1. Maintenance and cleaning method of Kettybot shell and tray
- Cleaning tools: Use a soft and clean cloth to wipe
- Frequency : 4~5 times a week
- Cleanser type: Household cleaning agents, laundry detergents, clean water.
Notice:
-
Don’t use detergents containing gasoline, banana oil, etc. In case it might hurt skin or Kettybot surface.
-
Avoid the Kettybot from touching ink and sulfide, do not mix different detergents.
2. Screen and sensor maintenance
- Cleaning tools: Use soft tissue or other lens cleaning tools to clean.
- Cleaning frequency: 2 ~ 4 times a week.
- Cleanser type: Household cleaning agents, laundry detergents, degreasers, and clean water.
Notice:
- Don’t use detergents containing gasoline, banana oil, strong acid, etc.
- Avoid cleaning agents or other liquids infiltration into the sensor.
3. Battery&robot storage and maintenance
- Humidity: Do not operate and store in a high humidity environment.
- Operating temperature: Do not use it at high or low temperatures for a long time.
- Operating environment: Indoor, flat and smooth floor, no strong sunlight.
- Charging frequency: Charge in time when battery is low.
4. Charging pile maintenance
Installation requirements: On a flat, dry floor with the back against a wall.
Notice:
- No flammable items around charging pile.
- Keep a clear space in front and on both sides when charging pile working.
- No reflective or transparent items in the charging pile position.
5. Wheels maintenance
Clean method: Use a damp cloth or brush to scrub the motor and the auxiliary wheels, use detergent if there is oil.
Frequency: 1 ~ 2 times a week.
Notice:
- If wheels are tangled by hair or other stuff, put down the robot first then clean.
- Please replace with new wheels when the wheels are worn badly.
6. Body and internal maintenance
Cleaning method: Use a damp cloth wipe the body, soft-bristled brush or hair dryer clean the hair entangled inside.
Frequency: 0 ~ 2 times a week.
Routine maintenance:
- Handle the robot gently, do not hit or break the robot.
- Don’t pile up waste around the robot to avoid insects or other animals getting into the robot.