is powered on and running.<\/p>\n<\/li>\n
\n
Before use, please put away various wires on the ground in the environment to avoid dragging during the host's operation.<\/p>\n<\/li>\n
\n
For safety, please ensure the robot runs at a speed of 1.2m\/s or below. Playing and fighting in front of the robot is prohibited to avoid unnecessary injuries. The robot has an automatic obstacle avoidance function, but there are blind spots in recognition. Therefore, it is strictly prohibited to suddenly block the robot while it is traveling at high speed, otherwise it may cause safety accidents.<\/p>\n<\/li>\n
\n
When transporting the robot, be sure to empty the trash in the dustbox. Tilting the machine is strictly prohibited during transportation, otherwise the body may be damaged.<\/p>\n<\/li>\n<\/ol>\n
2.2 Environmental Precautions<\/h2>\n
\n
\n
This robot is suitable for flat ground environments. It is not suitable for use in environments with steps, excessive slopes, or overly tight spaces.<\/p>\n<\/li>\n
\n
It is not recommended to use the robot on heavily oil-stained floors.<\/p>\n<\/li>\n
\n
Debris such as power cords scattered on the ground may trip or entangle the robot. Please remove them before use.<\/p>\n<\/li>\n
\n
When using this product with obvious ground protrusions such as thresholds, please ensure the height of the protrusions is within 20mm.<\/p>\n<\/li>\n
\n
5.The optimal passage width for the robot should be greater than 75 cm; for long corridors, a width greater than 80 cm is recommended for the best fluid movement.<\/p>\n<\/li>\n<\/ol>\n
$\"descript\"$ <\/p>\n
\n\n\n\n\n\n
Ground Conditions<\/strong><\/td>\n Illustration<\/strong><\/td>\n<\/tr>\n
The maximum climbing angle designed for the robot is 8° (in non-cleaning status). To prevent potential risks caused by the robot slipping backwards, you should avoid pausing the machine while the robot is going uphill.<\/td>\n $\"descript\"$ <\/td>\n<\/tr>\n
The robot only supports cleaning operations on flat surfaces. Do NOT perform cleaning tasks on visible slopes exceeding 3°.<\/td>\n $\"descript\"$ <\/td>\n<\/tr>\n
Environments with solid black surfaces (e.g., baseboards), mirrored surfaces (e.g., walls), or full transparency at a height of 14–22 cm may interfere with lidar reflections, causing abnormal navigation. These scenarios require assessment by technical support and may necessitate site modifications, such as applying stickers, to ensure proper reflection.<\/td>\n <\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
2.3 Power Supply Precautions<\/h2>\n
\n
\n
Fully charge the robot to 100% before its first use.<\/p>\n<\/li>\n
\n
To ensure operational efficiency and battery longevity, always maintain the battery level above 10%.<\/p>\n<\/li>\n
\n
When the battery drops below 10%, the robot enters a low-battery state and must be charged as soon as possible.<\/p>\n<\/li>\n
\n
When the battery drops below 2%, it enters battery protection mode; the robot will be unable to perform tasks and must be recharged before use.<\/p>\n<\/li>\n<\/ol>\n
3\u3001Product Components<\/h1>\n
3.1 Packing List<\/h2>\n
Main unit x 1, Charger x 1, Sweeping side brush x 2, Sweeping roller brush x 1, \"PUDU MT1 User Manual\" x 1, Certificate of Conformity x 1, Positioning code x 1, Warning flagpole x 1.<\/p>\n
3.2 Appearance and Parts<\/h2>\n
$\"descript\"$ <\/p>\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
\n
No.<\/strong><\/p>\n<\/td>\n
\n
Description<\/strong><\/p>\n<\/td>\n<\/tr>\n
\n
1<\/p>\n<\/td>\n
\n
Handlebar \/ Handrail<\/p>\n<\/td>\n<\/tr>\n
\n
2<\/p>\n<\/td>\n
\n
LCD Screen<\/p>\n<\/td>\n<\/tr>\n
\n
3<\/p>\n<\/td>\n
\n
Power Button (On\/Off)<\/p>\n<\/td>\n<\/tr>\n
\n
4<\/p>\n<\/td>\n
\n
Emergency Stop Switch<\/p>\n<\/td>\n<\/tr>\n
\n
5<\/p>\n<\/td>\n
\n
Screen Protector \/ Screen Cover<\/p>\n<\/td>\n<\/tr>\n
\n
6<\/p>\n<\/td>\n
\n
LiDAR<\/p>\n<\/td>\n<\/tr>\n
\n
7<\/p>\n<\/td>\n
\n
VSLAM Camera<\/p>\n<\/td>\n<\/tr>\n
\n
8<\/p>\n<\/td>\n
\n
RGB Camera<\/p>\n<\/td>\n<\/tr>\n
\n
9<\/p>\n<\/td>\n
\n
RGB-D<\/p>\n<\/td>\n<\/tr>\n
\n
10<\/p>\n<\/td>\n
\n
RGB Camera<\/p>\n<\/td>\n<\/tr>\n
\n
11<\/p>\n<\/td>\n
\n
Line Laser Sensor<\/p>\n<\/td>\n<\/tr>\n
\n
12<\/p>\n<\/td>\n
\n
Fill Light<\/p>\n<\/td>\n<\/tr>\n
\n
13<\/p>\n<\/td>\n
\n
Charging Electrode \/ Charging Contact<\/p>\n<\/td>\n<\/tr>\n
\n
14<\/p>\n<\/td>\n
\n
Line Laser Sensor<\/p>\n<\/td>\n<\/tr>\n
\n
15<\/p>\n<\/td>\n
\n
Dust Scraper Handle<\/p>\n<\/td>\n<\/tr>\n
\n
16<\/p>\n<\/td>\n
\n
RGB-D<\/p>\n<\/td>\n<\/tr>\n
\n
17<\/p>\n<\/td>\n
\n
Charging Port Cover \/ Flip Cover<\/p>\n<\/td>\n<\/tr>\n
\n
18<\/p>\n<\/td>\n
\n
Universal Wheel \/ Caster<\/p>\n<\/td>\n<\/tr>\n
\n
19<\/p>\n<\/td>\n
\n
Driving Wheel<\/p>\n<\/td>\n<\/tr>\n
\n
20<\/p>\n<\/td>\n
\n
Roller Brush \/ Main Brush<\/p>\n<\/td>\n<\/tr>\n
\n
21<\/p>\n<\/td>\n
\n
Side Brush<\/p>\n<\/td>\n<\/tr>\n
\n
22<\/p>\n<\/td>\n
\n
Air Filter<\/p>\n<\/td>\n<\/tr>\n
\n
24<\/p>\n<\/td>\n
\n
Side Brush<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
<\/span><\/p>\n
3.3 Performance Parameters<\/h2>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
\n
Product Features<\/strong><\/p>\n<\/td>\n
\n
Description<\/strong><\/p>\n<\/td>\n<\/tr>\n
\n
Product Model<\/p>\n<\/td>\n
\n
MTBC01<\/p>\n<\/td>\n<\/tr>\n
\n
Working Voltage<\/p>\n<\/td>\n
\n
DC 23V~29.2V<\/p>\n<\/td>\n<\/tr>\n
\n
Power Input<\/p>\n<\/td>\n
\n
AC 100 V ~ 240 V, 50\/60 Hz<\/p>\n<\/td>\n<\/tr>\n
\n
Power Output<\/p>\n<\/td>\n
\n
Max: 29.2 V, 20 A<\/p>\n<\/td>\n<\/tr>\n
\n
Battery Capacity<\/p>\n<\/td>\n
\n
45Ah<\/p>\n<\/td>\n<\/tr>\n
\n
Charging Time<\/p>\n<\/td>\n
\n
Approx. 3h<\/p>\n<\/td>\n<\/tr>\n
\n
Runtime \/ Battery Life<\/p>\n<\/td>\n
\n
4-8h<\/p>\n<\/td>\n<\/tr>\n
\n
Cleaning Capacity<\/p>\n<\/td>\n
\n
Paper scraps, plastic film, and other debris<\/p>\n<\/td>\n<\/tr>\n
\n
Net Weight<\/p>\n<\/td>\n
\n
Approx. 75kg<\/p>\n<\/td>\n<\/tr>\n
\n
Dimensions<\/p>\n<\/td>\n
\n
840600490mm<\/p>\n<\/td>\n<\/tr>\n
\n
Housing Material<\/p>\n<\/td>\n
\n
PC+ABS<\/p>\n<\/td>\n<\/tr>\n
\n
Screen Specifications<\/p>\n<\/td>\n
\n
10.1-inch LCD Screen<\/p>\n<\/td>\n<\/tr>\n
\n
Navigation Method<\/p>\n<\/td>\n
\n
LiDAR and Vision Fusion Positioning<\/p>\n<\/td>\n<\/tr>\n
\n
Cruising Speed<\/p>\n<\/td>\n
\n
0.2 m\/s ~ 1.2 m\/s (Adjustable)<\/p>\n<\/td>\n<\/tr>\n
\n
Operating Noise<\/p>\n<\/td>\n
\n
\uff1c75dB(A)<\/p>\n<\/td>\n<\/tr>\n
\n
Minimum Passage Width<\/p>\n<\/td>\n
\n
75 cm<\/p>\n<\/td>\n<\/tr>\n
\n
Maximum Obstacle Clearance Height<\/p>\n<\/td>\n
\n
20 mm<\/p>\n<\/td>\n<\/tr>\n
\n
Maximum Climbing Angle<\/p>\n<\/td>\n
\n
8º<\/p>\n<\/td>\n<\/tr>\n
\n
Maximum Gap Width<\/p>\n<\/td>\n
\n
30mm<\/p>\n<\/td>\n<\/tr>\n
\n
Cleaning Width (including side brushes)<\/p>\n<\/td>\n
\n
Approx. 70cm<\/p>\n<\/td>\n<\/tr>\n
\n
Dustbin Capacity<\/p>\n<\/td>\n
\n
Approx. 35L<\/p>\n<\/td>\n<\/tr>\n
\n
Operating System<\/p>\n<\/td>\n
\n
Android<\/p>\n<\/td>\n<\/tr>\n
\n
Communication Network<\/p>\n<\/td>\n
\n
Supports 4G, Wi-Fi, Bluetooth, Lora or 2.4G (Optional)<\/p>\n<\/td>\n<\/tr>\n
\n
Mobile App<\/p>\n<\/td>\n
\n
Supported<\/p>\n<\/td>\n<\/tr>\n
\n
Operation Mode<\/p>\n<\/td>\n
\n
Manual Mode, Auto Mode<\/p>\n<\/td>\n<\/tr>\n
\n
Automatic Charging<\/p>\n<\/td>\n
\n
Supported (Charging station required)<\/p>\n<\/td>\n<\/tr>\n
\n
Operating Environment (including charging)<\/p>\n<\/td>\n
\n
Temp: 0°C ~ 40 °C; Humidity: ≤ 90% RH<\/p>\n<\/td>\n<\/tr>\n
\n
Storage Environment<\/p>\n<\/td>\n
\n
Temp: -20 °C ~ 70 °C; Humidity: ≤ 90% RH<\/p>\n<\/td>\n<\/tr>\n
\n
Operating Altitude<\/p>\n<\/td>\n
\n
\uff1c 2000 m<\/p>\n<\/td>\n<\/tr>\n
\n
Applicable Flooring<\/p>\n<\/td>\n
\n
Polished concrete, epoxy resin, rubber, regular masonry, ceramic tile, and other hardened floors<\/p>\n<\/td>\n<\/tr>\n
\n
Protection Rating \/ IP Rating<\/p>\n<\/td>\n
\n
IPX3<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
( The battery life of each cleaning mode is calculated under the standard gear, with the battery level from 100% to 10%.)<\/p>\n
4\u3001Product Usage<\/h1>\n
4.1 Power On, Power Off, Pause, Start<\/h2>\n
4.1.1 Power On, Power Off<\/h3>\n
Power On:<\/p>\n
Press and hold the power button for about 3 seconds, the bottom strip light will show blue.<\/p>\n
$\"descript\"$ <\/p>\n
Power Off, there are 2 methods:<\/p>\n
\n
\n
Press and hold the power button for about 10 seconds to start the power off operation. A black screen indicates successful power off.<\/p>\n<\/li>\n
\n
Tap \"More\" on the home page to select \"Power Off\" or restart the robot.<\/p>\n<\/li>\n<\/ol>\n
$\"descript\"$ <\/p>\n
4.1.2 Pause<\/h3>\n
