{"data":{"id":"783551","string_id":"0ceHm1wF","status":"1","parent_id":"103219","slug":"0ceHm1wF","order":"9","name":"CC1","type":"1","cover":"","cover_alt":"","desc":null,"website":"","contact":"","seo_title":"","seo_keyword":"","seo_desc":"","author":"Zoe LEE","published_time":"0","add_time":"1778059241","update_time":"1778059256","corp_auth_id":"0","verify_code_auth_id":"0","editor_type":"1","tags":[],"parent_name":"Product Guide","parent_type":"1","parent_slug":"rLWDgM","child":[{"id":"107960","string_id":"5KQjl3","status":"1","parent_id":"783551","slug":"chan-pin-jian-jie-url0","order":"4","name":"CC1 Product introduction","type":"2","cover":"","cover_alt":"","desc":null,"website":"","contact":"","seo_title":"Product introduction","seo_keyword":"","seo_desc":"","share_switch":"0","share_code":"","author":"\u9093\u4f73\u7389","published_time":"1719312077","add_time":"1718090466","update_time":"1778059256","corp_auth_id":"0","verify_code_auth_id":"0","editor_type":"3","file_type":"","auth_id":"[\"-1\"]","content":{"content_id":"107960","content":"

1. Overview<\/h2>\n

<\/h2>\n
<\/p>\n
The PUDU CC1 robot is a versatile cleaning robot designed for small and medium-sized scenarios. It integrates sweeping, scrubbing, (carpet) vacuuming, and dust mopping and features auto-filling\/draining and auto-charging functions.
It is suitable to various cleaning scenarios with different materials and hardness, whether hard floors or low pile carpet. Its typical application scenarios include office buildings, departments, hotels, retail store and other indoor scenarios that require a light cleaning. The product improves the overall cleanliness of the environment at lower costs and higher efficiency.<\/p>\n

2. Appearance and components<\/h2>\n
<\/p>\n
<\/colgroup>\n\n\n\n\n\n\n\n\n\n\n
No.<\/strong><\/td>\n Description<\/strong><\/td>\n No.<\/strong><\/td>\n Description<\/strong><\/td>\n No.<\/strong><\/td>\n Description<\/strong><\/td>\n<\/tr>\n
1<\/td>\n Emergency stop switch<\/td>\n 9<\/td>\n Charging electrode plate<\/td>\n 17<\/td>\n Top-view camera<\/td>\n<\/tr>\n
2<\/td>\n LCD screen<\/td>\n 10<\/td>\n Drain outlet<\/td>\n 18<\/td>\n Battery cover<\/td>\n<\/tr>\n
3<\/td>\n RGBD<\/td>\n 11<\/td>\n On\/Off switch<\/td>\n 19<\/td>\n Mopping-vacuuming part<\/td>\n<\/tr>\n
4<\/td>\n Ultrasonic radar<\/td>\n 12<\/td>\n Universal wheel<\/td>\n 20<\/td>\n Squeegee<\/td>\n<\/tr>\n
5<\/td>\n Lidar<\/td>\n 13<\/td>\n Drive wheel<\/td>\n 21<\/td>\n Key switch<\/td>\n<\/tr>\n
6<\/td>\n Solid-state Lidar<\/td>\n 14<\/td>\n Recovery tank cover<\/td>\n 22<\/td>\n Main brush 1 (for scrubbing)<\/td>\n<\/tr>\n
7<\/td>\n Water inlet<\/td>\n 15<\/td>\n Handle<\/td>\n 23<\/td>\n Main brush 2 (for sweeping)<\/td>\n<\/tr>\n
8<\/td>\n RGB camera<\/td>\n 16<\/td>\n Charging port<\/td>\n 24<\/td>\n Side brush<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
Cleaning components on the back:<\/strong><\/p>\n
<\/strong><\/p>\n
3. Performance parameters and specifications<\/h2>\n<\/colgroup>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Feature<\/strong><\/td>\n Description<\/strong><\/td>\n<\/tr>\n
Model<\/td>\n CCBC01<\/td>\n<\/tr>\n
Operating voltage<\/td>\n DC 23 V–29.2 V<\/td>\n<\/tr>\n
Power input<\/td>\n AC 100 V–240 V, 50\/60 Hz<\/td>\n<\/tr>\n
Power output<\/td>\n 29.2 V\uff0c15 A<\/td>\n<\/tr>\n
Battery capacity<\/td>\n 50 Ah<\/td>\n<\/tr>\n
Charging time<\/td>\n < 3 h<\/td>\n<\/tr>\n
Battery life<\/td>\n 3 h–8 h<\/td>\n<\/tr>\n
Cleaning capabilities<\/td>\n Scrubbing: 5 h; Sweeping+Vacuuming+Mopping: 5 h<\/td>\n<\/tr>\n
Carpet vacuuming: 4 h\uff1bSilent mopping: 9 h<\/td>\n<\/tr>\n
Weight<\/td>\n 75 kg (165.35 pounds)<\/td>\n<\/tr>\n
Screen size<\/td>\n 10.1-inch LCDscreen<\/td>\n<\/tr>\n
Robot dimensions
(L×W×H)<\/td>\n 62.955.269.5 cm (24.7621.7327.36 inches)<\/td>\n<\/tr>\n
Enclosure material<\/td>\n PC+ABS<\/td>\n<\/tr>\n
Navigation method<\/td>\n Integrated lidar and visual SLAM positioning<\/td>\n<\/tr>\n
Cruise speed<\/td>\n 0.2–1.2 m\/s (0.66–3.94 ft\/s)<\/td>\n<\/tr>\n
Working noise<\/td>\n < 70 dB<\/td>\n<\/tr>\n
Max. climbing angle<\/td>\n 8º<\/td>\n<\/tr>\n
Min. Path Clearance<\/td>\n 70 cm (27.56 inches)<\/td>\n<\/tr>\n
Min. turning width<\/td>\n 88 cm (34.65 inches)<\/td>\n<\/tr>\n
Min. Passing Height Limit<\/td>\n 76 cm (29.92 inches)<\/td>\n<\/tr>\n
Max. surmountable height<\/td>\n 20 mm (0.79 inch)<\/td>\n<\/tr>\n
Max. surmountable gap<\/td>\n 35 mm (1.38 inches)<\/td>\n<\/tr>\n
Cleaning width (with side brush)<\/td>\n 50 cm (19.69 inches) (MAX)<\/td>\n<\/tr>\n
Squeggee\/Mopping-vacuuming part cleaning width<\/td>\n 63 cm (24.80 inches)<\/td>\n<\/tr>\n
Vacuum cleaner nozzle (for short-haired carpet)<\/td>\n 51.5 cm (20.27 inches)<\/td>\n<\/tr>\n
Cleaning efficiency<\/td>\n 700–1000 \u33a1\/h (7534.74–10763.92 ft²\/h)<\/td>\n<\/tr>\n
Dustbin capacity<\/td>\n 2.5 L<\/td>\n<\/tr>\n
Water tank capacity<\/td>\n Solution tank: 15 L<\/td>\n<\/tr>\n
Recovery tank:15 L<\/td>\n<\/tr>\n
Operation system<\/td>\n Android<\/td>\n<\/tr>\n
Communication<\/td>\n 4G, WIFI, Bluetooth supported, Lora (Optional)<\/td>\n<\/tr>\n
Mobile App<\/td>\n Supported<\/td>\n<\/tr>\n
Operation mode<\/td>\n Manual\/Auto<\/td>\n<\/tr>\n
Auto charging &Auto adding \/draining water<\/td>\n Supported (inconjunction with docking station)<\/td>\n<\/tr>\n
Optional function<\/td>\n Docking station\/Charing station<\/td>\n<\/tr>\n
Working environment<\/td>\n Temperature: 1\u2103 to 40\u2103 (33.8\u2109 to 104\u2109); RH:≤ 85%<\/td>\n<\/tr>\n
Storage environment<\/td>\n Temperature: -20\u2103 to 60\u2103 (-4\u2109 to 140\u2109); RH: ≤ 85%<\/td>\n<\/tr>\n
Working altitude<\/td>\n \uff1c 2000 m (6561.68 ft)<\/td>\n<\/tr>\n
Application scope<\/td>\n Terrazzo, marble, tiles, epoxy resin, sandstone, artificial stone, short-pile carpets, etc.<\/td>\n<\/tr>\n
IP rating<\/td>\n IPX4<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
* The battery life of each cleaning mode is calculated based on the low gear setting, with the battery starting at 100% and ending at 10%.<\/p>","pure_content":"1. Overview\n\n\nThe PUDU CC1 robot is a versatile cleaning robot designed for small and medium-sized scenarios. It integrates sweeping, scrubbing, (carpet) vacuuming, and dust mopping and features auto-filling\/draining and auto-charging functions.It is suitable to various cleaning scenarios with different materials and hardness, whether hard floors or low pile carpet. Its typical application scenarios include office buildings, departments, hotels, retail store and other indoor scenarios that require a light cleaning. The product improves the overall cleanliness of the environment at lower costs and higher efficiency.\n2. Appearance and components\n\n\n\n\n No.\n Description\n No.\n Description\n No.\n Description\n\n\n 1\n Emergency stop switch\n 9\n Charging electrode plate\n 17\n Top-view camera\n\n\n 2\n LCD screen\n 10\n Drain outlet\n 18\n Battery cover\n\n\n 3\n RGBD\n 11\n On\/Off switch\n 19\n Mopping-vacuuming part\n\n\n 4\n Ultrasonic radar\n 12\n Universal wheel\n 20\n Squeegee\n\n\n 5\n Lidar\n 13\n Drive wheel\n 21\n Key switch\n\n\n 6\n Solid-state Lidar\n 14\n Recovery tank cover\n 22\n Main brush 1 (for scrubbing)\n\n\n 7\n Water inlet\n 15\n Handle\n 23\n Main brush 2 (for sweeping)\n\n\n 8\n RGB camera\n 16\n Charging port\n 24\n Side brush\n\n\n\nCleaning components on the back:\n\u00a0 \n3. Performance parameters and specifications\n\n\n\n Feature\n Description\n\n\n Model\n CCBC01\n\n\n Operating voltage\n DC 23 V\u201329.2 V\n\n\n Power input\n AC 100 V\u2013240 V, 50\/60 Hz\n\n\n Power output\n 29.2 V\uff0c15 A\n\n\n Battery capacity\n 50 Ah\n\n\n Charging time\n < 3 h\n\n\n Battery life\n 3 h\u20138 h\n\n\n Cleaning capabilities\n Scrubbing: 5 h; Sweeping+Vacuuming+Mopping: 5 h\n\n\n Carpet vacuuming: 4 h\uff1bSilent mopping: 9 h\n\n\n Weight\n 75 kg (165.35 pounds)\n\n\n Screen size\n 10.1-inch LCDscreen\n\n\n Robot dimensions(L\u00d7W\u00d7H)\n 62.955.269.5 cm (24.7621.7327.36 inches)\n\n\n Enclosure material\n PC+ABS\n\n\n Navigation method\n Integrated lidar and visual SLAM positioning\n\n\n Cruise speed\n 0.2\u20131.2 m\/s (0.66\u20133.94 ft\/s)\n\n\n Working noise\n < 70 dB\n\n\n Max. climbing angle\n 8\u00ba\n\n\n Min. Path Clearance\n 70 cm (27.56 inches)\n\n\n Min. turning width\n 88 cm (34.65 inches)\n\n\n Min. Passing Height Limit\n 76 cm (29.92 inches)\n\n\n Max. surmountable height\n 20 mm (0.79 inch)\n\n\n Max. surmountable gap\n 35 mm (1.38 inches)\n\n\n Cleaning width (with side brush)\n 50 cm (19.69 inches) (MAX)\n\n\n Squeggee\/Mopping-vacuuming part cleaning width\n 63 cm (24.80 inches)\n\n\n Vacuum cleaner nozzle (for short-haired carpet)\n 51.5 cm (20.27 inches)\n\n\n Cleaning efficiency\n 700\u20131000 \u33a1\/h (7534.74\u201310763.92 ft\u00b2\/h)\n\n\n Dustbin capacity\n 2.5 L\n\n\n Water tank capacity\n Solution tank: 15 L\n\n\n Recovery tank:15 L\n\n\n Operation system\n Android\n\n\n Communication\n 4G, WIFI, Bluetooth supported, Lora (Optional)\n\n\n Mobile App\n Supported\n\n\n Operation mode\n Manual\/Auto\n\n\n Auto charging &Auto adding \/draining water\n Supported (inconjunction with docking station)\n\n\n Optional function\n Docking station\/Charing station\n\n\n Working environment\n Temperature: 1\u2103 to 40\u2103 (33.8\u2109 to 104\u2109); RH:\u2264 85%\n\n\n Storage environment\n Temperature: -20\u2103 to 60\u2103 (-4\u2109 to 140\u2109); RH: \u2264 85%\n\n\n Working altitude\n \uff1c 2000 m (6561.68 ft)\n\n\n Application scope\n Terrazzo, marble, tiles, epoxy resin, sandstone, artificial stone, short-pile carpets, etc.\n\n\n IP rating\n IPX4\n\n\n\n* The battery life of each cleaning mode is calculated based on the low gear setting, with the battery starting at 100% and ending at 10%.","is_draft":"0","editor_type":"3","file_path":"","add_time":"1718090466","update_time":"1778059256"},"pure_content":"1. Overview\n\n\nThe PUDU CC1 robot is a versatile cleaning robot designed for small and medium-sized scenarios. It integrates sweeping, scrubbing, (carpet) vacuuming, and dust mopping and features auto-"},{"id":"113446","string_id":"YxOrfB","status":"1","parent_id":"783551","slug":"kuai-su-shi-yong-7FOV","order":"3","name":"CC1 Quick Start Guide","type":"2","cover":"","cover_alt":"","desc":null,"website":"","contact":"","seo_title":"Quick start guide","seo_keyword":"","seo_desc":"","share_switch":"0","share_code":"","author":"\u9093\u4f73\u7389","published_time":"1719381322","add_time":"1718941471","update_time":"1778059256","corp_auth_id":"0","verify_code_auth_id":"0","editor_type":"3","file_type":"","auth_id":"[\"-1\"]","content":{"content_id":"113446","content":"
\n
Contents<\/h2>\n
\n
1. Instructions for Buttons<\/a>\n
\n
1.1 Powering On\/Off <\/a>\n
\n
1.1.1 Powering on<\/a><\/li>\n
1.1.2 Powering off<\/a><\/li>\n<\/ul>\n<\/li>\n
1.2 Pause<\/a><\/li>\n
1.3 Emergency stop<\/a><\/li>\n<\/ul>\n<\/li>\n
2. Instructions for Handle<\/a><\/li>\n
3. Cleaning Mode<\/a><\/li>\n
4. Working Modes<\/a>\n
\n
4.1 Manual Cleaning<\/a><\/li>\n
4.2 Automatic Cleaning<\/a><\/li>\n
4.3 Scheduled Task Setting<\/a><\/li>\n<\/ul>\n<\/li>\n<\/ul>\n<\/div>\n
1. Instructions for Buttons<\/h2>\n
_{1.1 <\/span>Powering On\/Off<\/sub> <\/h3>\n1.1.1 Powering on<\/h4>\nAfter confirming that the key switch is turned on, press and hold the power button for about 3 seconds, and the bottom light strip will appear in blue.<\/p>\n
<\/p>\n
1.1.2 Powering off<\/h4>\nPress and hold the power button for 6 seconds till the screen goes off, indicating that the robot is successfully powered off.<\/p>\n
1.2 Pause<\/strong><\/h3>\nTap on the screen to pause the working robot. Tap again to resume operation.<\/p>\n
1.3 Emergency stop<\/strong><\/h3>\nIn case of an emergency, press the emergency stop switch to stop a working robot. Rotate the emergency stop switch clockwise, and resume the operation according to the screen tips.<\/p>\n
