1. All SwiftBot has compartment?
two types , one has compartment , the other has not.
2. Can the Swiftbot also be charged when the key is on the OFF position ?
Yes
3. How long is the charging time?
4.5 H
4. What is the maximum height of passing over obstacles and the width of passing the gap?
maximum height of passing over obstacles is 7 mm (0.28 in)
the width of passing the gap is: 35 mm (1.38 in)
5. What are the current functional modes of Swiftbot?
There are currently 6 functional modes in total, food delivery, Guiding, interaction, delivery, cruise, and birthday.
6. In which scenarios can the projection function will be triggered ?
Go straight, turn left/right, open the door with foot, robot positioning lost, win a lottery, birthday, no network connection, abnormality, etc.
7. Does Swiftbot support pass gates via Bluetooth ?
Yes
Not supported at the moment
10. Does Swiftbot support taking elevators?
Yes
11. Can Swiftbot modify the expression while it’s in sleep mode?
No
Main interface->food delivery interface->⚙ pattern on the right ->order of delivery
13. How to check the fault reported by the robot on the cloud platform?
Enter the cloud platform, select the [Log Center ->Robot Logs and input the robot's mac address to query.
14. What prerequisites need to be met for the installation tool to be able to connect to the robot IP normally?
(1) The robot and PC must be in the same network (connected to the same network)
(2) The debugging switch on the robot must be turned on
When the floor height is 2.5-4m (8.20–13.12 ft), the distance of markers should be 1.2m (3.94 ft);
When the floor height is 4-5m (13.12–16.40 ft), the distance of markers should be 1.5m (4.92 ft);
When the floor height is 5-5.5m (16.40–18.04 ft), the distance of markers should be 2m (6.56 ft);
When the floor height is 6.5-8m (21.33–26.25 ft), the distance of markers should be 2.5m (8.20 ft).
In the free mode, all docking points are pick up points and there are no temporary parking points. In the waiting mode, there are pick up points and temporary stopping points; these points are based on priority,In the installation tool element list, the pick up points that raking first in the same group have higher priority, and the robot will first return those points with higher priority;
When the path is wide enough, it is recommended that each dining table set an arrival point. If some tables cannot set an arrival point due to insufficient path width, the arrival point needs to be set at the nearest location.
(1) The first and last nodes of the cruise path must be consistent;
(2) Nodes must be added in sequence according to the cruise path node order;
(3) Each node in the path is separated by commas.
19. What should you pay attention to when adding a new arrival point near a two-way route?
(1) The dining table cannot be set in the middle of the double-row path, but needs to be set on the edge of the double-row path after sampling;
(2) Try to keep the dining table outside the node range.
Select the route in the installer(pc), and set the speed limit on the property bar.