During the robot's Auto-Cleaning operation, touch to wake up the screen, and tap the Pause button to stop the robot.<\/p>\n
$\"descript\"$ <\/p>\n
4.1.3 Start<\/h3>\n
If you need to continue running, tap the Start button on the screen, and the robot will resume the task.<\/p>\n
$\"descript\"$ <\/p>\n
4.2 Handle Usage<\/h2>\n
When you need to push the robot, please lift the handrail.<\/p>\n
When the robot is idle or operating automatically, please put the handrail down.<\/p>\n
$\"descript\"$ <\/p>\n
When you need to operate the screen, you can open the protective cover and operate it directly, or detach the screen from the top of the body and hold it or fix it on the handrail to operate. <\/p>\n
$\"descript\"$ <\/p>\n
* The robot handle and screen feature a detachable design.<\/p>\n
4.3 Work Modes<\/h2>\n
4.3.1 Manual Cleaning<\/h3>\n
After clicking \"Manual Cleaning\" on the homepage, adjust the desired cleaning gear, click \"Start Cleaning\", and you can push the robot to perform the cleaning task.<\/p>\n
$\"descript\"$ <\/p>\n
$\"descript\"$ <\/p>\n
4.3.2 Automatic Cleaning<\/h3>\n
Before starting an automatic cleaning task, ensure the robot is powered on and positioned directly below or in front of the visual marker (depending on the marker's placement) to ensure successful positioning at the starting point.<\/p>\n
$\"descript\"$ $\"descript\"$ <\/p>\n
After clicking \"Automatic Cleaning\" on the homepage, select the cleaning task to be executed (pre-configured by delivery personnel). If no selection is made, the default task will be executed. Click \"Start Cleaning\" to begin the task. (Note: For automatic cleaning, the handle must be lowered and the screen returned to the screen compartment; otherwise, the task cannot start normally.)<\/p>\n
$\"descript\"$ $\"descript\"$ <\/p>\n
4.3.3 Scheduled Task Settings<\/h3>\n
The robot supports scheduled task settings. Once configured, the robot will automatically execute tasks at the set time, provided that positioning is normal and the battery level is sufficient.<\/p>\n
$\"descript\"$ $\"descript\"$ <\/p>\n
$\"descript\"$ $\"descript\"$ <\/p>\n
4.4 Cleaning Modes<\/h2>\n
The PUDU MT1 robot is an AI-powered sweeping robot designed for large-scale scenarios and ultimate cleaning performance. It uses side brushes to sweep in debris and a roller brush to throw it into the dustbin.<\/p>\n
Before cleaning, please ensure the robot has the corresponding cleaning components installed:<\/p>\n
\n
\n
Side brushes<\/p>\n<\/li>\n
\n
Roller brush<\/p>\n<\/li>\n<\/ol>\n
$\"descript\"$ <\/p>\n
4.6 Robot Charging<\/h2>\n
MT1 supports both manual and automatic charging.<\/p>\n
\n\n\n\n\n
Charging Method<\/strong><\/td>\n <\/td>\n<\/tr>\n
\n
Manual Charging<\/strong><\/p>\n
Connect the robot's charging interface to the charging cable. Ensure the body's charging port is connected to the charging cable. If successful, the robot will prompt that it is charging.<\/p>\n<\/td>\n
$\"descript\"$ <\/td>\n<\/tr>\n
\n
Automatic Charging<\/strong><\/p>\n
The robot supports automatic charging, which requires the optional purchase and installation of a workstation or charging pile, deployed according to the corresponding equipment’s instructions. Once deployed, the robot can perform fully autonomous recharging throughout the entire process.<\/p>\n<\/td>\n
\n
$\"descript\"$ <\/p>\n
Robot docking with the charging station.<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
Charing Page<\/p>\n
$\"descript\"$ <\/p>\n
4.7 Viewing Device Status<\/strong><\/h2>\n
Tap \"Device Status\" on the home page to enter the Device Status page.<\/p>\n
On this page, you can check the robot's battery level and the remaining usage time of the corresponding consumables.<\/p>\n
$\"descript\"$ <\/p>\n
$\"descript\"$ <\/p>\n
4.8 Settings<\/h2>\n
Settable items include the following:<\/p>\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Settings Item<\/strong><\/td>\n Description<\/strong><\/td>\n<\/tr>\n
Task Management<\/td>\n Add, modify, and delete cleaning tasks.<\/td>\n<\/tr>\n
Cleaning Report<\/td>\n View records of the robot's past cleaning reports.<\/td>\n<\/tr>\n
Network<\/td>\n Configure network settings and connections.<\/td>\n<\/tr>\n
Map<\/td>\n Create new maps, edit existing maps, etc.<\/td>\n<\/tr>\n
Language<\/td>\n Select the corresponding national language.<\/td>\n<\/tr>\n
Version Upgrade<\/td>\n Check for the latest software version upgrades.<\/td>\n<\/tr>\n
Speed<\/td>\n Set speeds for different cleaning modes; default speed is 0.5 m\/s.<\/td>\n<\/tr>\n
Screen Lock Protection<\/td>\n Enable or disable screen lock; modify screen lock password and duration.<\/td>\n<\/tr>\n
Debugging<\/td>\n \n
Adjust internal parameters (accessible only to technical support personnel).<\/p>\n
The company assumes no responsibility for accidents caused by unauthorized operation.<\/p>\n<\/td>\n<\/tr>\n
Voice \/ Audio<\/td>\n Enable or disable voice broadcasts during cleaning; configure content and volume.<\/td>\n<\/tr>\n
Time<\/td>\n Set the robot's system time.<\/td>\n<\/tr>\n
Version Upgrade<\/td>\n Display and click to update the robot's software version.<\/td>\n<\/tr>\n
Debugging<\/td>\n \n
Adjust internal parameters (accessible only to technical support personnel).<\/p>\n
The company assumes no responsibility for accidents caused by unauthorized operation.<\/p>\n<\/td>\n<\/tr>\n
Others<\/td>\n Other robot settings.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
4.9 Common Functions<\/h2>\n
4.9.1 Cleaning Task Settings<\/h5>\n
01 Confirm the minimum sum of length and width for RGBD obstacle determination<\/p>\n
Based on the site conditions, confirm the sum of the height of common debris and the length and width of low obstacles in the site to ensure that larger debris is not falsely detected as an obstacle.<\/p>\n
\n
<\/div>\n
\n
\n
<\/span><\/p>\n<\/div>\n<\/div>\n<\/div>\n
02 Select maintenance point<\/p>\n
Add maintenance points during mapping, and select them when editing tasks. After setting, when the robot encounters exceptions or errors where it cannot continue cleaning but can move normally, it can go to the maintenance point automatically and wait for manual assistance.<\/p>\n
$\"descript\"$ <\/p>\n
03 Sleep time period<\/p>\n
Supports configuring sleep time on the robot end by date. Scheduled tasks set within the sleep time will not start automatically. Also supports batch setting of sleep time for robots in the same store on Pudulink and merchant platforms.<\/p>\n
$\"descript\"$ <\/p>\n
04 AI Cleaning<\/p>\n
(1) Supports recognition of debris and stains with automatic adjustment of cleaning mechanism parameters. In patrol cleaning mode, it supports proactive navigation to identified debris for cleaning; specific types of debris and stains for proactive recognition can be selected from a list.<\/p>\n
(2) Supports obstacle recognition and avoidance; specific obstacle types for avoidance can be selected from a list.<\/p>\n
$\"descript\"$ <\/p>\n
$\"descript\"$ $\"descript\"$ <\/p>\n
05 Ultra Spot Clean<\/p>\n
Supports Ultra Spot Clean for automated tasks. Based on debris\/stain recognition heatmap data from the task, it performs high-speed cleaning in areas with a higher probability of generating waste. $\"descript\"$ $\"descript\"$ <\/p>\n
06 AI Auto\/Manual Exemption<\/p>\n
Supports \"exemption\" processing for floor patterns or designs prone to being misidentified as stains through two methods: manual validation or automatic learning. Once exempted, the robot will no longer trigger false identifications at that location in subsequent cleaning tasks.<\/p>\n
$\"descript\"$ $\"descript\"$ <\/p>\n
4.9.2 Product Interaction Settings<\/h5>\n
01 Multi-language Switching<\/p>\n
Switch the language of the operating system<\/p>\n
$\"descript\"$ <\/p>\n
02 Metric and Imperial Unit Switching<\/p>\n
When enabled, imperial units will be displayed<\/p>\n
$\"descript\"$ <\/p>\n
03 Play voice and music during operation<\/p>\n
$\"descript\"$ $\"descript\"$ <\/p>\n
5\u3001Product Maintenance & Troubleshooting<\/h1>\n
5.1 Daily Cleaning<\/h2>\n
5.1.1 Cleaning Sensors and the Underside of the Robot<\/h3>\n
Sensors are the robot's eyes. If they are obscured by dust, the robot will clean blindly; therefore, regular cleaning is required.<\/p>\n
\n\n\n\n\n
Cleaning Method<\/td>\n Wipe with a soft, clean cloth<\/td>\n<\/tr>\n
Period<\/td>\n 3-5 weeks<\/td>\n<\/tr>\n
Body Sensor Diagram<\/td>\n \n
<\/div>\n
\n
\n
<\/span><\/p>\n<\/div>\n<\/div>\n $\"descript\"$ <\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