<\/colgroup>\n\n\n\nCaution\uff1a<\/strong><\/td>\n<\/tr>\n
Before starting an automatic cleaning task, make sure the robot is powered on and placed below or in front of the visual marker (depending on the position of the marker) for successful positioning at the startup location.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/p>\n
2. Instructions for Handle<\/strong><\/h2>\nThe robot handle connected to the screen is either raised or lowered.<\/p>\n
When you need to push the robot or interact with the screen, raise the handle and screen;<\/p>\n
When the robot is idle or working automatically, lower the handle and screen.<\/p>\n
<\/colgroup>\n\n\n\nHandle raised<\/strong><\/td>\n Handle lowered<\/strong><\/td>\n<\/tr>\n
<\/td>\n <\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n3. Cleaning Mode<\/h2>\nThe robot comes with various modes to cater to different scenarios, including Sweeping, (Carpet) Vacuuming, Dust Mopping, and Scrubbing.<\/p>\n
\n\n\n\n\n\n\n\nCleaning Mode<\/strong><\/td>\n Description<\/strong><\/td>\n<\/tr>\n<\/thead>\n
Scrubbing Mode<\/td>\n \nIn Scrubbing Mode, scrubbing operation will be performed, which is suitable for hard floor cleaning.<\/p>\n
Remove the side brush. Install the washing brush and the squeegee. Make sure the washing filter is installed in the recovery tank.<\/p>\n<\/td>\n<\/tr>\n
Sweeping Mode<\/td>\n \nIn the standard Sweeping Mode, the robot will perform \"sweeping+vacuumming+dust mopping\" cleaning operation, which is suitable for hard floors cleaning.<\/p>\n
Install the side brush, sweeping brush, and Mopping-vacuuming part. Make sure the vacuum dustbin is installed in the recovery tank, and the dirty water recovery tank.<\/p>\n<\/td>\n<\/tr>\n
Carpet Vacuuming Mode<\/td>\n \nIn the Carpet Vacuuming Mode, the robot will perform \"sweeping+vacuumming\" cleaning operation, which is suitable for low-pile carpet cleaning.<\/p>\n
Install the side brush, sweeping brush, and carpet sweeper. Make sure the vacuum dustbin is installed in the recovery tank, and the recovery tank is empty.<\/p>\n<\/td>\n<\/tr>\n
Silent Mopping Mode<\/td>\n \nIn the Silent Mopping Mode, the blower is turned off. It is suitable for sound-sensitive cleaning environments.<\/p>\n
Install the side brush, sweeping brush, and mop head.<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
Refer to PUDU CC1 Operation Guide<\/a> for more information on how to use the robot.<\/p>\n
4. Working Modes<\/h2>\n4.1 Manual Cleaning<\/h3>\nOn the home page, click on \"Manual Cleaning\", then select the cleaning mode (mopping or sweeping). After clicking on \"Start\", you can push the robot to perform the cleaning task (Note: when performing manual cleaning, remember to raise the handle and push the robot for cleaning).<\/p>\n
<\/p>\n
<\/p>\n
<\/p>\n
4.2 Automatic Cleaning<\/h3>\nBefore starting an automatic cleaning task, please ensure that the robot is powered on and positioned directly below or in front of the visual marker code (depending on the placement of the marker code). This will ensure that the robot can successfully locate itself at the starting point.<\/p>\n
<\/p>\n
After clicking on \"Auto-Cleaning\" on the home page, select the desired cleaning task (previously set by the delivery personnel). If no selection is made, the default task will be executed. Click on \"Start \" to start the task. The robot will begin executing the selected task. (Please note that, in automatic cleaning mode, it is necessary to put down the handle of the screen. Failure to do so may prevent the task from starting properly.)<\/p>\n
<\/p>\n
<\/p>\n4.3 Scheduled Task Setting<\/h3>\nThe robot supports scheduled task setting. After setting up a scheduled task, the robot will automatically execute the task at the designated time, provided that it is properly positioned, has sufficient battery power, and an adequate water level.<\/p>\n
<\/p>\n
<\/p>\n
<\/p>","pure_content":"Contents\n\n1. Instructions for Buttons\n\n1.1 Powering On\/Off\u00a0\n\n1.1.1 Powering on\n1.1.2 Powering off\n\n\n1.2 Pause\n1.3 Emergency stop\n\n\n2. Instructions for Handle\n3. Cleaning Mode\n4. Working Modes\n\n4.1 Manual Cleaning\n4.2 Automatic Cleaning\n4.3 Scheduled Task Setting\n\n\n\n\n1. Instructions for Buttons\n1.1 Powering On\/Off\u00a0\n1.1.1 Powering on\nAfter confirming that the key switch \u00a0 is turned on, press and hold the power button for about 3 seconds, and the bottom light strip will appear in blue.\n\n1.1.2 Powering off\nPress and hold the power button for 6 seconds till the screen goes off, indicating that the robot is successfully powered off.\n1.2 Pause\nTap on the screen to pause the working robot. Tap again to resume operation.\n1.3 Emergency stop\nIn case of an emergency, press the emergency stop switch to stop a working robot. Rotate the emergency stop switch clockwise, and resume the operation according to the screen tips.\n\n\n\n Caution\uff1a\n\n\n Before starting an automatic cleaning task, make sure the robot is powered on and placed below or in front of the visual marker (depending on the position of the marker) for successful positioning at the startup location.\n\n\n\n\n2. Instructions for Handle\nThe robot handle connected to the screen is either raised or lowered.\nWhen you need to push the robot or interact with the screen, raise the handle and screen;\nWhen the robot is idle or working automatically, lower the handle and screen.\n\n\n\n Handle raised\n \u00a0Handle lowered\n\n\n \n \n\n\n\n3. Cleaning Mode\nThe robot comes with various modes to cater to different scenarios, including Sweeping, (Carpet) Vacuuming, Dust Mopping, \u00a0and Scrubbing.\n\n\n\n Cleaning Mode\n Description\n\n\n\n\n Scrubbing Mode\n In Scrubbing Mode, scrubbing operation will be performed, which is suitable for hard floor cleaning.\nRemove the side brush. Install the washing brush and the squeegee. Make sure the washing filter is installed in the recovery tank.\n\n\n Sweeping Mode\n In the standard Sweeping Mode, the robot will perform \"sweeping+vacuumming+dust mopping\" cleaning operation, which is suitable for hard floors cleaning.\nInstall the side brush, sweeping brush, and Mopping-vacuuming part. Make sure the vacuum dustbin is installed in the recovery tank, and the dirty water recovery tank.\n\n\n Carpet Vacuuming Mode\n In the Carpet Vacuuming Mode, the robot will perform \"sweeping+vacuumming\" cleaning operation, which is suitable for low-pile carpet cleaning.\nInstall the side brush, sweeping brush, and carpet sweeper. Make sure the vacuum dustbin is installed in the recovery tank, and the recovery tank is empty.\n\n\n Silent Mopping Mode\n In the Silent Mopping Mode, the blower is turned off. It is suitable for sound-sensitive cleaning environments.\nInstall the side brush, sweeping brush, and mop head.\n\n\n\nRefer to PUDU CC1 Operation Guide for more information on how to use the robot.\n4. Working Modes\n4.1 Manual Cleaning\nOn the home page, click on \"Manual Cleaning\", then select the cleaning mode (mopping or sweeping). After clicking on \"Start\", you can push the robot to perform the cleaning task (Note: when performing manual cleaning, remember to raise the handle and push the robot for cleaning).\n\n\n\n4.2 Automatic Cleaning\nBefore starting an automatic cleaning task, please ensure that the robot is powered on and positioned directly below or in front of the visual marker code (depending on the placement of the marker code). This will ensure that the robot can successfully locate itself at the starting point.\n\nAfter clicking on \"Auto-Cleaning\" on the home page, select the desired cleaning task (previously set by the delivery personnel). If no selection is made, the default task will be executed. Click on \"Start \" to start the task. The robot will begin executing the selected task. (Please note that, in automatic cleaning mode, it is necessary to put down the handle of the screen. Failure to do so may prevent the task from starting properly.)\n\n\n4.3 Scheduled Task Setting\nThe robot supports scheduled task setting. After setting up a scheduled task, the robot will automatically execute the task at the designated time, provided that it is properly positioned, has sufficient battery power, and an adequate water level.","is_draft":"0","editor_type":"3","file_path":"","add_time":"1718941471","update_time":"1778059256"},"pure_content":"Contents\n\n1. Instructions for Buttons\n\n1.1 Powering On\/Off\u00a0\n\n1.1.1 Powering on\n1.1.2 Powering off\n\n\n1.2 Pause\n1.3 Emergency stop\n\n\n2. Instructions for Handle\n3. Cleaning Mode\n4. Working Modes\n\n4.1 Ma"},{"id":"745346","string_id":"B3WuYdq5","status":"1","parent_id":"783551","slug":"PUDU-CC1-Operation-Guide-V6","order":"2","name":"CC1 Operation Guide V6.0","type":"2","cover":"","cover_alt":"","desc":null,"website":"","contact":"","seo_title":"","seo_keyword":"","seo_desc":"","share_switch":"0","share_code":"","author":"","published_time":"1778040329","add_time":"1773717844","update_time":"1778059257","corp_auth_id":"0","verify_code_auth_id":"0","editor_type":"3","file_type":"","auth_id":"[\"-1\"]","content":{"content_id":"745346","content":"
<\/p>\n
<\/p>\n
PUDU CC1 Operation Guide V6.0<\/p>\nPUDU_CC1_Operation_Guide_V6.0.pdf<\/a><\/p>\n
Document Version: V6.0<\/strong><\/p>\n
Model: CCBC01\/CCBC01N<\/strong><\/p>\n
Shenzhen Pudu Technology Co., Ltd.<\/strong><\/p>\n
Copyright © Shenzhen Pudu Technology Co., Ltd. 2026. All rights reserved.<\/p>\n
No part or all of the content of this operation manual may be reproduced, copied, transcribed, or translated in any form (electronic, photocopying, recording, etc.) for any purpose without the explicit written permission of Shenzhen Pudu Technology Co., Ltd., nor may it be disseminated for commercial purposes. The product specifications and information mentioned in this operation manual are for reference only; if the content is updated, no separate notice will be given. Unless otherwise specified, this operation manual serves only as a usage guide, and no statements herein constitute any form of warranty.<\/p>\n
Purpose<\/h1>\nThis manual introduces how to use and maintain the PUDU CC1. It is applicable to users, sales personnel, technical support engineers, and installation\/commissioning engineers.<\/p>\n
Revision History<\/h1>\n\n\n\n\n\n\n\n\nDate<\/td>\n Revision History<\/td>\n<\/tr>\n<\/thead>\n
2023\/10\/12<\/td>\n First Release<\/td>\n<\/tr>\n
2023\/11\/27<\/td>\n After-sales Policy Revision<\/td>\n<\/tr>\n
2024\/04\/10<\/td>\n Revision of Partial Specifications and Content<\/td>\n<\/tr>\n
2026\/03\/13<\/td>\n Content Update<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\nSymbol Convetions<\/h1>\nThe following symbols may appear in this manual, and their meanings are as follows.<\/p>\n
\n\n\n\n\n\n\n\n\nSymbol<\/p>\n<\/td>\n Description<\/td>\n<\/tr>\n<\/thead>\n
\nDanger<\/p>\n<\/td>\n Indicates a high potential hazard that, if not avoided, will result in death or serious injury.<\/td>\n<\/tr>\n
\nWarning<\/p>\n<\/td>\n Indicates a moderate or low potential hazard that, if not avoided, could result in minor injury to personnel, damage to the robot, etc.<\/td>\n<\/tr>\n
\nCaution<\/p>\n<\/td>\n Indicates a potential risk that, if these texts are ignored, could result in damage to the robot, data loss, or unpredictable results.<\/td>\n<\/tr>\n
\nNotes<\/p>\n<\/td>\n Indicates additional information to the main text, emphasizing and supplementing the main text.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/h2>\n
Contents<\/h1>\nPurpose 2<\/a><\/p>\n
Revision History 2<\/a><\/p>\n
Symbol Convetions 3<\/a><\/p>\n
Contents 4<\/a><\/p>\n
1\u3001Intended Use 7<\/a><\/p>\n
2\u3001Safety Instructions 8<\/a><\/p>\n
2.1 Power Supply Precautions 8<\/a><\/p>\n
2.2 Usage Precautions 8<\/a><\/p>\n
2.3 Environmental Precautions 9<\/a><\/p>\n
3\u3001Product Components 12<\/a><\/p>\n
3.1 Packing List 12<\/a><\/p>\n
3.2 Appearance and Parts 12<\/a><\/p>\n
3.3 Performance Parameters 14<\/a><\/p>\n
4\u3001Product Usage 15<\/a><\/p>\n
4.1 Basic Usage 15<\/a><\/p>\n
4.1.1 Power On, Power Off 15<\/a><\/p>\n
4.1.2 Start Cleaning Task 16<\/a><\/p>\n
4.1.3 Pause Cleaning Task 16<\/a><\/p>\n
4.1.4 Resume Cleaning Task 17<\/a><\/p>\n
4.2 Handrail Usage 17<\/a><\/p>\n
4.3 Work Modes 18<\/a><\/p>\n
4.3.1 Automatic Cleaning 18<\/a><\/p>\n
4.3.2 Scheduled Task 19<\/a><\/p>\n
4.3.3 Manual Cleaning 19<\/a><\/p>\n
4.4 Cleaning Modes 20<\/a><\/p>\n
4.4.1 Scrubbing Mode 20<\/a><\/p>\n
4.4.2 Sweeping Mode 22<\/a><\/p>\n
4.5 Robot Renew Water 24<\/a><\/p>\n
4.5.1 Manual Water Filling & Draining 24<\/a><\/p>\n
4.5.2 Auto Water Filling & Draining 25<\/a><\/p>\n
4.6 Robot Charging 26<\/a><\/p>\n
4.7 Device Status 28<\/a><\/p>\n
4.8 Settings 29<\/a><\/p>\n
4.9 Common Functions 30<\/a><\/p>\n
4.9.1 Cleaning Task Settings 30<\/a><\/p>\n
4.9.2 Product Maintenance Settings 33<\/a><\/p>\n
4.9.3 Product Interaction Settings 36<\/a><\/p>\n
5\u3001Product Maintenance & Troubleshooting 40<\/a><\/p>\n
5.1 Daily Cleaning 40<\/a><\/p>\n
5.1.1 Cleaning Sensors and the Underside of the Robot 40<\/a><\/p>\n
5.1.2 Cleaning Dust Bin, Water Filter Tank, Trash Container & Filter Sponge 40<\/a><\/p>\n
5.1.3 Cleaning Side Brush & Sweeping\/Scrubbing Roller Brushes 42<\/a><\/p>\n
5.1.4 Cleaning or Replacing Mop Cloth & Squeegee 43<\/a><\/p>\n
5.1.5 Cleaning the Dirty Water Tank 44<\/a><\/p>\n
5.1.6 Cleaning the Roller Brush Chamber 45<\/a><\/p>\n
5.1.7 Cleaning the Pollution Pipe 46<\/a><\/p>\n
5.1.8 Cleaning charging plates 46<\/a><\/p>\n
5.1.9 Clean the water tank filter 47<\/a><\/p>\n
5.2 Consumable Replacement 48<\/a><\/p>\n
5.3 Troubleshooting 49<\/a><\/p>\n
After-Sales Policy 50<\/a><\/p>\n
1\u3001Intended Use<\/h1>\n<\/p>\n
The PUDU CC1 cleaning robot is a multi-functional cleaning robot positioned for small and medium-sized scenarios. It integrates sweeping, scrubbing, (carpet) vacuuming, and dust mopping into one unit, supporting autonomous water refilling and drainage, autonomous charging, and autonomous maintenance. It is suitable for public areas such as office buildings, commercial buildings, and residential common areas. It can clean various floor types, including terrazzo, marble, floor tiles, epoxy resin, sandstone, artificial stone, and short-pile hard carpets.<\/p>\n
The product's core advantage lies in its ability to meet the diverse cleaning needs of various hard floors and short-pile hard carpets, allowing customers to use one machine for multiple purposes. Its primary target scenarios include light-soil indoor environments such as retail malls, office buildings, commercial buildings, and apartment hotels. While reducing costs and increasing efficiency for customers, it also enhances the overall cleanliness and quality of the environment.<\/p>\n
<\/h3>\n
2\u3001Safety Instructions<\/h2>\n
2.1 Power Supply Precautions<\/h3>\n\n\nIt is strictly forbidden to use non-original chargers to charge the robot. If the charger is found to be damaged, please replace it immediately.<\/p>\n<\/li>\n
\nFor the first use, please fully charge the battery to 100%.<\/p>\n<\/li>\n
\nTo ensure the efficiency and battery life of the robot, please keep the battery level above 10% at all times.<\/p>\n<\/li>\n
\nWhen the battery is below 10%, the robot is in a low battery state and needs to be charged as soon as possible.<\/p>\n<\/li>\n
\nWhen the battery is below 2%, it enters battery protection mode; the robot will not be able to perform tasks and must be charged before use.<\/p>\n<\/li>\n
\nIf the machine will not be used for a long period, please turn the power key switch to the \"OFF\" position.<\/p>\n<\/li>\n
\nIf the robot is to be used after being idle for a long time, please fully charge it before use.<\/p>\n<\/li>\n<\/ul>\n
2.2 Usage Precautions<\/h3>\n\n\nThis product is a wheeled autonomous cleaning robot and is limited to indoor flat environments; do not use it in outdoor environments (such as open balconies) or on rugged ground (such as stairs).<\/p>\n<\/li>\n
\nDo not use the robot in environments above 40°C or below 0°C.<\/p>\n<\/li>\n
\nIf the robot accidentally enters an incorrect position due to factors such as obstruction, please pause the task immediately and push it back to the correct route before resuming.<\/p>\n<\/li>\n
\nDo not pull or drag the robot while it is running; if you need to push or carry the robot, please click the screen to pause it first.<\/p>\n<\/li>\n
\nDo not push the robot in reverse while it is powered on.<\/p>\n<\/li>\n
\nDo not block the robot's sensors, as this may lead to abnormal movement or loss of positioning.<\/p>\n<\/li>\n
\nDo not hit the device or apply excessive force to the screen, as this may cause damage.<\/p>\n<\/li>\n
\nDo not place loads on the robot, do not place open-flame stoves, and do not carry any flammable solids, gases, or liquids.<\/p>\n<\/li>\n
\nTemporary settings and adjustments are prohibited while the robot is in motion; all operations should be performed after clicking the screen to pause the robot.<\/p>\n<\/li>\n
\nDo not perform cleaning or maintenance work while the machine is powered on and running.<\/p>\n<\/li>\n
\nBefore use, please clear all cables and wires from the floor to avoid dragging them during operation.<\/p>\n<\/li>\n
\nTo ensure safety, please make sure the robot operates at a speed of 1.2 m\/s or below.<\/p>\n<\/li>\n
\nRecognition blind spots exist in the robot's automatic obstacle avoidance system; it is strictly forbidden to suddenly block the robot while it is traveling at high speeds, as this may cause safety accidents.<\/p>\n<\/li>\n
\nWhen transporting the robot, ensure both the clean water tank and the dirty water tank are emptied; do not tilt or flip the machine during transport, as this may damage the body.<\/p>\n<\/li>\n
\nThe robot can use non-foaming, neutral detergents with a pH value of 6–8 (defoamers may be added); the use of strong acids, strong alkalis, or detergents containing active agents is prohibited.<\/p>\n<\/li>\n<\/ul>\n
2.3 Environmental Precautions<\/h3>\n\n\nDo not use or charge the robot in hazardous environments such as high-temperature, high-pressure, flammable, or explosive areas to avoid personal injury or equipment damage.<\/p>\n<\/li>\n
\nDo not dispose of the robot or its accessories as general household waste. Please comply with local laws regarding the disposal of this robot and its accessories and support recycling initiatives.<\/p>\n<\/li>\n
\nThis robot is suitable for flat ground; it is not suitable for environments with steps, excessive slopes, or overly cramped spaces.<\/p>\n<\/li>\n
\nIt is not recommended to use the robot on surfaces with heavy oil stains.<\/p>\n<\/li>\n
\nPower cords and other debris scattered on the floor may trip or entangle the robot; please remove them before use.<\/p>\n<\/li>\n
\nWhen using this product in areas with floor protrusions (such as door sills or floor sockets), ensure the height of the protrusions is within 8mm (during cleaning operations) or within 20mm (non-cleaning, passage only).<\/p>\n<\/li>\n
\nThe passage width for the robot should be greater than 70cm; for long corridors, a width greater than 75cm is recommended for optimal fluidity.<\/p>\n<\/li>\n
\nThe robot's maximum climbing angle is 8° (in non-cleaning mode). To prevent risks associated with the robot sliding or rolling back, avoid pausing the robot while it is climbing a slope.<\/p>\n<\/li>\n
\nThe robot only supports cleaning on flat ground (in cleaning mode); do not use the robot for cleaning operations on visible slopes (greater than 3°).<\/p>\n<\/li>\n
\nGuardrails or other protective barriers must be added at stair edges, downhill entrances, or any locations where there is a risk of the robot falling.<\/p>\n<\/li>\n<\/ul>\n
<\/p>\n
Passage Width Illustration<\/strong><\/p>\n
\n\n\n\n\n\n\nGround Conditions<\/strong><\/td>\n Illustration<\/strong><\/td>\n<\/tr>\n<\/thead>\n
The robot is designed with a maximum climbing angle of 8° (in non-cleaning mode). To prevent potential risks of sliding or rolling back, avoid pausing the machine while it is climbing a slope.<\/td>\n <\/td>\n<\/tr>\n
The robot only supports cleaning on flat ground (in cleaning mode). Do not use the robot for cleaning operations on visible slopes (greater than 3°).<\/td>\n <\/td>\n<\/tr>\n
Surfaces between 14–22cm from the ground that are pure black (e.g., baseboards), mirrored (e.g., glass walls), or fully transparent on all sides may interfere with the robot's LiDAR reflections, causing abnormal movement. These scenarios require evaluation by technical support personnel, and site modifications (such as applying stickers) may be necessary to ensure proper laser reflection.<\/td>\n <\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n3\u3001Product Components<\/h2>\n
3.1 Packing List<\/h3>\nMain Unit x1, Charger x1, Power Key x2, Side Brush x1, Squeegee x1, Dust Mop Rake x1, Scrubbing Roller Brush x2, Sweeping Roller Brush x2, Water Inlet Hose x1, Cleaning Water Gun x1, \"PUDU CC1 User Manual\" x1, Certificate of Conformity x1, Positioning Code x1<\/p>\n
3.2 Appearance and Parts<\/h3>\n<\/p>\n
Rear Cleaning Components:<\/strong><\/p>\n
<\/p>\n
3.3 Performance Parameters<\/h3>\n<\/p>\n
4\u3001Product Usage<\/h2>\n
4.1 Basic Usage<\/h3>\n
4.1.1 Power On, Power Off<\/h4>\nPowering On:<\/p>\n
Ensure the key switch is in the \"ON\" position, then press and hold the Power Button for approximately 0.5 seconds. The blue light strip at the bottom will light up, indicating a successful startup.<\/p>\n
Steps: \u3010Turn on key switch\u3011 → \u3010Long press power button for 0.5s\u3011 → \u3010Bottom blue light strip turns on\u3011<\/p>\n
<\/p>\n
Powering Off:<\/p>\n
Method 1: Press and hold the power button for approximately 6 seconds; the robot will automatically begin the shutdown process. The device is successfully powered off once the screen goes black.<\/p>\n
Steps: \u3010Long press power button for 6s\u3011 → \u3010Screen goes black\/Power off\u3011<\/p>\n
Method 2: On the home screen of the operation interface, go to \"More\" and click \"Power Off.\"<\/p>\n
Steps: \u3010Home Screen\u3011 → \u3010More\u3011 → \u3010Power Off\u3011<\/p>\n
<\/p>\n
4.1.2 Start Cleaning Task<\/h4>\nOn the robot's home screen, click \"Auto Cleaning\" or \"Manual Cleaning\" to select a cleaning task or mode and start the cleaning process.<\/p>\n
<\/p>\n
4.1.3 Pause Cleaning Task<\/h4>\nDuring automatic cleaning operation, tap the wake-up screen and press the Pause button to temporarily suspend robot work.<\/p>\n
<\/p>\n
4.1.4 Resume Cleaning Task<\/h4>\nTo resume operation, tap the Start button on the screen. The robot will continue its pending task<\/p>\n
<\/p>\n
4.2 Handrail Usage<\/h3>\nThe robot's handrail and screen are integrated and have two states: raised or lowered.<\/p>\n
Raise the handrail and screen when you need to push the robot, perform manual cleaning, or interact with the interface. Lower the handrail and screen when the robot is idle or operating in autonomous mode.<\/p>\n
\n\n\n\n\nHandrail Lowered<\/strong><\/td>\n Handrail Raised<\/strong><\/td>\n<\/tr>\n<\/thead>\n
<\/td>\n <\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n4.3 Work Modes<\/h3>\n
4.3.1 Automatic Cleaning<\/h4>\n1\u3001Before starting an automatic cleaning task, ensure the robot is powered on and positioned directly beneath or in front of the visual positioning code (depending on the code's placement) to ensure the robot can successfully localize at the starting point.<\/p>\n
<\/p>\n
2\u3001After clicking \"Auto Cleaning\" on the home screen, select the cleaning task to be executed (pre-configured by delivery personnel). If no selection is made, the default task will be executed. Click \"Start Cleaning\" to begin.<\/p>\n