5.1.2 Cleaning the Dustbox and Air Filter<\/h3>\n
Accumulation of garbage and dust can breed bacteria and affect cleaning effectiveness. Please clean it in time.<\/p>\n
\n\n\n\n\n\n
Cleaning Method<\/td>\n \n
1. Dustbox: Take out the dustbox to empty the garbage when it is full or regularly.<\/p>\n
2. Air Filter: Use the dust scraping handle for daily cleaning. Put a garbage bag over it and pat it gently on a regular basis. Replace it directly if it is too dirty. Washing with water is not recommended.<\/p>\n<\/td>\n<\/tr>\n
Period<\/td>\n Clean every 2 days, or clean once or multiple times a day depending on the degree of dirt.<\/td>\n<\/tr>\n
Cleaning Illustration<\/td>\n \n
Dustbox<\/p>\n
$\"descript\"$ $\"descript\"$ <\/p>\n<\/td>\n<\/tr>\n
\n
Fan Filter<\/p>\n
(1) Manual Dust Shaking<\/p>\n
$\"descript\"$ $\"descript\"$ <\/p>\n
(2) Remove and Clean<\/p>\n
$\"descript\"$ $\"descript\"$ <\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
5.1.3 Cleaning the Side Brush and Brush<\/h3>\n
Hair and fine fabrics will entangle on the side brush and brush during operation. Failure to clean them for a long time will affect the cleaning effectiveness and even the service life of the motor.<\/p>\n
\n\n\n\n\n\n
Cleaning Method<\/td>\n Use a brush or hands to clean the side brush and brush, and remove tangles.<\/td>\n<\/tr>\n
Period<\/td>\n Clean every 2 days, or clean once or multiple times a day depending on the degree of dirt.<\/td>\n<\/tr>\n
Cleaning Illustration<\/td>\n \n
Side Brush Cleaning<\/p>\n
$\"descript\"$ <\/p>\n<\/td>\n<\/tr>\n
\n
Roller Brush Cleaning<\/p>\n
$\"descript\"$ <\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
5.2 Consumable Replacement<\/h2>\n\n\n\n\n\n\n\n\n\n\n\n\n
Part Illustration<\/strong><\/td>\n Location<\/strong><\/td>\n Part Name<\/strong><\/td>\n Maintenance Method<\/strong><\/td>\n Maintenance Period<\/strong><\/td>\n<\/tr>\n
$\"descript\"$ <\/td>\n $\"descript\"$ <\/td>\n Side Brush<\/td>\n Clean<\/td>\n 1 time\/day<\/td>\n<\/tr>\n
Replace<\/td>\n 6-12 months<\/td>\n<\/tr>\n
$\"descript\"$ <\/td>\n $\"descript\"$ <\/td>\n Brush<\/td>\n Clean<\/td>\n 1 time\/day<\/td>\n<\/tr>\n
Replace<\/td>\n 6-12 months<\/td>\n<\/tr>\n
$\"descript\"$ <\/td>\n $\"descript\"$ <\/td>\n Air Filter<\/td>\n Scrape Dust<\/td>\n 1 time\/day<\/td>\n<\/tr>\n
$\"descript\"$ <\/td>\n Clean<\/td>\n 1 time\/day<\/td>\n<\/tr>\n
Replace<\/td>\n 3-6 months<\/td>\n<\/tr>\n
$\"descript\"$ <\/td>\n $\"descript\"$ <\/td>\n Front Rubber Strip<\/td>\n Replace<\/td>\n 6-12 months<\/td>\n<\/tr>\n
$\"descript\"$ <\/td>\n $\"descript\"$ <\/td>\n Rear Rubber Strip<\/td>\n Replace<\/td>\n 6-12 months<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
(The replacement timing for the aforementioned consumables can be determined by referring to the \"Consumables\" status page on the robot's status screen.)<\/p>\n
5.3 Troubleshooting<\/h2>\n\n\n\n\n\n\n
Fault<\/strong><\/td>\n Troubleshooting Steps<\/strong><\/td>\n<\/tr>\n
Unable to power on<\/td>\n \n
\n
\n
Check if the robot's battery is too low, and use the power adapter to charge the robot;<\/p>\n<\/li>\n
\n
If the power adapter cannot charge, the battery may be exhausted (left for more than 30 days). You need to take out the battery and use the battery direct charging cable to charge the battery.<\/p>\n<\/li>\n<\/ol>\n<\/td>\n<\/tr>\n
Unable to sweep garbage<\/td>\n \n
\n
\n
Check if the dustbin is full. If so, pull out the dustbin and empty the debris before proceeding with the operation.<\/p>\n<\/li>\n
\n
For heavier debris, the side brush gear can be adjusted to \"Powerful\" mode.<\/p>\n<\/li>\n<\/ol>\n<\/td>\n<\/tr>\n
Garbage being scattered<\/td>\n If the debris is lightweight and being blown away by the airflow from the side brushes, the side brush gear can be adjusted to \"Eco\" mode.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
After-Sales Policy<\/h1>\n
Shenzhen Pudu Technology Co., Ltd. promises to provide free product warranty services starting from the date of product activation within the valid warranty period (warranty periods may vary for different components), and customers are not required to pay after-sales service fees. For cases exceeding the warranty period or not falling under the free warranty service, fees will be charged according to standard prices. Customers should contact the official after-sales service hotline to arrange repairs.<\/p>\n
Pudu Technology will provide warranty service if the following conditions are met:\uff1a<\/p>\n
1\u3001Within the product warranty period:<\/p>\n
\n
\n
Non-human quality issues occur under normal use.<\/p>\n<\/li>\n
\n
No unauthorized disassembly or repair; no water or foreign object ingress; no collision or drop.<\/p>\n<\/li>\n
\n
The product serial number, factory labels, and other markings show no signs of tearing or tampering.<\/p>\n<\/li>\n
\n
Valid proof of purchase, receipts, and order numbers are provided.<\/p>\n<\/li>\n
\n
Damaged spare parts replaced during the warranty period belong to Pudu Technology.<\/p>\n<\/li>\n<\/ol>\n
2\u3001Pudu Technology will charge for repairs in any of the following situations:<\/p>\n
\n
\n
The product exceeds the warranty period.<\/p>\n<\/li>\n
\n
The product serial number, factory labels, or other markings are torn, tampered with, or unrecognizable.<\/p>\n<\/li>\n
\n
Quality issues caused by collisions or burning not resulting from the product's own quality, or ingress of foreign objects (water, oil, sand, etc.).<\/p>\n<\/li>\n
\n
Damage caused by unauthorized modification, disassembly, opening of the shell, or repairs not guided by official instructions.<\/p>\n<\/li>\n
\n
Damage caused by incorrect installation, use, charging, or storage not in accordance with the product manual and installation guide.<\/p>\n<\/li>\n
\n
Damage caused by using cleaning detergents not specified in official instructions.<\/p>\n<\/li>\n
\n
Failure of accessories or components other than the main warranty parts.<\/p>\n<\/li>\n
\n
Faults or damage caused by force majeure (such as earthquakes, fires, or wars). <\/p>\n<\/li>\n<\/ol>\n
After-sales Service Consultation:<\/p>\n
If you have any questions, please contact Pudu Technology Headquarters:<\/p>\n
Official After-sales Email: techservice@pudutech.com<\/p>\n
Official After-sales Hotline: 400-0826-660<\/p>","pure_content":"PUDU_MT1_Operation_Guide.pdf\nDocument Version: V5.0\nModel: MTBC01\nCopyright \u00a9 2026 Shenzhen Pudu Technology Co., Ltd. All rights reserved.\nWithout the express written consent of Shenzhen Pudu Technology Co., Ltd., no unit or individual may imitate, copy, transcribe or translate part or all of the contents of this operation guide without authorization, and shall not distribute it in any way (electronic, photocopying, recording, etc.) for profit. The product specifications and information mentioned in this operation guide are for reference only, and are subject to change without further notice. Unless otherwise specified, this operation guide is only used as a guide, and all statements made do not constitute any form of warranty.\nPurpose\nThis manual introduces how to use and maintain the PUDU MT1. It is intended for users, sales personnel, technical support engineers, and installation and commissioning engineers.\nRevision History\n\n\n\n Date\n Revision History\n\n\n 2026.02.27\n Initial release\n\n\n \u00a0\n \u00a0\n\n\n \u00a0\n \u00a0\n\n\n \u00a0\n \u00a0\n\n\n\nSymbol Convetions\nThe following symbols may appear in this manual, and their meanings are as follows.\n\n\n\n Symbol\n Description\n\n\n Danger\n Indicates a high potential hazard that, if not avoided, will result in death or serious injury.\n\n\n Warning\n Indicates a moderate or low potential hazard that, if not avoided, could result in minor injury to personnel, damage to the robot, etc.\n\n\n Caution\n Indicates a potential risk that, if these texts are ignored, could result in damage to the robot, data loss, or unpredictable results.\n\n\n Notes\n Indicates additional information to the main text, emphasizing and supplementing the main text.