(Note: During automatic cleaning, the screen handlebar must be lowered; otherwise, the task cannot start normally.)<\/p>\n
Steps: \u3010Home Screen\u3011 → \u3010Auto Cleaning\u3011 → \u3010Select Task\u3011 → \u3010Start Cleaning\u3011<\/p>\n
<\/p>\n
<\/h4>\n
4.3.2 Scheduled Task<\/h4>\nThe robot supports scheduled tasks. Once a scheduled task is set, the robot will automatically execute the task at the preset time, provided that the positioning is normal and there is sufficient power and water.<\/p>\n
Steps: \u3010Home Screen\u3011 → \u3010Scheduled Cleaning\u3011 → \u3010Add New\u3011 → \u3010Add Cleaning Task\u3011 → \u3010Set Time\u3011<\/p>\n
<\/p>\n
<\/p>\n
4.3.3 Manual Cleaning<\/h4>\nAfter raising the handlebar, you can select Manual Cleaning on the home screen and choose the corresponding cleaning mode to put the robot into a cleaning state. At this point, you can push the robot to begin manual cleaning.<\/p>\n
Steps: \u3010Home Screen\u3011 → \u3010Manual Cleaning\u3011<\/p>\n
<\/p>\n
4.4 Cleaning Modes<\/h3>\n
4.4.1 Scrubbing Mode<\/h4>\n1\u3001When the cleaning mode for the robot's task is set to \"Scrubbing,\" ensure that the corresponding scrubbing components have been installed. Details are as follows:<\/p>\n
\n\n\n\n\n\n\n\nSteps<\/strong><\/td>\n Schematic Diagram<\/strong><\/td>\n<\/tr>\n<\/thead>\n
Remove side brush<\/td>\n <\/td>\n<\/tr>\n
Confirm the squeegee is installed<\/td>\n <\/td>\n<\/tr>\n
\nConfirm the filter box in the dirty water tank is installed<\/p>\n
(Note: Do not mistakenly install the dust box)<\/p>\n<\/td>\n <\/td>\n<\/tr>\n
\nIn scrubbing mode, please install the scrubbing roller brushes<\/p>\n
Click \"More\" on the home screen, then click \"Switch Roller Brush.\" The roller brush compartment will automatically lower to a specific height. Push the scrubbing roller brushes flat against the ground into the compartment and fasten the side latches. Click \"Installation Complete,\" and the roller brush compartment will automatically rise.<\/p>\n<\/td>\n \n<\/p>\n
<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
2\u3001The scrubbing task can start normally when the robot detects that the clean water tank has sufficient capacity and the dirty water tank is not full.<\/p>\n
<\/p>\n
<\/h4>\n
4.4.2 Sweeping Mode<\/h4>\nWhen the \"Sweeping\" cleaning mode is selected for a task, the robot enters dry cleaning mode, which features the following three cleaning methods:<\/p>\n
\u2460 \"Sweep + Vacuum + Mop\" mode (default mode), suitable for hard floors<\/p>\n
\u2461 Silent dust mopping, suitable for hard floors<\/p>\n
\u2462 Carpet vacuuming, suitable for short-pile carpets<\/p>\n
Before cleaning, please ensure the corresponding sweeping components have been installed on the robot.<\/strong><\/p>\n
1\u3001Carpet Vacuuming (Short-pile)<\/strong><\/p>\n
\n\n\n\n\n\n\n\nSteps<\/strong><\/td>\n Schematic Diagram<\/strong><\/td>\n<\/tr>\n<\/thead>\n
Remove side brush<\/td>\n <\/td>\n<\/tr>\n
Confirm the sweeping roller brush is installed<\/td>\n <\/td>\n<\/tr>\n
Confirm the dust box in the dirty water tank is installed<\/td>\n <\/td>\n<\/tr>\n
\nInstall the carpet vacuuming component<\/p>\n
(Note: The carpet vacuuming component is optional)<\/p>\n<\/td>\n <\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n2\u3001Silent Dust Mopping \/ Sweep + Vacuum + Mop<\/strong><\/p>\n
\n\n\n\n\n\n\n\nSteps<\/strong><\/td>\n Schematic Diagram<\/strong><\/td>\n<\/tr>\n<\/thead>\n
Confirm side brushes are installed<\/td>\n <\/td>\n<\/tr>\n
Confirm the sweeping roller brush is installed<\/td>\n <\/td>\n<\/tr>\n
Confirm the dust box in the dirty water tank is installed<\/td>\n <\/td>\n<\/tr>\n
Confirm the dust mop vacuum rake is installed<\/td>\n <\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n4.5 Robot Renew Water<\/h3>\n
4.5.1 Manual Water Filling & Draining<\/h4>\n\n\n\n\n\n\n\n\nSteps<\/strong><\/td>\n Schematic Diagram<\/strong><\/td>\n<\/tr>\n<\/thead>\n
\nManual Refilling:<\/p>\n
Connect the water hose to a water source and insert it into the water inlet to begin refilling. The device screen will display the current clean water tank level. Stop refilling when the water level reaches over 95%.<\/p>\n<\/td>\n <\/td>\n<\/tr>\n
\nManual Draining:<\/p>\n
On the home screen, click \"Device Status\" in the top right corner to enter the device status page:<\/p>\n
Steps: \u3010Home Screen\u3011 → \u3010Device Status\u3011 → \u3010Battery & Water\u3011 → \u3010Manual Draining\u3011<\/p>\n<\/td>\n <\/td>\n<\/tr>\n
\nOn the device status page, you can check the clean water level, dirty water level, and consumable status.<\/p>\n<\/td>\n <\/td>\n<\/tr>\n
\nPull out the drainage hose and place the end at a drainage point (such as a floor drain). In the manual draining section, click \"Start.\" The drainage valve will open, and the dirty water from the tank will be discharged through the hose into the floor drain.<\/p>\n<\/td>\n <\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n4.5.2 Auto Water Filling & Draining<\/h4>\nThe robot supports automatic refilling, draining, and charging. These features require the optional installation of a docking station, which must be deployed according to its user manual. Once deployed, the robot can achieve fully automated refilling, draining, and charging.<\/p>\n
4.6 Robot Charging<\/h3>\nCC1 supports both manual and automatic charging.<\/p>\n
\n\n\n\n\n\nCharging Methods<\/strong><\/td>\n <\/td>\n<\/tr>\n<\/thead>\n
\nManual Charging<\/strong><\/p>\n
Connect the robot's charging port to the charging cable. Ensure the connection is secure. If successful, the robot will prompt that it is charging.<\/p>\n<\/td>\n <\/td>\n<\/tr>\n
\nAutomatic Charging<\/strong><\/p>\n
The robot supports automatic charging. This requires the optional installation of a workstation or charging pile, which must be deployed according to the user manual of the chosen equipment. Once deployed, the robot can achieve a fully automated recharging process.<\/p>\n<\/td>\n \n<\/p>\n
Robot docking with charging pile<\/strong><\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
Charing Page<\/p>\n
<\/p>\n
4.7 Device Status<\/h3>\nClick \"Device Status\" on the home screen to enter the device status page.<\/p>\n
From this page, you can check the robot's battery level, clean water level, and dirty water level, as well as the remaining service life of the corresponding consumables.<\/p>\n
Steps: \u3010Home Screen\u3011 → \u3010Device Status\u3011<\/p>\n
<\/p>\n
<\/p>\n
<\/p>\n
Consumables Details Page<\/p>\n
<\/p>\n
<\/p>\n
<\/p>\n
<\/p>\n
<\/p>\n
<\/h3>\n
4.8 Settings<\/h3>\nSettable items include the following:<\/p>\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\nSettings Item<\/strong><\/td>\n Description<\/strong><\/td>\n<\/tr>\n<\/thead>\n
Task Management<\/td>\n Create, modify, and delete cleaning tasks<\/td>\n<\/tr>\n
Cleaning Report<\/td>\n View the robot's past cleaning report records<\/td>\n<\/tr>\n
Cleaning Settings<\/td>\n Adjust settings for AI cleaning and collaborative cleaning between robots<\/td>\n<\/tr>\n
Charging Settings<\/td>\n Select specific charging functions based on site conditions and customer requirements<\/td>\n<\/tr>\n
Network<\/td>\n Connect to a network and adjust network settings<\/td>\n<\/tr>\n
Speed<\/td>\n Set speeds for different cleaning modes<\/td>\n<\/tr>\n
Voice, Lighting, and Animation<\/td>\n Set the robot's voice, lighting, and screen display animations during operation<\/td>\n<\/tr>\n
Map<\/td>\n Map list and entry point for mapping tools<\/td>\n<\/tr>\n
Language and Units<\/td>\n Switch the interface language and toggle between metric and imperial units<\/td>\n<\/tr>\n
Password and Security<\/td>\n Set lock screen passwords and other measures to prevent operation by non-professional personnel<\/td>\n<\/tr>\n
Time<\/td>\n Set the robot's time<\/td>\n<\/tr>\n
Version Upgrade<\/td>\n Display and click to update the robot's software version<\/td>\n<\/tr>\n
Debugging<\/td>\n Adjust internal robot parameters, accessible only to technical support personnel. The company assumes no responsibility for accidents caused by unauthorized operation.<\/td>\n<\/tr>\n
Others<\/td>\n Other robot settings<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n4.9 Common Functions<\/h3>\n
4.9.1 Cleaning Task Settings<\/h4>\n01 Special Scene Cleaning Mode<\/p>\n
Select the appropriate preset cleaning scene based on site conditions without manually adjusting parameters. On the task editing page, click cleaning parameters, select \"Sweeping\" or \"Scrubbing\" mode, and then click \"Special Scenes.\"<\/p>\n
\n\n\n\n\n\nCleaning Mode<\/td>\n Available Modes<\/td>\n<\/tr>\n<\/thead>\n
\nSweeping<\/strong><\/p>\n
Steps: \u3010Manual Cleaning\u3011 →<\/p>\n
\u3010Sweeping\u3011 →<\/p>\n
\u3010Special Scenes\u3011<\/p>\n
Steps: \u3010Auto Cleaning\u3011 → \u3010Select Task\u3011 → \u3010Edit\u3011 → \u3010Cleaning Parameters\u3011 → \u3010Sweeping\u3011 →<\/p>\n
\u3010Special Scenes\u3011<\/p>\n<\/td>\n <\/td>\n<\/tr>\n
\nScrubbing<\/strong><\/p>\n
Steps: \u3010Manual Cleaning\u3011 →<\/p>\n
\u3010Scrubbing\u3011 →<\/p>\n
\u3010Special Scenes\u3011<\/p>\n
Steps: \u3010Auto Cleaning\u3011 → \u3010Select Task\u3011 → \u3010Edit\u3011 → \u3010Cleaning Parameters\u3011 → \u3010Scrubbing\u3011 →<\/p>\n
\u3010Special Scenes\u3011<\/p>\n<\/td>\n <\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n02 Select Maintenance Point<\/p>\n
Add maintenance points during mapping and select them when editing tasks. Once set, the robot can autonomously proceed to a maintenance point to await manual assistance if it encounters errors or anomalies that prevent cleaning but still allow for normal movement.<\/p>\n
Steps: \u3010Auto Cleaning\u3011 → \u3010Select Task\u3011 → \u3010Edit\u3011 → \u3010Maintenance Point\u3011<\/p>\n
<\/p>\n
03 Detergent Settings<\/p>\n
Use this function in conjunction with a workstation (the \"Auto-add Detergent\" option is available when a workstation task is selected).<\/p>\n
Steps: \u3010Settings\u3011 → \u3010Task Management\u3011 → \u3010New\u3011 → \u3010Next\u3011 → \u3010Select Map Area\u3011 → \u3010Cleaning Parameters\u3011 → \u3010Scrubbing\u3011 → \u3010Return Point\/Workstation\u3011 → \u3010Refill & Charge Workstation\u3011 → \u3010Auto-add Detergent\u3011<\/p>\n
<\/p>\n
04 Hibernation Period<\/p>\n
Configure Hibernation Period on the robot by date. Scheduled tasks will not automatically start during these periods. Batch setting of sleep periods for robots under the same store is also supported via Pudulink and the Merchant Platform (ensure both are updated to the latest versions).<\/p>\n
Steps: \u3010Home Screen\u3011 → \u3010Settings\u3011 → \u3010Time\u3011 → \u3010Hibernation Period\u3011<\/p>\n
<\/p>\n
<\/h4>\n
4.9.2 Product Maintenance Settings<\/h4>\n01 Roller Brush Chamber Self-Cleaning<\/p>\n
Use in conjunction with the CC1 optional accessory: Roller Brush Compartment Self-Cleaning Kit. It automatically cleans accumulated dirt inside the roller brush compartment, and cleaning records can be queried on both the device and the cloud platform.<\/p>\n
Steps: \u3010Home Screen\u3011 → \u3010Device Status\u3011 → \u3010Clean Roller Brush Compartment\u3011<\/p>\n
<\/p>\n
02 Self-Cleaning Workstation<\/p>\n
Use in conjunction with the CC1 optional self-cleaning base station. It can fully automate the cleaning of the robot's squeegee, reducing manual maintenance.<\/p>\n
\n\n\n\n\n\nFunction<\/strong><\/td>\n Interface Illustration<\/strong><\/td>\n<\/tr>\n<\/thead>\n
\nSelf-cleaning Records<\/p>\n
Steps: \u3010Home Screen\u3011 → \u3010Device Status\u3011 → \u3010Self-cleaning Workstation\u3011<\/p>\n<\/td>\n <\/td>\n<\/tr>\n
\nExecute self-cleaning after the cleaning task is completed (on the condition that a task with a self-cleaning workstation is selected)<\/p>\n