\n\n\n\nContents\nPurpose 1\nRevision History 1\nSymbol Convetions 2\n1\u3001Intended Use 3\n2\u3001Safety Instructions 4\n2.1 Usage Precautions 4\n2.2 Environmental Precautions 5\n2.3 Power Supply Precautions 6\n3\u3001Product Components 6\n3.1 Packing List 6\n3.2 Appearance and Parts 6\n3.3 Performance Parameters 8\n4\u3001Product Usage 9\n4.1 Power On, Power Off, Pause, Start 9\n4.1.1 Power On, Power Off 9\n4.1.2 Pause 10\n4.1.3 Start 10\n4.2 Handle Usage 11\n4.3 Work Modes 12\n4.3.1 Manual Cleaning 12\n4.3.2 Automatic Cleaning 13\n4.3.3 Scheduled Task Settings 13\n4.4 Cleaning Modes 14\n4.6 Robot Charging 15\n4.7 Viewing Device Status 16\n4.8 Settings 17\n4.9 Common Functions 17\n5\u3001Product Maintenance & Troubleshooting 22\n5.1 Daily Cleaning 22\n5.1.1 Cleaning Sensors and the Underside of the Robot 22\n5.1.2 Cleaning the Dustbox and Air Filter 22\n5.1.3 Cleaning the Side Brush and Brush 23\n5.2 Consumable Replacement 24\n5.3 Troubleshooting 24\nAfter-Sales Policy 25\n1\u3001Intended Use\n\nThe PUDU MT1 robot is a professional sweeping robot targeted at large scenarios, supporting autonomous charging. The core advantage of the product lies in its ability to meet the cleaning needs of various hard floors. Its main target scenarios are indoor environments with large debris, such as warehousing and logistics, factories, home furnishing and building materials malls, airports, and stations. While reducing costs and increasing efficiency for customers, it improves the cleaning quality of the overall environment.\n2\u3001Safety Instructions\n2.1 Usage Precautions\n\n\nThis product is a wheeled automatic cleaning robot, limited to use in flat indoor environments. Do not use it outdoors (such as open balconies), on rugged grounds (such as stairs), or in environments above 40\u2103 or below -10\u2103.\n\n\nCannot be charged below zero degrees Celsius (the robot automatically protects and cannot be charged).\n\n\nCharging in dynamic temperature environments (e.g., medium-temperature cold storage, working inside, charging outside the cold storage) requires corresponding software versions. If the robot enters the wrong position accidentally due to obstruction or other factors, please pause the task in time and push it to the correct route before continuing the task.\n\n\nDo not drag the robot during operation. If you need to push or move the robot, please tap the screen to pause it first.\n\n\nDo not push the robot in reverse while it is powered on.\n\n\nDo not block the robot's sensors, otherwise it may cause abnormal movement or loss of positioning.\n\n\nDo not pat the device or forcefully press\/knock on the screen, otherwise it may cause damage to the device.\n\n\nDo not place loads on the robot, do not place open flame stoves, and do not place any combustible solids, gases, or liquids.\n\n\nDo not make temporary setting adjustments while the robot is moving. All operations should be carried out after tapping the screen to pause the robot's driving.\n\n\nCleaning and maintenance work are prohibited while the machine is powered on and running.\n\n\nBefore use, please put away various wires on the ground in the environment to avoid dragging during the host's operation.\n\n\nFor safety, please ensure the robot runs at a speed of 1.2m\/s or below. Playing and fighting in front of the robot is prohibited to avoid unnecessary injuries. The robot has an automatic obstacle avoidance function, but there are blind spots in recognition. Therefore, it is strictly prohibited to suddenly block the robot while it is traveling at high speed, otherwise it may cause safety accidents.\n\n\nWhen transporting the robot, be sure to empty the trash in the dustbox. Tilting the machine is strictly prohibited during transportation, otherwise the body may be damaged.\n\n\n2.2 Environmental Precautions\n\n\nThis robot is suitable for flat ground environments. It is not suitable for use in environments with steps, excessive slopes, or overly tight spaces.\n\n\nIt is not recommended to use the robot on heavily oil-stained floors.\n\n\nDebris such as power cords scattered on the ground may trip or entangle the robot. Please remove them before use.\n\n\nWhen using this product with obvious ground protrusions such as thresholds, please ensure the height of the protrusions is within 20mm.\n\n\n5.The optimal passage width for the robot should be greater than 75 cm; for long corridors, a width greater than 80 cm is recommended for the best fluid movement.\n\n\n\n\n\n\n Ground Conditions\n Illustration\n\n\n The maximum climbing angle designed for the robot is 8\u00b0 (in non-cleaning status). To prevent potential risks caused by the robot slipping backwards, you should avoid pausing the machine while the robot is going uphill.\n \n\n\n The robot only supports cleaning operations on flat surfaces. Do NOT perform cleaning tasks on visible slopes exceeding 3\u00b0.\n \n\n\n Environments with solid black surfaces (e.g., baseboards), mirrored surfaces (e.g., walls), or full transparency at a height of 14\u201322 cm may interfere with lidar reflections, causing abnormal navigation. These scenarios require assessment by technical support and may necessitate site modifications, such as applying stickers, to ensure proper reflection.\n \u00a0\n\n\n\n2.3 Power Supply Precautions\n\n\nFully charge the robot to 100% before its first use.\n\n\nTo ensure operational efficiency and battery longevity, always maintain the battery level above 10%.\n\n\nWhen the battery drops below 10%, the robot enters a low-battery state and must be charged as soon as possible.\n\n\nWhen the battery drops below 2%, it enters battery protection mode; the robot will be unable to perform tasks and must be recharged before use.\n\n\n3\u3001Product Components\n3.1 Packing List\nMain unit x 1, Charger x 1, Sweeping side brush x 2, Sweeping roller brush x 1, \"PUDU MT1 User Manual\" x 1, Certificate of Conformity x 1, Positioning code x 1, Warning flagpole x 1.\n3.2 Appearance and Parts\n\n\n\n\n No.\n Description\n\n\n 1\n Handlebar \/ Handrail\n\n\n 2\n LCD Screen\n\n\n 3\n Power Button (On\/Off)\n\n\n 4\n Emergency Stop Switch\n\n\n 5\n Screen Protector \/ Screen Cover\n\n\n 6\n LiDAR\n\n\n 7\n VSLAM Camera\n\n\n 8\n RGB Camera\n\n\n 9\n RGB-D\n\n\n 10\n RGB Camera\n\n\n 11\n Line Laser Sensor\n\n\n 12\n Fill Light\n\n\n 13\n Charging Electrode \/ Charging Contact\n\n\n 14\n Line Laser Sensor\n\n\n 15\n Dust Scraper Handle\n\n\n 16\n RGB-D\n\n\n 17\n Charging Port Cover \/ Flip Cover\n\n\n 18\n Universal Wheel \/ Caster\n\n\n 19\n Driving Wheel\n\n\n 20\n Roller Brush \/ Main Brush\n\n\n 21\n Side Brush\n\n\n 22\n Air Filter\n\n\n 24\n Side Brush\n\n\n\n\n3.3 Performance Parameters\n\n\n\n Product Features\n Description\n\n\n Product Model\n MTBC01\n\n\n Working Voltage\n DC 23V~29.2V\n\n\n Power Input\n AC 100 V ~ 240 V, 50\/60 Hz\n\n\n Power Output\n Max: 29.2 V, 20 A\n\n\n Battery Capacity\n 45Ah\n\n\n Charging Time\n Approx. 3h\n\n\n Runtime \/ Battery Life\n 4-8h\n\n\n Cleaning Capacity\n Paper scraps, plastic film, and other debris\n\n\n Net Weight\n Approx. 75kg\n\n\n Dimensions\n 840600490mm\n\n\n Housing Material\n PC+ABS\n\n\n Screen Specifications\n 10.1-inch LCD Screen\n\n\n Navigation Method\n LiDAR and Vision Fusion Positioning\n\n\n Cruising Speed\n 0.2 m\/s ~ 1.2 m\/s (Adjustable)\n\n\n Operating Noise\n \uff1c75dB(A)\n\n\n Minimum Passage Width\n 75 cm\n\n\n Maximum Obstacle Clearance Height\n 20 mm\n\n\n Maximum Climbing Angle\n 8\u00ba\n\n\n Maximum Gap Width\n 30mm\n\n\n Cleaning Width (including side brushes)\n Approx. 70cm\n\n\n Dustbin Capacity\n Approx. 35L\n\n\n Operating System\n Android\n\n\n Communication Network\n Supports 4G, Wi-Fi, Bluetooth, Lora or 2.4G (Optional)\n\n\n Mobile App\n Supported\n\n\n Operation Mode\n Manual Mode, Auto Mode\n\n\n Automatic Charging\n Supported (Charging station required)\n\n\n Operating Environment (including charging)\n Temp: 0\u00b0C ~ 40 \u00b0C; Humidity: \u2264 90% RH\n\n\n Storage Environment\n Temp: -20 \u00b0C ~ 70 \u00b0C; Humidity: \u2264 90% RH\n\n\n Operating Altitude\n \uff1c 2000 m\n\n\n Applicable Flooring\n Polished concrete, epoxy resin, rubber, regular masonry, ceramic tile, and other hardened floors\n\n\n Protection Rating \/ IP Rating\n IPX3\n\n\n\n( The battery life of each cleaning mode is calculated under the standard gear, with the battery level from 100% to 10%.)\n4\u3001Product Usage\n4.1 Power On, Power Off, Pause, Start\n4.1.1 Power On, Power Off\nPower On:\nPress and hold the power button for about 3 seconds, the bottom strip light will show blue.\n\nPower Off, there are 2 methods:\n\n\nPress and hold the power button for about 10 seconds to start the power off operation. A black screen indicates successful power off.\n\n\nTap \"More\" on the home page to select \"Power Off\" or restart the robot.\n\n\n\n4.1.2 Pause\nDuring the robot's Auto-Cleaning operation, touch to wake up the screen, and tap the Pause button to stop the robot.