Steps: \u3010Settings\u3011 → \u3010Task Management\u3011 → \u3010New\u3011 → \u3010Next\u3011 → \u3010Select Map Area\u3011 → \u3010Cleaning Parameters\u3011 → \u3010Scrubbing\u3011 → \u3010Return Point\/Workstation\u3011 → \u3010Self-cleaning Workstation\u3011 → \u3010Execute Self-cleaning\u3011<\/p>\n<\/td>\n \n<\/p>\n
<\/p>\n
<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
4.9.3 Product Interaction Settings<\/h4>\n01 Multi-language Switch<\/p>\n
Switch the operating system language<\/p>\n
Steps: \u3010Home Screen\u3011 → \u3010Settings\u3011 → \u3010Language and Units\u3011 → \u3010Select Language\u3011<\/p>\n
02 Metric\/Imperial Unit Switch<\/p>\n
When enabled, imperial units will be displayed<\/p>\n
Steps: \u3010Home Screen\u3011 → \u3010Settings\u3011 → \u3010Language and Units\u3011 → \u3010Units\u3011<\/p>\n
<\/p>\n
03 Play Voice and Music During Operation<\/p>\n
Steps: \u3010Home Screen\u3011 → \u3010Settings\u3011 → \u3010Voice and Display\u3011 → \u3010Volume, Voice\/Music\u3011<\/p>\n
<\/p>\n
04 Replace Expressions with Custom Images During Operation<\/p>\n
Steps: \u3010Home Screen\u3011 → \u3010Settings\u3011 → \u3010Voice and Display\u3011 → \u3010Screen Display\u3011<\/p>\n
<\/p>\n
05 Screen Accidental Touch Prevention<\/p>\n
Set the standby screen wake-up mode to prevent frequent accidental touches in high-traffic or water-splash environments such as malls, supermarkets, complexes, and swimming pools, which can reduce the cleaning efficiency of the CC1 series.<\/p>\n
Steps: \u3010Home Screen\u3011 → \u3010Settings\u3011 → \u3010Password and Security\u3011 → \u3010Screen Wake-up Mode During Cleaning Task\u3011<\/p>\n
<\/p>\n
5\u3001Product Maintenance & Troubleshooting<\/h2>\n
5.1 Daily Cleaning<\/h3>\n
5.1.1 Cleaning Sensors and the Underside of the Robot<\/h4>\nSensors act as the robot's eyes; if they are obscured by dust, the robot will clean blindly. Therefore, regular cleaning is required.<\/p>\n
\n\n\n\n\n\nCleaning Method<\/td>\n Wipe with a soft, clean cloth<\/td>\n<\/tr>\n<\/thead>\n
Frequency<\/td>\n Every 3–5 weeks<\/td>\n<\/tr>\n
Sensor Cleaning Illustration<\/td>\n <\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n5.1.2 Cleaning Dust Bin, Water Filter Tank, Trash Container & Filter Sponge<\/h4>\nThe accumulation of trash and dust can lead to bacterial growth and affect cleaning performance; please clean them in a timely manner.<\/p>\n
\n\n\n\n\n\n\n\n\nCleaning Method<\/td>\n \n\n\nTrash Box: Use a brush to clean out trash.<\/p>\n<\/li>\n
\nFilter Sponge: Gently tap for routine cleaning; replace directly if heavily soiled. Washing is not recommended. Water Filter Box: Can be rinsed with water.<\/p>\n<\/li>\n
\nDust Box: Empty the dust and tap gently. Do not rinse with water; keep dry.<\/p>\n<\/li>\n<\/ol>\n<\/td>\n<\/tr>\n<\/thead>\n
Frequency<\/td>\n Clean every 2 days, or once to multiple times daily depending on the level of dirt.<\/td>\n<\/tr>\n
Cleaning Illustration<\/td>\n \n<\/p>\n
Trash Box<\/strong><\/p>\n<\/td>\n<\/tr>\n
\n<\/p>\n
Filter Sponge<\/strong><\/p>\n<\/td>\n<\/tr>\n
\n<\/p>\n
Filter Bos<\/strong><\/p>\n<\/td>\n<\/tr>\n
\n<\/p>\n
Dust Bos<\/strong><\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
5.1.3 Cleaning Side Brush & Sweeping\/Scrubbing Roller Brushes<\/h4>\nDuring operation, hair and fine fabrics can become tangled around the side brushes and roller brushes. Failure to clean them for long periods will affect cleaning performance and may even shorten the motor's lifespan.<\/p>\n
\n\n\n\n\n\n\nCleaning Method<\/td>\n \nUse a brush to clean the sweeping\/scrubbing roller brush and remove any entanglements.<\/p>\n
(When the height of the roller brush bristles is lower than that of the red bristles (as shown below), the roller brush needs to be replaced.)<\/p>\n<\/td>\n<\/tr>\n<\/thead>\n
Frequency<\/td>\n Clean every 2 days, or once to multiple times daily depending on the level of dirt.<\/td>\n<\/tr>\n
Cleaning Illustration<\/td>\n \n<\/p>\n
Side Brush Cleaning<\/strong><\/p>\n<\/td>\n<\/tr>\n
\n<\/p>\n
Roller Brush Cleaning<\/strong> Red Bristle Position Illustration<\/strong><\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
5.1.4 Cleaning or Replacing Mop Cloth & Squeegee<\/h4>\nToo much dirt on the dust mop rake will affect the dust mopping performance, and a dirty squeegee will affect the scrubbing performance.<\/p>\n
\n\n\n\n\n\n\nCleaning Method<\/td>\n \n\n\nDust Mop Cloth: Unscrew the knobs and remove the dust mop cloth for washing or direct replacement.<\/p>\n<\/li>\n
\nSqueegee: Rinse with water and wipe with a cloth.<\/p>\n<\/li>\n<\/ol>\n<\/td>\n<\/tr>\n<\/thead>\n
Frequency<\/td>\n \n\n\nDust Mop Cloth: Based on the level of dirt, perform a simple cleaning or remove for washing\/replacement.<\/p>\n<\/li>\n
\nSqueegee: Clean every 2–3 days, or daily depending on the level of dirt.<\/p>\n<\/li>\n<\/ol>\n<\/td>\n<\/tr>\n
Cleaning Illustration<\/td>\n \n<\/p>\n
Dust Mop Cloth Cleaning<\/strong><\/p>\n<\/td>\n<\/tr>\n
\n<\/p>\n
Squeegee Cleaning<\/strong><\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
5.1.5 Cleaning the Dirty Water Tank<\/h4>\nLong-term accumulation of dirt in the dirty water tank will produce foul odors and can easily lead to clogging of the drainage valve.<\/p>\n
\n\n\n\n\n\n\nCleaning Method<\/td>\n Open the drainage valve (drainage switch) to empty the wastewater, then rinse with a water hose and use a brush to scrub the dirty water tank.<\/td>\n<\/tr>\n<\/thead>\n
Frequency<\/td>\n Clean once daily or every other day (if an automated water refill and drainage workstation is deployed, the interior walls of the dirty water tank can be cleaned 1–2 times per week as needed).<\/td>\n<\/tr>\n
Cleaning Illustration<\/td>\n \n<\/p>\n
Drainage<\/strong><\/p>\n<\/td>\n<\/tr>\n
\n<\/p>\n
Dirty Water Tank Cleaning<\/strong><\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
5.1.6 Cleaning the Roller Brush Chamber<\/h4>\nLong-term accumulation of sludge and dirt in the roller brush tray will affect drainage and the overall effectiveness of the scrubbing and cleaning process.<\/p>\n
\n\n\n\n\n\n\nCleaning Method<\/td>\n After draining both the clean and dirty water tanks, tilt the robot backward. Use a wire brush to clean the small holes in the roller brush compartment and a soft brush to clean the compartment itself. Wipe dry with a towel after cleaning.<\/td>\n<\/tr>\n<\/thead>\n
Frequency<\/td>\n It is recommended to clean every 2–3 weeks.<\/td>\n<\/tr>\n
Cleaning Illustration<\/td>\n \n<\/p>\n
Roller Brush Chamber Drainage Position<\/strong><\/p>\n<\/td>\n<\/tr>\n
\n<\/p>\n
Cleaning the Roller Brush Chamber<\/strong><\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
5.1.7 Cleaning the Pollution Pipe<\/h4>\nClogged suction pipes will result in a loss of suction, preventing the robot from properly absorbing water in scrubbing mode. Suction air ducts are typically clogged by a combination of lint and dust.<\/p>\n
\n\n\n\n\n\n\nCleaning Method<\/td>\n Rinse by pouring water into the dirty water tank's discharge port to flush out dirt from the suction pipe. Wipe dry with a towel after cleaning.<\/td>\n<\/tr>\n<\/thead>\n
Frequency<\/td>\n Rinse once a week.<\/td>\n<\/tr>\n
Cleaning Illustration<\/td>\n \n<\/p>\n
Suction Pipe<\/strong><\/p>\n<\/td>\n<\/tr>\n
\n<\/p>\n
Inlet Port Rinsing<\/strong><\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
5.1.8 Cleaning charging plates<\/h4>\nDust or dirt on the charging contacts of the robot or workstation\/charging station can prevent the robot from charging automatically, requiring regular inspection and cleaning.<\/p>\n
\n\n\n\n\n\n\nCleaning Method<\/td>\n Wipe with a soft, clean cloth.<\/td>\n<\/tr>\n<\/thead>\n
Frequency<\/td>\n 3-5 weeks<\/td>\n<\/tr>\n
Cleaning Illustration<\/td>\n \n<\/p>\n
Robot charging plates<\/strong><\/p>\n<\/td>\n<\/tr>\n
\n<\/p>\n
Docking station\/charging pile plates<\/strong><\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
5.1.9 Clean the water tank filter<\/h4>\nA clogged clean water tank filter will prevent the robot vacuum from dispensing water properly during the floor cleaning mode. Clogged clean water tank filters are typically caused by debris and limescale buildup from water pipes.<\/p>\n
\n\n\n\n\n\nCleaning Method<\/td>\n Unscrew the filter cartridge cover in the clean water tank, remove the filter cartridge, and rinse it. After rinsing out the dirt from the filter cartridge, reinstall the filter cartridge and cover.<\/td>\n<\/tr>\n<\/thead>\n
Frequency<\/td>\n 3-5 weeks<\/td>\n<\/tr>\n
Cleaning Illustration<\/td>\n \n<\/p>\n
Clear water tank filter<\/strong><\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
5.2 Consumable Replacement<\/h3>\n\n\n\n\n\n\n\n\n\n\nConsumables<\/strong><\/td>\n Replacement Instructions<\/strong><\/td>\n<\/tr>\n<\/thead>\n
Side Brush Replacement<\/td>\n Side brushes are consumable parts. If wear is detected and the bristles cannot unfold properly for operation, replacement should be considered.<\/td>\n<\/tr>\n
Dual Roller Brushes<\/td>\n Check the roller brush bristles; if the remaining bristle height reaches the specific indicator level (as shown below), they must be replaced.<\/td>\n<\/tr>\n
Squeegee Rubber Blades<\/td>\n \nThe squeegee rubber strips (front and rear) are consumable parts.<\/p>\n
High-wear environments: Recommended replacement every 1 month.<\/p>\n
Medium-wear environments: Recommended replacement every 2 months.<\/p>\n
Low-wear environments: Recommended replacement every 3 months.<\/p>\n<\/td>\n<\/tr>\n
Dust Mop Rake Rubber Blades<\/td>\n \nThe dust mop rake rubber strips (front and rear) are consumable parts.<\/p>\n
High-wear environments: Recommended replacement every 1 month.<\/p>\n
Medium-wear environments: Recommended replacement every 2 months.<\/p>\n
Low-wear environments: Recommended replacement every 3 months.<\/p>\n<\/td>\n<\/tr>\n
Dust Mop Cloth<\/td>\n The dust mop cloth is a consumable part and requires cleaning during daily use; specific replacement depends on the actual dust conditions of the environment.<\/td>\n<\/tr>\n
Dust Box Filter<\/td>\n The dust box filter is a consumable. If vacuuming performance is affected after long-term use and cannot be restored after cleaning, it must be replaced. The specific replacement timing depends on the actual dust conditions of the environment.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n(The replacement timing for the aforementioned consumables can be determined by referring to the \"Consumables\" status page on the robot's status screen.)<\/p>\n
5.3 Troubleshooting<\/h3>\n\n\n\n\n\n\n\n\nFaults<\/strong><\/td>\n Troubleshooting Steps<\/strong><\/td>\n<\/tr>\n<\/thead>\n
Unable to Power On<\/td>\n \n\n\nConfirm whether the key switch is in the \"On\" position.<\/p>\n<\/li>\n
\nCheck if the robot's battery is too low; use the power adapter to charge the robot.<\/p>\n<\/li>\n
\nIf the power adapter fails to charge, the battery may be completely depleted (if left unused for over 30 days). In this case, remove the battery and use the direct charging cable to charge it.<\/p>\n<\/li>\n<\/ol>\n<\/td>\n<\/tr>\n
Debris Not Being Swept In<\/td>\n \n\n\nCheck if the trash box is full. If it is, pull out the trash box and empty the debris before continuing operation.<\/p>\n<\/li>\n
\nCheck the roller brush bristles for wear. If significant wear is confirmed, the roller brush assembly must be replaced.<\/p>\n<\/li>\n<\/ol>\n<\/td>\n<\/tr>\n
Significant Wastewater Left on the Floor; Unable to Suction into Dirty Water Tank<\/td>\n \n\n\nConfirm that the dirty water tank lid is correctly installed.<\/p>\n<\/li>\n
\nRemove the squeegee and check if the suction pipe has suction and whether the wastewater pipe is clogged. If clogged, clear the blockage before use.<\/p>\n<\/li>\n<\/ol>\n<\/td>\n<\/tr>\n