\n\n4.1.3 Start\nIf you need to continue running, tap the Start button on the screen, and the robot will resume the task.\n\n4.2 Handle Usage\nWhen you need to push the robot, please lift the handrail.\nWhen the robot is idle or operating automatically, please put the handrail down.\n\nWhen you need to operate the screen, you can open the protective cover and operate it directly, or detach the screen from the top of the body and hold it or fix it on the handrail to operate.\u00a0\n\n* The robot handle and screen feature a detachable design.\n4.3 Work Modes\n4.3.1 Manual Cleaning\nAfter clicking \"Manual Cleaning\" on the homepage, adjust the desired cleaning gear, click \"Start Cleaning\", and you can push the robot to perform the cleaning task.\n\n\n4.3.2 Automatic Cleaning\nBefore starting an automatic cleaning task, ensure the robot is powered on and positioned directly below or in front of the visual marker (depending on the marker's placement) to ensure successful positioning at the starting point.\n\nAfter clicking \"Automatic Cleaning\" on the homepage, select the cleaning task to be executed (pre-configured by delivery personnel). If no selection is made, the default task will be executed. Click \"Start Cleaning\" to begin the task. (Note: For automatic cleaning, the handle must be lowered and the screen returned to the screen compartment; otherwise, the task cannot start normally.)\n\n4.3.3 Scheduled Task Settings\nThe robot supports scheduled task settings. Once configured, the robot will automatically execute tasks at the set time, provided that positioning is normal and the battery level is sufficient.\n\n\n4.4 Cleaning Modes\nThe PUDU MT1 robot is an AI-powered sweeping robot designed for large-scale scenarios and ultimate cleaning performance. It uses side brushes to sweep in debris and a roller brush to throw it into the dustbin.\nBefore cleaning, please ensure the robot has the corresponding cleaning components installed:\n\n\nSide brushes\n\n\nRoller brush\n\n\n\n4.6 Robot Charging\nMT1 supports both manual and automatic charging.\n\n\n\n Charging Method\n \u00a0\n\n\n Manual Charging\nConnect the robot's charging interface to the charging cable. Ensure the body's charging port is connected to the charging cable. If successful, the robot will prompt that it is charging.\n \n\n\n Automatic Charging\nThe robot supports automatic charging, which requires the optional purchase and installation of a workstation or charging pile, deployed according to the corresponding equipment\u2019s instructions. Once deployed, the robot can perform fully autonomous recharging throughout the entire process.\n Robot docking with the charging station.\n\n\n\nCharing Page\n\n4.7 Viewing Device Status\nTap \"Device Status\" on the home page to enter the Device Status page.\nOn this page, you can check the robot's battery level and the remaining usage time of the corresponding consumables.\n\n\n4.8 Settings\nSettable items include the following:\n\n\n\n Settings Item\n Description\n\n\n Task Management\n Add, modify, and delete cleaning tasks.\n\n\n Cleaning Report\n View records of the robot's past cleaning reports.\n\n\n Network\n Configure network settings and connections.\n\n\n Map\n Create new maps, edit existing maps, etc.\n\n\n Language\n Select the corresponding national language.\n\n\n Version Upgrade\n Check for the latest software version upgrades.\n\n\n Speed\n Set speeds for different cleaning modes; default speed is 0.5 m\/s.\n\n\n Screen Lock Protection\n Enable or disable screen lock; modify screen lock password and duration.\n\n\n Debugging\n Adjust internal parameters (accessible only to technical support personnel).\nThe company assumes no responsibility for accidents caused by unauthorized operation.\n\n\n Voice \/ Audio\n Enable or disable voice broadcasts during cleaning; configure content and volume.\n\n\n Time\n Set the robot's system time.\n\n\n Version Upgrade\n Display and click to update the robot's software version.\n\n\n Debugging\n Adjust internal parameters (accessible only to technical support personnel).\nThe company assumes no responsibility for accidents caused by unauthorized operation.\n\n\n Others\n Other robot settings.\n\n\n\n4.9 Common Functions\n4.9.1 Cleaning Task Settings\n01 Confirm the minimum sum of length and width for RGBD obstacle determination\nBased on the site conditions, confirm the sum of the height of common debris and the length and width of low obstacles in the site to ensure that larger debris is not falsely detected as an obstacle.\n\n\u00a0\n\n\n\n\n\n\n02 Select maintenance point\nAdd maintenance points during mapping, and select them when editing tasks. After setting, when the robot encounters exceptions or errors where it cannot continue cleaning but can move normally, it can go to the maintenance point automatically and wait for manual assistance.\n\n03 Sleep time period\nSupports configuring sleep time on the robot end by date. Scheduled tasks set within the sleep time will not start automatically. Also supports batch setting of sleep time for robots in the same store on Pudulink and merchant platforms.\n\n04 AI Cleaning\n(1) Supports recognition of debris and stains with automatic adjustment of cleaning mechanism parameters. In patrol cleaning mode, it supports proactive navigation to identified debris for cleaning; specific types of debris and stains for proactive recognition can be selected from a list.\n(2) Supports obstacle recognition and avoidance; specific obstacle types for avoidance can be selected from a list.\n\n\n05 Ultra Spot Clean\nSupports Ultra Spot Clean for automated tasks. Based on debris\/stain recognition heatmap data from the task, it performs high-speed cleaning in areas with a higher probability of generating waste.\n06 AI Auto\/Manual Exemption\nSupports \"exemption\" processing for floor patterns or designs prone to being misidentified as stains through two methods: manual validation or automatic learning. Once exempted, the robot will no longer trigger false identifications at that location in subsequent cleaning tasks.\n\n4.9.2 Product Interaction Settings\n01 Multi-language Switching\nSwitch the language of the operating system\n\n02 Metric and Imperial Unit Switching\nWhen enabled, imperial units will be displayed\n\n03 Play voice and music during operation\n\n5\u3001Product Maintenance & Troubleshooting\n5.1 Daily Cleaning\n5.1.1 Cleaning Sensors and the Underside of the Robot\nSensors are the robot's eyes. If they are obscured by dust, the robot will clean blindly; therefore, regular cleaning is required.\n\n\n\n Cleaning Method\n Wipe with a soft, clean cloth\n\n\n Period\n 3-5 weeks\n\n\n Body Sensor Diagram\n \u00a0\n\n\n\n5.1.2 Cleaning the Dustbox and Air Filter\nAccumulation of garbage and dust can breed bacteria and affect cleaning effectiveness. Please clean it in time.\n\n\n\n Cleaning Method\n 1. Dustbox: Take out the dustbox to empty the garbage when it is full or regularly.\n2. Air Filter: Use the dust scraping handle for daily cleaning. Put a garbage bag over it and pat it gently on a regular basis. Replace it directly if it is too dirty. Washing with water is not recommended.\n\n\n Period\n Clean every 2 days, or clean once or multiple times a day depending on the degree of dirt.\n\n\n Cleaning Illustration\n Dustbox\n\n\n Fan Filter\n(1) Manual Dust Shaking\n\n(2) Remove and Clean\n\n\n\n5.1.3 Cleaning the Side Brush and Brush\nHair and fine fabrics will entangle on the side brush and brush during operation. Failure to clean them for a long time will affect the cleaning effectiveness and even the service life of the motor.\n\n\n\n Cleaning Method\n Use a brush or hands to clean the side brush and brush, and remove tangles.\n\n\n Period\n Clean every 2 days, or clean once or multiple times a day depending on the degree of dirt.\n\n\n Cleaning Illustration\n Side Brush Cleaning\n\n\n Roller Brush Cleaning\n\n\n\n5.2 Consumable Replacement\n\n\n\n Part Illustration\n Location\n Part Name\n Maintenance Method\n Maintenance Period\n\n\n \n \n Side Brush\n Clean\n 1 time\/day\n\n\n Replace\n 6-12 months\n\n\n \n \n Brush\n Clean\n 1 time\/day\n\n\n Replace\n 6-12 months\n\n\n \n \n Air Filter\n Scrape Dust\n 1 time\/day\n\n\n \n Clean\n 1 time\/day\n\n\n Replace\n 3-6 months\n\n\n \n \n Front Rubber Strip\n Replace\n 6-12 months\n\n\n \n \n Rear Rubber Strip\n Replace\n 6-12 months\n\n\n\n(The replacement timing for the aforementioned consumables can be determined by referring to the \"Consumables\" status page on the robot's status screen.)\n5.3 Troubleshooting\n\n\n\n Fault\n Troubleshooting Steps\n\n\n Unable to power on\n Check if the robot's battery is too low, and use the power adapter to charge the robot;\n\n\nIf the power adapter cannot charge, the battery may be exhausted (left for more than 30 days). You need to take out the battery and use the battery direct charging cable to charge the battery.\n\n\n Unable to sweep garbage\n Check if the dustbin is full. If so, pull out the dustbin and empty the debris before proceeding with the operation.\n\n\nFor heavier debris, the side brush gear can be adjusted to \"Powerful\" mode.\n\n\n Garbage being scattered\n If the debris is lightweight and being blown away by the airflow from the side brushes, the side brush gear can be adjusted to \"Eco\" mode.\n\n\n\nAfter-Sales Policy\nShenzhen Pudu Technology Co., Ltd. promises to provide free product warranty services starting from the date of product activation within the valid warranty period (warranty periods may vary for different components), and customers are not required to pay after-sales service fees. For cases exceeding the warranty period or not falling under the free warranty service, fees will be charged according to standard prices. Customers should contact the official after-sales service hotline to arrange repairs.\nPudu Technology will provide warranty service if the following conditions are met:\uff1a\n1\u3001Within the product warranty period:\n\n\nNon-human quality issues occur under normal use.\n\n\nNo unauthorized disassembly or repair; no water or foreign object ingress; no collision or drop.\n\n\nThe product serial number, factory labels, and other markings show no signs of tearing or tampering.\n\n\nValid proof of purchase, receipts, and order numbers are provided.\n\n\nDamaged spare parts replaced during the warranty period belong to Pudu Technology.\n\n\n2\u3001Pudu Technology will charge for repairs in any of the following situations:\n\n\nThe product exceeds the warranty period.\n\n\nThe product serial number, factory labels, or other markings are torn, tampered with, or unrecognizable.\n\n\nQuality issues caused by collisions or burning not resulting from the product's own quality, or ingress of foreign objects (water, oil, sand, etc.).\n\n\nDamage caused by unauthorized modification, disassembly, opening of the shell, or repairs not guided by official instructions.\n\n\nDamage caused by incorrect installation, use, charging, or storage not in accordance with the product manual and installation guide.\n\n\nDamage caused by using cleaning detergents not specified in official instructions.\n\n\nFailure of accessories or components other than the main warranty parts.\n\n\nFaults or damage caused by force majeure (such as earthquakes, fires, or wars).\u00a0\n\n\nAfter-sales Service Consultation:\nIf you have any questions, please contact Pudu Technology Headquarters:\nOfficial After-sales Email: techservice@pudutech.com\nOfficial After-sales Hotline: 400-0826-660","is_draft":"0","editor_type":"3","file_path":"","add_time":"1773334096","update_time":"1778058362"},"pure_content":"PUDU_MT1_Operation_Guide.pdf\nDocument Version: V5.0\nModel: MTBC01\nCopyright \u00a9 2026 Shenzhen Pudu Technology Co., Ltd. All rights reserved.\nWithout the express written consent of Shenzhen Pudu Technolo"},{"id":"162806","string_id":"DjACg48P","status":"1","parent_id":"783527","slug":"chan-pin-zhi-nan","order":"3","name":"MT1 Product introduction","type":"2","cover":"","cover_alt":"","desc":null,"website":"","contact":"","seo_title":"Product introduction","seo_keyword":"","seo_desc":"","share_switch":"0","share_code":"","author":"\u9093\u4f73\u7389","published_time":"1726112114","add_time":"1726110484","update_time":"1778058362","corp_auth_id":"0","verify_code_auth_id":"0","editor_type":"3","file_type":"","auth_id":"[\"-1\"]","content":{"content_id":"162806","content":"
1. Overview<\/h2>\n
<\/h2>\n
<\/p>\n
PUDU MT1 is a professional sweeping robot designed for large-scale environments. It supports autonomous charging. The core advantage of this product is its ability to meet the cleaning needs of various hard floor surfaces. Its typical application environments include warehouses, factories, home improvement centers, airports, and stations where there is a large amount of rubbish. It not only reduces costs and improves efficiency for clients but also enhances the overall cleanliness of the environment.<\/p>\n
2. Appearance and components<\/h2>\n
<\/p>\n
<\/colgroup>\n\n\n\n\n\n\n\n\n\n\n
No.<\/strong><\/td>\n Description<\/strong><\/td>\n No.<\/strong><\/td>\n Description<\/strong><\/td>\n No.<\/strong><\/td>\n Description<\/strong><\/td>\n<\/tr>\n
1<\/td>\n Handle<\/td>\n 9<\/td>\n RGBD<\/td>\n 17<\/td>\n Charging port cover<\/td>\n<\/tr>\n
2<\/td>\n LCD screen<\/td>\n 10<\/td>\n RGB camera<\/td>\n 18<\/td>\n Universal wheel<\/td>\n<\/tr>\n
3<\/td>\n Power switch button<\/td>\n 11<\/td>\n Laser sensor<\/td>\n 19<\/td>\n Drive wheel<\/td>\n<\/tr>\n
4<\/td>\n Emergency stop switch<\/td>\n 12<\/td>\n Supplementary light<\/td>\n 20<\/td>\n Sweeping brush<\/td>\n<\/tr>\n
5<\/td>\n Screen protector<\/td>\n 13<\/td>\n Charging electrode plate<\/td>\n 21<\/td>\n Side brush<\/td>\n<\/tr>\n
6<\/td>\n Lidar<\/td>\n 14<\/td>\n Laser sensor<\/td>\n 22<\/td>\n Air filter<\/td>\n<\/tr>\n
7<\/td>\n VSLAM camera<\/td>\n 15<\/td>\n Dust removal handle<\/td>\n <\/td>\n <\/td>\n<\/tr>\n
8<\/td>\n RGB camera<\/td>\n 16<\/td>\n RGBD<\/td>\n <\/td>\n <\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
3. Performance parameters and specifications<\/h2>\n<\/colgroup>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Features<\/strong><\/td>\n Description<\/strong><\/td>\n<\/tr>\n
Model<\/td>\n MTBC01<\/td>\n<\/tr>\n
Operating voltage<\/td>\n DC 23 V–29.2 V<\/td>\n<\/tr>\n
Power input<\/td>\n AC 100 V–240 V, 50\/60 Hz<\/td>\n<\/tr>\n
Power output<\/td>\n Max.: 29.2 V, 20 A<\/td>\n<\/tr>\n
Battery capacity<\/td>\n 45 Ah<\/td>\n<\/tr>\n
Charging time<\/td>\n Approximately 3 hours<\/td>\n<\/tr>\n
Runtime<\/td>\n 4 h to 8 h<\/td>\n<\/tr>\n
Cleaning capabilities<\/td>\n Shreds of paper, plastic film, etc.<\/td>\n<\/tr>\n
Weight<\/td>\n Approximately 65 kg (143 pounds)<\/td>\n<\/tr>\n
Robot dimensions (L×W×H)<\/td>\n 846049 cm (31.523.619.3 inches)<\/td>\n<\/tr>\n
Enclosure material<\/td>\n PC+ABS<\/td>\n<\/tr>\n
Screen specifications<\/td>\n 10.1-inch LCD screen<\/td>\n<\/tr>\n
Navigation method<\/td>\n Integrated lidar and visual SLAM positioning<\/td>\n<\/tr>\n
Cruise speed<\/td>\n 0.2 m\/s–1.2 m\/s (Adjustable) \/ 0.66 ft\/s–3.94 ft\/s (Adjustable)<\/td>\n<\/tr>\n
Working noise<\/td>\n \uff1c 75 dB<\/td>\n<\/tr>\n
Min. travel width<\/td>\n 75 cm (29.5 inches)<\/td>\n<\/tr>\n
Min. turning width<\/td>\n 110 cm (43.31 inches)<\/td>\n<\/tr>\n
Max. surmountable height<\/td>\n 20 mm (0.8 inch)<\/td>\n<\/tr>\n
Max. climbing angle<\/td>\n 8°<\/td>\n<\/tr>\n
Max. surmountable gap<\/td>\n 30 mm (1.18 inches)<\/td>\n<\/tr>\n
Cleaning Width (with side brushes)<\/td>\n Approximately 700 mm (Approximately 27.6 inches)<\/td>\n<\/tr>\n
Dustbin capacity<\/td>\n 35 L (1.2 ft³)<\/td>\n<\/tr>\n
Operation system<\/td>\n Android<\/td>\n<\/tr>\n
Communication<\/td>\n Support 4G, Wi-Fi, Bluetooth, Lora or 2.4G (optional)<\/td>\n<\/tr>\n
Mobile App<\/td>\n Supported<\/td>\n<\/tr>\n
Operation mode<\/td>\n Manual\/Auto<\/td>\n<\/tr>\n
Auto charging<\/td>\n Supported (in conjunction with MT1 charging station)<\/td>\n<\/tr>\n
Working environment<\/td>\n \n
Temperature: 0\u2103–40\u2103 (32\u2109–104\u2109);<\/p>\n
Humidity: ≤ 90% RH<\/p>\n<\/td>\n<\/tr>\n
Storage environment<\/td>\n \n
Temperature: -20\u2103–70\u2103 (-4\u2109–158\u2109); <\/p>\n
Humidity: ≤ 90% RH<\/p>\n<\/td>\n<\/tr>\n
Working altitude<\/td>\n \uff1c 2000 m (6561.7 ft)<\/td>\n<\/tr>\n
Application scope<\/td>\n Paved ground made of polished concrete, epoxy resin, rubber, regular brick, ceramic tiles, etc.<\/td>\n<\/tr>\n
IP rating<\/td>\n IPX3<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