Unable to Drain Wastewater<\/td>\n Check if the squeegee rubber blades are worn. If they are, please replace the rubber blades.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\nAfter-Sales Policy<\/h2>\nShenzhen Pudu Technology Co., Ltd. promises to provide free product warranty services starting from the date of product activation within the valid warranty period (warranty periods may vary for different components), and customers are not required to pay after-sales service fees. For cases exceeding the warranty period or not falling under the free warranty service, fees will be charged according to standard prices. Customers should contact the official after-sales service hotline to arrange repairs.<\/p>\n
Pudu Technology will provide warranty service if the following conditions are met:\uff1a<\/p>\n
1\u3001Within the product warranty period:<\/p>\n
\n\nNon-human quality issues occur under normal use.<\/p>\n<\/li>\n
\nNo unauthorized disassembly or repair; no water or foreign object ingress; no collision or drop.<\/p>\n<\/li>\n
\nThe product serial number, factory labels, and other markings show no signs of tearing or tampering.<\/p>\n<\/li>\n
\nValid proof of purchase, receipts, and order numbers are provided.<\/p>\n<\/li>\n
\nDamaged spare parts replaced during the warranty period belong to Pudu Technology.<\/p>\n<\/li>\n<\/ol>\n
2\u3001Pudu Technology will charge for repairs in any of the following situations:<\/p>\n
\n\nThe product exceeds the warranty period.<\/p>\n<\/li>\n
\nThe product serial number, factory labels, or other markings are torn, tampered with, or unrecognizable.<\/p>\n<\/li>\n
\nQuality issues caused by collisions or burning not resulting from the product's own quality, or ingress of foreign objects (water, oil, sand, etc.).<\/p>\n<\/li>\n
\nDamage caused by unauthorized modification, disassembly, opening of the shell, or repairs not guided by official instructions.<\/p>\n<\/li>\n
\nDamage caused by incorrect installation, use, charging, or storage not in accordance with the product manual and installation guide.<\/p>\n<\/li>\n
\nDamage caused by using cleaning detergents not specified in official instructions.<\/p>\n<\/li>\n
\nFailure of accessories or components other than the main warranty parts.<\/p>\n<\/li>\n
\nFaults or damage caused by force majeure (such as earthquakes, fires, or wars). <\/p>\n<\/li>\n<\/ol>\n
After-sales Service Consultation:<\/p>\n
If you have any questions, please contact Pudu Technology Headquarters:<\/p>\n
Official After-sales Email: techservice@pudutech.com<\/p>\n
Official After-sales Hotline: 400-0826-660<\/p>","pure_content":"PUDU CC1 Operation Guide V6.0\nPUDU_CC1_Operation_Guide_V6.0.pdf\nDocument Version: V6.0\nModel: CCBC01\/CCBC01N\nShenzhen Pudu Technology Co., Ltd.\nCopyright \u00a9 Shenzhen Pudu Technology Co., Ltd. 2026. All rights reserved.\nNo part or all of the content of this operation manual may be reproduced, copied, transcribed, or translated in any form (electronic, photocopying, recording, etc.) for any purpose without the explicit written permission of Shenzhen Pudu Technology Co., Ltd., nor may it be disseminated for commercial purposes. The product specifications and information mentioned in this operation manual are for reference only; if the content is updated, no separate notice will be given. Unless otherwise specified, this operation manual serves only as a usage guide, and no statements herein constitute any form of warranty.\nPurpose\nThis manual introduces how to use and maintain the PUDU CC1. It is applicable to users, sales personnel, technical support engineers, and installation\/commissioning engineers.\nRevision History\n\n\n\n Date\n Revision History\n\n\n\n\n 2023\/10\/12\n First Release\n\n\n 2023\/11\/27\n After-sales Policy Revision\n\n\n 2024\/04\/10\n Revision of Partial Specifications and Content\n\n\n 2026\/03\/13\n Content Update\n\n\n\nSymbol Convetions\nThe following symbols may appear in this manual, and their meanings are as follows.\n\n\n\n Symbol\n Description\n\n\n\n\n Danger\n Indicates a high potential hazard that, if not avoided, will result in death or serious injury.\n\n\n Warning\n Indicates a moderate or low potential hazard that, if not avoided, could result in minor injury to personnel, damage to the robot, etc.\n\n\n Caution\n Indicates a potential risk that, if these texts are ignored, could result in damage to the robot, data loss, or unpredictable results.\n\n\n Notes\n Indicates additional information to the main text, emphasizing and supplementing the main text.\n\n\n\n\nContents\nPurpose 2\nRevision History 2\nSymbol Convetions 3\nContents 4\n1\u3001Intended Use 7\n2\u3001Safety Instructions 8\n2.1 Power Supply Precautions 8\n2.2 Usage Precautions 8\n2.3 Environmental Precautions 9\n3\u3001Product Components 12\n3.1 Packing List 12\n3.2 Appearance and Parts 12\n3.3 Performance Parameters 14\n4\u3001Product Usage 15\n4.1 Basic Usage 15\n4.1.1 Power On, Power Off 15\n4.1.2 Start Cleaning Task 16\n4.1.3 Pause Cleaning Task 16\n4.1.4 Resume Cleaning Task 17\n4.2 Handrail Usage 17\n4.3 Work Modes 18\n4.3.1 Automatic Cleaning 18\n4.3.2 Scheduled Task 19\n4.3.3 Manual Cleaning 19\n4.4 Cleaning Modes 20\n4.4.1 Scrubbing Mode 20\n4.4.2 Sweeping Mode 22\n4.5 Robot Renew Water 24\n4.5.1 Manual Water Filling & Draining 24\n4.5.2 Auto Water Filling & Draining 25\n4.6 Robot Charging 26\n4.7 Device Status 28\n4.8 Settings 29\n4.9 Common Functions 30\n4.9.1 Cleaning Task Settings 30\n4.9.2 Product Maintenance Settings 33\n4.9.3 Product Interaction Settings 36\n5\u3001Product Maintenance & Troubleshooting 40\n5.1 Daily Cleaning 40\n5.1.1 Cleaning Sensors and the Underside of the Robot 40\n5.1.2 Cleaning Dust Bin, Water Filter Tank, Trash Container & Filter Sponge 40\n5.1.3 Cleaning Side Brush & Sweeping\/Scrubbing Roller Brushes 42\n5.1.4 Cleaning or Replacing Mop Cloth & Squeegee 43\n5.1.5 Cleaning the Dirty Water Tank 44\n5.1.6 Cleaning the Roller Brush Chamber 45\n5.1.7 Cleaning the Pollution Pipe 46\n5.1.8 Cleaning charging plates 46\n5.1.9 Clean the water tank filter 47\n5.2 Consumable Replacement 48\n5.3 Troubleshooting 49\nAfter-Sales Policy 50\n1\u3001Intended Use\n\nThe PUDU CC1 cleaning robot is a multi-functional cleaning robot positioned for small and medium-sized scenarios. It integrates sweeping, scrubbing, (carpet) vacuuming, and dust mopping into one unit, supporting autonomous water refilling and drainage, autonomous charging, and autonomous maintenance. It is suitable for public areas such as office buildings, commercial buildings, and residential common areas. It can clean various floor types, including terrazzo, marble, floor tiles, epoxy resin, sandstone, artificial stone, and short-pile hard carpets.\nThe product's core advantage lies in its ability to meet the diverse cleaning needs of various hard floors and short-pile hard carpets, allowing customers to use one machine for multiple purposes. Its primary target scenarios include light-soil indoor environments such as retail malls, office buildings, commercial buildings, and apartment hotels. While reducing costs and increasing efficiency for customers, it also enhances the overall cleanliness and quality of the environment.\n\n2\u3001Safety Instructions\n2.1 Power Supply Precautions\n\n\nIt is strictly forbidden to use non-original chargers to charge the robot. If the charger is found to be damaged, please replace it immediately.\n\n\nFor the first use, please fully charge the battery to 100%.\n\n\nTo ensure the efficiency and battery life of the robot, please keep the battery level above 10% at all times.\n\n\nWhen the battery is below 10%, the robot is in a low battery state and needs to be charged as soon as possible.\n\n\nWhen the battery is below 2%, it enters battery protection mode; the robot will not be able to perform tasks and must be charged before use.\n\n\nIf the machine will not be used for a long period, please turn the power key switch to the \"OFF\" position.\n\n\nIf the robot is to be used after being idle for a long time, please fully charge it before use.\n\n\n2.2 Usage Precautions\n\n\nThis product is a wheeled autonomous cleaning robot and is limited to indoor flat environments; do not use it in outdoor environments (such as open balconies) or on rugged ground (such as stairs).\n\n\nDo not use the robot in environments above 40\u00b0C or below 0\u00b0C.\n\n\nIf the robot accidentally enters an incorrect position due to factors such as obstruction, please pause the task immediately and push it back to the correct route before resuming.\n\n\nDo not pull or drag the robot while it is running; if you need to push or carry the robot, please click the screen to pause it first.\n\n\nDo not push the robot in reverse while it is powered on.\n\n\nDo not block the robot's sensors, as this may lead to abnormal movement or loss of positioning.\n\n\nDo not hit the device or apply excessive force to the screen, as this may cause damage.\n\n\nDo not place loads on the robot, do not place open-flame stoves, and do not carry any flammable solids, gases, or liquids.\n\n\nTemporary settings and adjustments are prohibited while the robot is in motion; all operations should be performed after clicking the screen to pause the robot.\n\n\nDo not perform cleaning or maintenance work while the machine is powered on and running.\n\n\nBefore use, please clear all cables and wires from the floor to avoid dragging them during operation.\n\n\nTo ensure safety, please make sure the robot operates at a speed of 1.2 m\/s or below.\n\n\nRecognition blind spots exist in the robot's automatic obstacle avoidance system; it is strictly forbidden to suddenly block the robot while it is traveling at high speeds, as this may cause safety accidents.\n\n\nWhen transporting the robot, ensure both the clean water tank and the dirty water tank are emptied; do not tilt or flip the machine during transport, as this may damage the body.\n\n\nThe robot can use non-foaming, neutral detergents with a pH value of 6\u20138 (defoamers may be added); the use of strong acids, strong alkalis, or detergents containing active agents is prohibited.\n\n\n2.3 Environmental Precautions\n\n\nDo not use or charge the robot in hazardous environments such as high-temperature, high-pressure, flammable, or explosive areas to avoid personal injury or equipment damage.\n\n\nDo not dispose of the robot or its accessories as general household waste. Please comply with local laws regarding the disposal of this robot and its accessories and support recycling initiatives.\n\n\nThis robot is suitable for flat ground; it is not suitable for environments with steps, excessive slopes, or overly cramped spaces.\n\n\nIt is not recommended to use the robot on surfaces with heavy oil stains.\n\n\nPower cords and other debris scattered on the floor may trip or entangle the robot; please remove them before use.\n\n\nWhen using this product in areas with floor protrusions (such as door sills or floor sockets), ensure the height of the protrusions is within 8mm (during cleaning operations) or within 20mm (non-cleaning, passage only).\n\n\nThe passage width for the robot should be greater than 70cm; for long corridors, a width greater than 75cm is recommended for optimal fluidity.\n\n\nThe robot's maximum climbing angle is 8\u00b0 (in non-cleaning mode). To prevent risks associated with the robot sliding or rolling back, avoid pausing the robot while it is climbing a slope.\n\n\nThe robot only supports cleaning on flat ground (in cleaning mode); do not use the robot for cleaning operations on visible slopes (greater than 3\u00b0).\n\n\nGuardrails or other protective barriers must be added at stair edges, downhill entrances, or any locations where there is a risk of the robot falling.