(* The battery life of each cleaning mode is calculated based on the standard gear setting, with the battery starting at 100% and ending at 10%.)<\/p>","pure_content":"1. Overview\n\n\nPUDU MT1 is a professional sweeping robot designed for large-scale environments. It supports autonomous charging. The core advantage of this product is its ability to meet the cleaning needs of various hard floor surfaces. Its typical application environments include warehouses, factories, home improvement centers, airports, and stations where there is a large amount of rubbish. It not only reduces costs and improves efficiency for clients but also enhances the overall cleanliness of the environment.\n2. Appearance and components\n\n\n\n\n No.\n Description\n No.\n Description\n No.\n Description\n\n\n 1\n Handle\n 9\n RGBD\n 17\n Charging port cover\n\n\n 2\n LCD screen\n 10\n RGB camera\n 18\n Universal wheel\n\n\n 3\n Power switch button\n 11\n Laser sensor\n 19\n Drive wheel\n\n\n 4\n Emergency stop switch\n 12\n Supplementary light\n 20\n Sweeping brush\n\n\n 5\n Screen protector\n 13\n Charging electrode plate\n 21\n Side brush\n\n\n 6\n Lidar\n 14\n Laser sensor\n 22\n Air filter\n\n\n 7\n VSLAM camera\n 15\n Dust removal handle\n \u00a0\n \u00a0\n\n\n 8\n RGB camera\n 16\n RGBD\n \u00a0\n \u00a0\n\n\n\n3. Performance parameters and specifications\n\n\n\n Features\n Description\n\n\n Model\n MTBC01\n\n\n Operating voltage\n DC 23 V\u201329.2 V\n\n\n Power input\n AC 100 V\u2013240 V, 50\/60 Hz\n\n\n Power output\n Max.: 29.2 V, 20 A\n\n\n Battery capacity\n 45 Ah\n\n\n Charging time\n Approximately 3 hours\n\n\n Runtime\n 4 h to 8 h\n\n\n Cleaning capabilities\n Shreds of paper, plastic film, etc.\n\n\n Weight\n Approximately 65 kg (143 pounds)\n\n\n Robot dimensions\u00a0(L\u00d7W\u00d7H)\n 846049 cm (31.523.619.3 inches)\n\n\n Enclosure material\n PC+ABS\n\n\n Screen specifications\n 10.1-inch LCD screen\n\n\n Navigation method\n Integrated lidar and visual SLAM positioning\n\n\n Cruise speed\n 0.2 m\/s\u20131.2 m\/s (Adjustable) \/ 0.66 ft\/s\u20133.94 ft\/s (Adjustable)\n\n\n Working noise\n \uff1c 75 dB\n\n\n Min. travel width\n 75 cm (29.5 inches)\n\n\n Min. turning width\n 110 cm (43.31 inches)\n\n\n Max. surmountable height\n 20 mm (0.8 inch)\n\n\n Max. climbing angle\n 8\u00b0\n\n\n Max. surmountable gap\n 30 mm (1.18 inches)\n\n\n Cleaning Width (with side brushes)\n Approximately 700 mm (Approximately 27.6 inches)\n\n\n Dustbin capacity\n 35 L (1.2 ft\u00b3)\n\n\n Operation system\n Android\n\n\n Communication\n Support 4G, Wi-Fi, Bluetooth, Lora or 2.4G (optional)\n\n\n Mobile App\n Supported\n\n\n Operation mode\n Manual\/Auto\n\n\n Auto charging\n Supported (in conjunction with MT1 charging station)\n\n\n Working environment\n Temperature: 0\u2103\u201340\u2103 (32\u2109\u2013104\u2109);\nHumidity: \u2264 90% RH\n\n\n Storage environment\n Temperature: -20\u2103\u201370\u2103 (-4\u2109\u2013158\u2109);\u00a0\nHumidity: \u2264 90% RH\n\n\n Working altitude\n \uff1c 2000 m (6561.7 ft)\n\n\n Application scope\n Paved ground made of polished concrete, epoxy resin, rubber, regular brick, ceramic tiles, etc.\n\n\n IP rating\n IPX3\n\n\n\n(* The battery life of each cleaning mode is calculated based on the standard gear setting, with the battery starting at 100% and ending at 10%.)","is_draft":"0","editor_type":"3","file_path":"","add_time":"1726110484","update_time":"1778058362"},"pure_content":"1. Overview\n\n\nPUDU MT1 is a professional sweeping robot designed for large-scale environments. It supports autonomous charging. The core advantage of this product is its ability to meet the cleaning n"},{"id":"162856","string_id":"ubKEyyP0","status":"1","parent_id":"783527","slug":"kuai-su-shi-yong-uQoh","order":"2","name":"MT1 Quick Start Guide","type":"2","cover":"","cover_alt":"","desc":null,"website":"","contact":"","seo_title":"Quick start guide","seo_keyword":"","seo_desc":"","share_switch":"0","share_code":"","author":"\u9093\u4f73\u7389","published_time":"1726113170","add_time":"1726112824","update_time":"1778058362","corp_auth_id":"0","verify_code_auth_id":"0","editor_type":"3","file_type":"","auth_id":"[\"-1\"]","content":{"content_id":"162856","content":"
1. Instructions for Buttons<\/h2>\n
1.1 Power On<\/h3>\n
Press and hold the power button for approximately 3 seconds, and the bottom LED light strip will appear in blue.<\/p>\n
1.2 Power Off<\/h3>\n
Press and hold the power button for approximately 10 seconds till the screen goes off, indicating that the robot is successfully powered off.<\/p>\n
1.3 Pause<\/h3>\n
Tap on the screen to pause the working robot. Tap again to resume operation.<\/p>\n
1.4 Emergency Stop<\/h3>\n
In case of an emergency, press the emergency stop switch to stop a working robot. Rotate the emergency stop switch clockwise, and resume the operation according to the screen tips.<\/p>\n
Caution: Before starting an automatic cleaning task, make sure the robot is powered on and placed below or in front of the visual marker (depending on the position of the marker) for successful positioning at the startup location.<\/strong><\/p>\n
2. Instructions for Handle<\/h2>\n
When you need to push the robot, raise the handle. When the robot is idle or working automatically, lower the handle.<\/p>\n
When you need to interact with the screen, there are two options: you can either open the screen protector and directly interact with the screen, or detach the screen from the robot and operate it either by holding it in your hands or by attaching it to the handle.<\/p>\n
<\/p>\n
* The robot handle and the screen are designed to be detachable.<\/span><\/p>","pure_content":"1. Instructions for Buttons\n1.1 Power On\nPress and hold the power button for approximately 3 seconds, and the bottom LED light strip will appear in blue.\n1.2 Power Off\nPress and hold the power button for approximately 10 seconds till the screen goes off, indicating that the robot is successfully powered off.\n1.3 Pause\nTap on the screen to pause the working robot. Tap again to resume operation.\n1.4 Emergency Stop\nIn case of an emergency, press the emergency stop switch to stop a working robot. Rotate the emergency stop switch clockwise, and resume the operation according to the screen tips.\nCaution: Before starting an automatic cleaning task, make sure the robot is powered on and placed below or in front of the visual marker (depending on the position of the marker) for successful positioning at the startup location.\n2. Instructions for Handle\nWhen you need to push the robot, raise the handle. When the robot is idle or working automatically, lower the handle.\nWhen you need to interact with the screen, there are two options: you can either open the screen protector and directly interact with the screen, or detach the screen from the robot and operate it either by holding it in your hands or by attaching it to the handle.\n\n* The robot handle and the screen are designed to be detachable.","is_draft":"0","editor_type":"3","file_path":"","add_time":"1726112824","update_time":"1778058362"},"pure_content":"1. Instructions for Buttons\n1.1 Power On\nPress and hold the power button for approximately 3 seconds, and the bottom LED light strip will appear in blue.\n1.2 Power Off\nPress and hold the power button"},{"id":"162859","string_id":"5UWoDxQn","status":"1","parent_id":"783527","slug":"bao-yang-zhi-nan-ld8K","order":"1","name":"MT1 Maintenance Tips","type":"2","cover":"","cover_alt":"","desc":null,"website":"","contact":"","seo_title":"Maintenance","seo_keyword":"","seo_desc":"","share_switch":"0","share_code":"","author":"\u9093\u4f73\u7389","published_time":"1726113802","add_time":"1726113572","update_time":"1778058362","corp_auth_id":"0","verify_code_auth_id":"0","editor_type":"3","file_type":"","auth_id":"[\"-1\"]","content":{"content_id":"162859","content":"
1. Maintenance and Care<\/h2>\n
\n
Start failure: Check the battery level. Charge the battery if it is exhausted.<\/li>\n
Unable to clean garbage:
a. The dustbin is full. Remove the dustbin and clean it up before restarting the robot.
b. Check the brush. If it is severely worn, replace it with a new brush assembly.<\/li>\n<\/ol>\n
1.1 Maintenance Components<\/h3>\n<\/colgroup>\n\n\n\n\n\n\n
Components<\/strong><\/td>\n Inspection Interval<\/strong><\/td>\n Maintenance Method<\/strong><\/td>\n<\/tr>\n
Drive wheels, and auxiliary wheels<\/td>\n Weekly<\/td>\n Wipe the surface with a clean cloth.<\/td>\n<\/tr>\n
Vision sensors and Lidar<\/td>\n Weekly<\/td>\n Use a soft, dry cloth or lens cleanser for cleaning<\/td>\n<\/tr>\n
Dustbin<\/td>\n Half a month<\/td>\n Clean up any garbage left inside the dustbin. If necessary, wash it with clean water, and then dry it before putting it back.<\/td>\n<\/tr>\n
Air Filter<\/td>\n Half a month<\/td>\n Repeatedly pull the dust removal handle on the side of the robot body<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
2. MT1 Routine Maintenance<\/h2>\n