\n\n\n\nPassage Width Illustration\n\n\n\n Ground Conditions\n Illustration\n\n\n\n\n The robot is designed with a maximum climbing angle of 8\u00b0 (in non-cleaning mode). To prevent potential risks of sliding or rolling back, avoid pausing the machine while it is climbing a slope.\n \n\n\n The robot only supports cleaning on flat ground (in cleaning mode). Do not use the robot for cleaning operations on visible slopes (greater than 3\u00b0).\n \n\n\n Surfaces between 14\u201322cm from the ground that are pure black (e.g., baseboards), mirrored (e.g., glass walls), or fully transparent on all sides may interfere with the robot's LiDAR reflections, causing abnormal movement. These scenarios require evaluation by technical support personnel, and site modifications (such as applying stickers) may be necessary to ensure proper laser reflection.\n \n\n\n\n3\u3001Product Components\n3.1 Packing List\nMain Unit x1, Charger x1, Power Key x2, Side Brush x1, Squeegee x1, Dust Mop Rake x1, Scrubbing Roller Brush x2, Sweeping Roller Brush x2, Water Inlet Hose x1, Cleaning Water Gun x1, \"PUDU CC1 User Manual\" x1, Certificate of Conformity x1, Positioning Code x1\n3.2 Appearance and Parts\n\nRear Cleaning Components:\n\n3.3 Performance Parameters\n\n4\u3001Product Usage\n4.1 Basic Usage\n4.1.1 Power On, Power Off\nPowering On:\nEnsure the key switch is in the \"ON\" position, then press and hold the Power Button for approximately 0.5 seconds. The blue light strip at the bottom will light up, indicating a successful startup.\nSteps: \u3010Turn on key switch\u3011 \u2192 \u3010Long press power button for 0.5s\u3011 \u2192 \u3010Bottom blue light strip turns on\u3011\n\nPowering Off:\nMethod 1: Press and hold the power button for approximately 6 seconds; the robot will automatically begin the shutdown process. The device is successfully powered off once the screen goes black.\nSteps: \u3010Long press power button for 6s\u3011 \u2192 \u3010Screen goes black\/Power off\u3011\nMethod 2: On the home screen of the operation interface, go to \"More\" and click \"Power Off.\"\nSteps: \u3010Home Screen\u3011 \u2192 \u3010More\u3011 \u2192 \u3010Power Off\u3011\n\n4.1.2 Start Cleaning Task\nOn the robot's home screen, click \"Auto Cleaning\" or \"Manual Cleaning\" to select a cleaning task or mode and start the cleaning process.\n\n4.1.3 Pause Cleaning Task\nDuring automatic cleaning operation, tap the wake-up screen and press the Pause button to temporarily suspend robot work.\n\n4.1.4 Resume Cleaning Task\nTo resume operation, tap the Start button on the screen. The robot will continue its pending task\n\n4.2 Handrail Usage\nThe robot's handrail and screen are integrated and have two states: raised or lowered.\nRaise the handrail and screen when you need to push the robot, perform manual cleaning, or interact with the interface. Lower the handrail and screen when the robot is idle or operating in autonomous mode.\n\n\n\n Handrail Lowered\n Handrail Raised\n\n\n\n\n \n \n\n\n\n4.3 Work Modes\n4.3.1 Automatic Cleaning\n1\u3001Before starting an automatic cleaning task, ensure the robot is powered on and positioned directly beneath or in front of the visual positioning code (depending on the code's placement) to ensure the robot can successfully localize at the starting point.\n\n2\u3001After clicking \"Auto Cleaning\" on the home screen, select the cleaning task to be executed (pre-configured by delivery personnel). If no selection is made, the default task will be executed. Click \"Start Cleaning\" to begin.\n(Note: During automatic cleaning, the screen handlebar must be lowered; otherwise, the task cannot start normally.)\nSteps: \u3010Home Screen\u3011 \u2192 \u3010Auto Cleaning\u3011 \u2192 \u3010Select Task\u3011 \u2192 \u3010Start Cleaning\u3011\n\n\n4.3.2 Scheduled Task\nThe robot supports scheduled tasks. Once a scheduled task is set, the robot will automatically execute the task at the preset time, provided that the positioning is normal and there is sufficient power and water.\nSteps: \u3010Home Screen\u3011 \u2192 \u3010Scheduled Cleaning\u3011 \u2192 \u3010Add New\u3011 \u2192 \u3010Add Cleaning Task\u3011 \u2192 \u3010Set Time\u3011\n\n\n4.3.3 Manual Cleaning\nAfter raising the handlebar, you can select Manual Cleaning on the home screen and choose the corresponding cleaning mode to put the robot into a cleaning state. At this point, you can push the robot to begin manual cleaning.\nSteps: \u3010Home Screen\u3011 \u2192 \u3010Manual Cleaning\u3011\n\n4.4 Cleaning Modes\n4.4.1 Scrubbing Mode\n1\u3001When the cleaning mode for the robot's task is set to \"Scrubbing,\" ensure that the corresponding scrubbing components have been installed. Details are as follows:\n\n\n\n Steps\n Schematic Diagram\n\n\n\n\n Remove side brush\n \n\n\n Confirm the squeegee is installed\n \n\n\n Confirm the filter box in the dirty water tank is installed\n(Note: Do not mistakenly install the dust box)\n \n\n\n In scrubbing mode, please install the scrubbing roller brushes\nClick \"More\" on the home screen, then click \"Switch Roller Brush.\" The roller brush compartment will automatically lower to a specific height. Push the scrubbing roller brushes flat against the ground into the compartment and fasten the side latches. Click \"Installation Complete,\" and the roller brush compartment will automatically rise.\n \n\n\n\n2\u3001The scrubbing task can start normally when the robot detects that the clean water tank has sufficient capacity and the dirty water tank is not full.\n\n\n4.4.2 Sweeping Mode\nWhen the \"Sweeping\" cleaning mode is selected for a task, the robot enters dry cleaning mode, which features the following three cleaning methods:\n\u2460 \"Sweep + Vacuum + Mop\" mode (default mode), suitable for hard floors\n\u2461 Silent dust mopping, suitable for hard floors\n\u2462 Carpet vacuuming, suitable for short-pile carpets\nBefore cleaning, please ensure the corresponding sweeping components have been installed on the robot.\n1\u3001Carpet Vacuuming (Short-pile)\n\n\n\n Steps\n Schematic Diagram\n\n\n\n\n Remove side brush\n \n\n\n Confirm the sweeping roller brush is installed\n \n\n\n Confirm the dust box in the dirty water tank is installed\n \n\n\n Install the carpet vacuuming component\n(Note: The carpet vacuuming component is optional)\n \n\n\n\n2\u3001Silent Dust Mopping \/ Sweep + Vacuum + Mop\n\n\n\n Steps\n Schematic Diagram\n\n\n\n\n Confirm side brushes are installed\n \n\n\n Confirm the sweeping roller brush is installed\n \n\n\n Confirm the dust box in the dirty water tank is installed\n \n\n\n Confirm the dust mop vacuum rake is installed\n \n\n\n\n4.5 Robot Renew Water\n4.5.1 Manual Water Filling & Draining\n\n\n\n Steps\n Schematic Diagram\n\n\n\n\n Manual Refilling:\nConnect the water hose to a water source and insert it into the water inlet to begin refilling. The device screen will display the current clean water tank level. Stop refilling when the water level reaches over 95%.\n \n\n\n Manual Draining:\nOn the home screen, click \"Device Status\" in the top right corner to enter the device status page:\nSteps: \u3010Home Screen\u3011 \u2192 \u3010Device Status\u3011 \u2192 \u3010Battery & Water\u3011 \u2192 \u3010Manual Draining\u3011\n \n\n\n On the device status page, you can check the clean water level, dirty water level, and consumable status.\n \n\n\n Pull out the drainage hose and place the end at a drainage point (such as a floor drain). In the manual draining section, click \"Start.\" The drainage valve will open, and the dirty water from the tank will be discharged through the hose into the floor drain.\n \n\n\n\n4.5.2 Auto Water Filling & Draining\nThe robot supports automatic refilling, draining, and charging. These features require the optional installation of a docking station, which must be deployed according to its user manual. Once deployed, the robot can achieve fully automated refilling, draining, and charging.\n4.6 Robot Charging\nCC1 supports both manual and automatic charging.\n\n\n\n Charging Methods\n \u00a0\n\n\n\n\n Manual Charging\nConnect the robot's charging port to the charging cable. Ensure the connection is secure. If successful, the robot will prompt that it is charging.\n \n\n\n Automatic Charging\nThe robot supports automatic charging. This requires the optional installation of a workstation or charging pile, which must be deployed according to the user manual of the chosen equipment. Once deployed, the robot can achieve a fully automated recharging process.\n Robot docking with charging pile\n\n\n\nCharing Page\n\n4.7 Device Status\nClick \"Device Status\" on the home screen to enter the device status page.\nFrom this page, you can check the robot's battery level, clean water level, and dirty water level, as well as the remaining service life of the corresponding consumables.\nSteps: \u3010Home Screen\u3011 \u2192 \u3010Device Status\u3011\n\n\n\nConsumables Details Page\n\n\n\n\n\n\n4.8 Settings\nSettable items include the following:\n\n\n\n Settings Item\n Description\n\n\n\n\n Task Management\n Create, modify, and delete cleaning tasks\n\n\n Cleaning Report\n View the robot's past cleaning report records\n\n\n Cleaning Settings\n Adjust settings for AI cleaning and collaborative cleaning between robots\n\n\n Charging Settings\n Select specific charging functions based on site conditions and customer requirements\n\n\n Network\n Connect to a network and adjust network settings\n\n\n Speed\n Set speeds for different cleaning modes\n\n\n Voice, Lighting, and Animation\n Set the robot's voice, lighting, and screen display animations during operation\n\n\n Map\n Map list and entry point for mapping tools\n\n\n Language and Units\n Switch the interface language and toggle between metric and imperial units\n\n\n Password and Security\n Set lock screen passwords and other measures to prevent operation by non-professional personnel\n\n\n Time\n Set the robot's time\n\n\n Version Upgrade\n Display and click to update the robot's software version\n\n\n Debugging\n Adjust internal robot parameters, accessible only to technical support personnel. The company assumes no responsibility for accidents caused by unauthorized operation.\n\n\n Others\n Other robot settings\n\n\n\n4.9 Common Functions\n4.9.1 Cleaning Task Settings\n01 Special Scene Cleaning Mode\nSelect the appropriate preset cleaning scene based on site conditions without manually adjusting parameters. On the task editing page, click cleaning parameters, select \"Sweeping\" or \"Scrubbing\" mode, and then click \"Special Scenes.\"\n\n\n\n Cleaning Mode\n Available Modes\n\n\n\n\n Sweeping\nSteps: \u3010Manual Cleaning\u3011 \u2192\n\u3010Sweeping\u3011 \u2192\n\u3010Special Scenes\u3011\nSteps: \u3010Auto Cleaning\u3011 \u2192 \u3010Select Task\u3011 \u2192 \u3010Edit\u3011 \u2192 \u3010Cleaning Parameters\u3011 \u2192 \u3010Sweeping\u3011 \u2192\n\u3010Special Scenes\u3011\n \n\n\n Scrubbing\nSteps: \u3010Manual Cleaning\u3011 \u2192\n\u3010Scrubbing\u3011 \u2192\n\u3010Special Scenes\u3011\nSteps: \u3010Auto Cleaning\u3011 \u2192 \u3010Select Task\u3011 \u2192 \u3010Edit\u3011 \u2192 \u3010Cleaning Parameters\u3011 \u2192 \u3010Scrubbing\u3011 \u2192\n\u3010Special Scenes\u3011\n \n\n\n\n02 Select Maintenance Point\nAdd maintenance points during mapping and select them when editing tasks. Once set, the robot can autonomously proceed to a maintenance point to await manual assistance if it encounters errors or anomalies that prevent cleaning but still allow for normal movement.\nSteps: \u3010Auto Cleaning\u3011 \u2192 \u3010Select Task\u3011 \u2192 \u3010Edit\u3011 \u2192 \u3010Maintenance Point\u3011\n\n03 Detergent Settings\nUse this function in conjunction with a workstation (the \"Auto-add Detergent\" option is available when a workstation task is selected).