2\u3001Safety Instructions<\/h1>\n

3\u3001Product Components<\/h1>\n

3.1 Packing List<\/h2>\nMain unit x 1, Charger x 1, Sweeping side brush x 2, Sweeping roller brush x 1, \"PUDU MT1 User Manual\" x 1, Certificate of Conformity x 1, Positioning code x 1, Warning flagpole x 1.<\/p>\n

4\u3001Product Usage<\/h1>\n

4.1 Power On, Power Off, Pause, Start<\/h2>\n

4.1.2 Pause<\/h3>\nDuring the robot's Auto-Cleaning operation, touch to wake up the screen, and tap the Pause button to stop the robot.<\/p>\n<\/p>\n

4.1.3 Start<\/h3>\nIf you need to continue running, tap the Start button on the screen, and the robot will resume the task.<\/p>\n<\/p>\n

4.3 Work Modes<\/h2>\n

4.3.1 Manual Cleaning<\/h3>\nAfter clicking \"Manual Cleaning\" on the homepage, adjust the desired cleaning gear, click \"Start Cleaning\", and you can push the robot to perform the cleaning task.<\/p>\n<\/p>\n<\/p>\n

4.3.3 Scheduled Task Settings<\/h3>\nThe robot supports scheduled task settings. Once configured, the robot will automatically execute tasks at the set time, provided that positioning is normal and the battery level is sufficient.<\/p>\n<\/p>\n<\/p>\n

4.9 Common Functions<\/h2>\n

4.9.2 Product Interaction Settings<\/h5>\n01 Multi-language Switching<\/p>\nSwitch the language of the operating system<\/p>\n<\/p>\n02 Metric and Imperial Unit Switching<\/p>\nWhen enabled, imperial units will be displayed<\/p>\n<\/p>\n03 Play voice and music during operation<\/p>\n<\/p>\n

5\u3001Product Maintenance & Troubleshooting<\/h1>\n

5.1 Daily Cleaning<\/h2>\n

1. Overview<\/h2>\n

1. Instructions for Buttons<\/h2>\n

1.1 Power On<\/h3>\nPress and hold the power button for approximately 3 seconds, and the bottom LED light strip will appear in blue.<\/p>\n

1.2 Power Off<\/h3>\nPress and hold the power button for approximately 10 seconds till the screen goes off, indicating that the robot is successfully powered off.<\/p>\n

1.3 Pause<\/h3>\nTap on the screen to pause the working robot. Tap again to resume operation.<\/p>\n

3.1 Packing List<\/h2>\n
Main unit x 1, Charger x 1, Sweeping side brush x 2, Sweeping roller brush x 1, \"PUDU MT1 User Manual\" x 1, Certificate of Conformity x 1, Positioning code x 1, Warning flagpole x 1.<\/p>\n

4.1.2 Pause<\/h3>\n
During the robot's Auto-Cleaning operation, touch to wake up the screen, and tap the Pause button to stop the robot.<\/p>\n
$\"descript\"$ <\/p>\n

4.1.3 Start<\/h3>\n
If you need to continue running, tap the Start button on the screen, and the robot will resume the task.<\/p>\n
$\"descript\"$ <\/p>\n

4.3.1 Manual Cleaning<\/h3>\n
After clicking \"Manual Cleaning\" on the homepage, adjust the desired cleaning gear, click \"Start Cleaning\", and you can push the robot to perform the cleaning task.<\/p>\n
$\"descript\"$ <\/p>\n
$\"descript\"$ <\/p>\n

1.1 Power On<\/h3>\n
Press and hold the power button for approximately 3 seconds, and the bottom LED light strip will appear in blue.<\/p>\n

1.2 Power Off<\/h3>\n
Press and hold the power button for approximately 10 seconds till the screen goes off, indicating that the robot is successfully powered off.<\/p>\n

1.3 Pause<\/h3>\n
Tap on the screen to pause the working robot. Tap again to resume operation.<\/p>\n