\nSteps: \u3010Settings\u3011 \u2192 \u3010Task Management\u3011 \u2192 \u3010New\u3011 \u2192 \u3010Next\u3011 \u2192 \u3010Select Map Area\u3011 \u2192 \u3010Cleaning Parameters\u3011 \u2192 \u3010Scrubbing\u3011 \u2192 \u3010Return Point\/Workstation\u3011 \u2192 \u3010Refill & Charge Workstation\u3011 \u2192 \u3010Auto-add Detergent\u3011\n\n04 Hibernation Period\nConfigure Hibernation Period on the robot by date. Scheduled tasks will not automatically start during these periods. Batch setting of sleep periods for robots under the same store is also supported via Pudulink and the Merchant Platform (ensure both are updated to the latest versions).\nSteps: \u3010Home Screen\u3011 \u2192 \u3010Settings\u3011 \u2192 \u3010Time\u3011 \u2192 \u3010Hibernation Period\u3011\n\n\n4.9.2 Product Maintenance Settings\n01 Roller Brush Chamber Self-Cleaning\nUse in conjunction with the CC1 optional accessory: Roller Brush Compartment Self-Cleaning Kit. It automatically cleans accumulated dirt inside the roller brush compartment, and cleaning records can be queried on both the device and the cloud platform.\nSteps: \u3010Home Screen\u3011 \u2192 \u3010Device Status\u3011 \u2192 \u3010Clean Roller Brush Compartment\u3011\n\n02 Self-Cleaning Workstation\nUse in conjunction with the CC1 optional self-cleaning base station. It can fully automate the cleaning of the robot's squeegee, reducing manual maintenance.\n\n\n\n Function\n Interface Illustration\n\n\n\n\n Self-cleaning Records\nSteps: \u3010Home Screen\u3011 \u2192 \u3010Device Status\u3011 \u2192 \u3010Self-cleaning Workstation\u3011\n \n\n\n Execute self-cleaning after the cleaning task is completed (on the condition that a task with a self-cleaning workstation is selected)\nSteps: \u3010Settings\u3011 \u2192 \u3010Task Management\u3011 \u2192 \u3010New\u3011 \u2192 \u3010Next\u3011 \u2192 \u3010Select Map Area\u3011 \u2192 \u3010Cleaning Parameters\u3011 \u2192 \u3010Scrubbing\u3011 \u2192 \u3010Return Point\/Workstation\u3011 \u2192 \u3010Self-cleaning Workstation\u3011 \u2192 \u3010Execute Self-cleaning\u3011\n \n\n\n\n4.9.3 Product Interaction Settings\n01 Multi-language Switch\nSwitch the operating system language\nSteps: \u3010Home Screen\u3011 \u2192 \u3010Settings\u3011 \u2192 \u3010Language and Units\u3011 \u2192 \u3010Select Language\u3011\n02 Metric\/Imperial Unit Switch\nWhen enabled, imperial units will be displayed\nSteps: \u3010Home Screen\u3011 \u2192 \u3010Settings\u3011 \u2192 \u3010Language and Units\u3011 \u2192 \u3010Units\u3011\n\n03 Play Voice and Music During Operation\nSteps: \u3010Home Screen\u3011 \u2192 \u3010Settings\u3011 \u2192 \u3010Voice and Display\u3011 \u2192 \u3010Volume, Voice\/Music\u3011\n\n04 Replace Expressions with Custom Images During Operation\nSteps: \u3010Home Screen\u3011 \u2192 \u3010Settings\u3011 \u2192 \u3010Voice and Display\u3011 \u2192 \u3010Screen Display\u3011\n\n05 Screen Accidental Touch Prevention\nSet the standby screen wake-up mode to prevent frequent accidental touches in high-traffic or water-splash environments such as malls, supermarkets, complexes, and swimming pools, which can reduce the cleaning efficiency of the CC1 series.\nSteps: \u3010Home Screen\u3011 \u2192 \u3010Settings\u3011 \u2192 \u3010Password and Security\u3011 \u2192 \u3010Screen Wake-up Mode During Cleaning Task\u3011\n\n5\u3001Product Maintenance & Troubleshooting\n5.1 Daily Cleaning\n5.1.1 Cleaning Sensors and the Underside of the Robot\nSensors act as the robot's eyes; if they are obscured by dust, the robot will clean blindly. Therefore, regular cleaning is required.\n\n\n\n Cleaning Method\n Wipe with a soft, clean cloth\n\n\n\n\n Frequency\n Every 3\u20135 weeks\n\n\n Sensor Cleaning Illustration\n \n\n\n\n5.1.2 Cleaning Dust Bin, Water Filter Tank, Trash Container & Filter Sponge\nThe accumulation of trash and dust can lead to bacterial growth and affect cleaning performance; please clean them in a timely manner.\n\n\n\n Cleaning Method\n Trash Box: Use a brush to clean out trash.\n\n\nFilter Sponge: Gently tap for routine cleaning; replace directly if heavily soiled. Washing is not recommended. Water Filter Box: Can be rinsed with water.\n\n\nDust Box: Empty the dust and tap gently. Do not rinse with water; keep dry.\n\n\n\n\n Frequency\n Clean every 2 days, or once to multiple times daily depending on the level of dirt.\n\n\n Cleaning Illustration\n Trash Box\n\n\n Filter Sponge\n\n\n Filter Bos\n\n\n Dust Bos\n\n\n\n5.1.3 Cleaning Side Brush & Sweeping\/Scrubbing Roller Brushes\nDuring operation, hair and fine fabrics can become tangled around the side brushes and roller brushes. Failure to clean them for long periods will affect cleaning performance and may even shorten the motor's lifespan.\n\n\n\n Cleaning Method\n Use a brush to clean the sweeping\/scrubbing roller brush and remove any entanglements.\n(When the height of the roller brush bristles is lower than that of the red bristles (as shown below), the roller brush needs to be replaced.)\n\n\n\n\n Frequency\n Clean every 2 days, or once to multiple times daily depending on the level of dirt.\n\n\n Cleaning Illustration\n Side Brush Cleaning\n\n\n Roller Brush Cleaning Red Bristle Position Illustration\n\n\n\n5.1.4 Cleaning or Replacing Mop Cloth & Squeegee\nToo much dirt on the dust mop rake will affect the dust mopping performance, and a dirty squeegee will affect the scrubbing performance.\n\n\n\n Cleaning Method\n Dust Mop Cloth: Unscrew the knobs and remove the dust mop cloth for washing or direct replacement.\n\n\nSqueegee: Rinse with water and wipe with a cloth.\n\n\n\n\n Frequency\n Dust Mop Cloth: Based on the level of dirt, perform a simple cleaning or remove for washing\/replacement.\n\n\nSqueegee: Clean every 2\u20133 days, or daily depending on the level of dirt.\n\n\n Cleaning Illustration\n Dust Mop Cloth Cleaning\n\n\n Squeegee Cleaning\n\n\n\n5.1.5 Cleaning the Dirty Water Tank\nLong-term accumulation of dirt in the dirty water tank will produce foul odors and can easily lead to clogging of the drainage valve.\n\n\n\n Cleaning Method\n Open the drainage valve (drainage switch) to empty the wastewater, then rinse with a water hose and use a brush to scrub the dirty water tank.\n\n\n\n\n Frequency\n Clean once daily or every other day (if an automated water refill and drainage workstation is deployed, the interior walls of the dirty water tank can be cleaned 1\u20132 times per week as needed).\n\n\n Cleaning Illustration\n Drainage\n\n\n Dirty Water Tank Cleaning\n\n\n\n5.1.6 Cleaning the Roller Brush Chamber\nLong-term accumulation of sludge and dirt in the roller brush tray will affect drainage and the overall effectiveness of the scrubbing and cleaning process.\n\n\n\n Cleaning Method\n After draining both the clean and dirty water tanks, tilt the robot backward. Use a wire brush to clean the small holes in the roller brush compartment and a soft brush to clean the compartment itself. Wipe dry with a towel after cleaning.\n\n\n\n\n Frequency\n It is recommended to clean every 2\u20133 weeks.\n\n\n Cleaning Illustration\n Roller Brush Chamber Drainage Position\n\n\n Cleaning the Roller Brush Chamber\n\n\n\n5.1.7 Cleaning the Pollution Pipe\nClogged suction pipes will result in a loss of suction, preventing the robot from properly absorbing water in scrubbing mode. Suction air ducts are typically clogged by a combination of lint and dust.\n\n\n\n Cleaning Method\n Rinse by pouring water into the dirty water tank's discharge port to flush out dirt from the suction pipe. Wipe dry with a towel after cleaning.\n\n\n\n\n Frequency\n Rinse once a week.\n\n\n Cleaning Illustration\n Suction Pipe\n\n\n Inlet Port Rinsing\n\n\n\n5.1.8 Cleaning charging plates\nDust or dirt on the charging contacts of the robot or workstation\/charging station can prevent the robot from charging automatically, requiring regular inspection and cleaning.\n\n\n\n Cleaning Method\n Wipe with a soft, clean cloth.\n\n\n\n\n Frequency\n 3-5 weeks\n\n\n Cleaning Illustration\n Robot charging plates\n\n\n Docking station\/charging pile plates\n\n\n\n5.1.9 Clean the water tank filter\nA clogged clean water tank filter will prevent the robot vacuum from dispensing water properly during the floor cleaning mode. Clogged clean water tank filters are typically caused by debris and limescale buildup from water pipes.\n\n\n\n Cleaning Method\n Unscrew the filter cartridge cover in the clean water tank, remove the filter cartridge, and rinse it. After rinsing out the dirt from the filter cartridge, reinstall the filter cartridge and cover.\n\n\n\n\n Frequency\n 3-5 weeks\n\n\n Cleaning Illustration\n Clear water tank filter\n\n\n\n5.2 Consumable Replacement\n\n\n\n Consumables\n Replacement Instructions\n\n\n\n\n Side Brush Replacement\n Side brushes are consumable parts. If wear is detected and the bristles cannot unfold properly for operation, replacement should be considered.\n\n\n Dual Roller Brushes\n Check the roller brush bristles; if the remaining bristle height reaches the specific indicator level (as shown below), they must be replaced.\n\n\n Squeegee Rubber Blades\n The squeegee rubber strips (front and rear) are consumable parts.\nHigh-wear environments: Recommended replacement every 1 month.\nMedium-wear environments: Recommended replacement every 2 months.\nLow-wear environments: Recommended replacement every 3 months.\n\n\n Dust Mop Rake Rubber Blades\n The dust mop rake rubber strips (front and rear) are consumable parts.\nHigh-wear environments: Recommended replacement every 1 month.\nMedium-wear environments: Recommended replacement every 2 months.\nLow-wear environments: Recommended replacement every 3 months.\n\n\n Dust Mop Cloth\n The dust mop cloth is a consumable part and requires cleaning during daily use; specific replacement depends on the actual dust conditions of the environment.\n\n\n Dust Box Filter\n The dust box filter is a consumable. If vacuuming performance is affected after long-term use and cannot be restored after cleaning, it must be replaced. The specific replacement timing depends on the actual dust conditions of the environment.\n\n\n\n(The replacement timing for the aforementioned consumables can be determined by referring to the \"Consumables\" status page on the robot's status screen.)\n5.3 Troubleshooting\n\n\n\n Faults\n Troubleshooting Steps\n\n\n\n\n Unable to Power On\n Confirm whether the key switch is in the \"On\" position.\n\n\nCheck if the robot's battery is too low; use the power adapter to charge the robot.\n\n\nIf the power adapter fails to charge, the battery may be completely depleted (if left unused for over 30 days). In this case, remove the battery and use the direct charging cable to charge it.\n\n\n Debris Not Being Swept In\n Check if the trash box is full. If it is, pull out the trash box and empty the debris before continuing operation.\n\n\nCheck the roller brush bristles for wear. If significant wear is confirmed, the roller brush assembly must be replaced.\n\n\n Significant Wastewater Left on the Floor; Unable to Suction into Dirty Water Tank\n Confirm that the dirty water tank lid is correctly installed.\n\n\nRemove the squeegee and check if the suction pipe has suction and whether the wastewater pipe is clogged. If clogged, clear the blockage before use.\n\n\n Unable to Drain Wastewater\n Check if the squeegee rubber blades are worn. If they are, please replace the rubber blades.\n\n\n\nAfter-Sales Policy\nShenzhen Pudu Technology Co., Ltd. promises to provide free product warranty services starting from the date of product activation within the valid warranty period (warranty periods may vary for different components), and customers are not required to pay after-sales service fees. For cases exceeding the warranty period or not falling under the free warranty service, fees will be charged according to standard prices. Customers should contact the official after-sales service hotline to arrange repairs.\nPudu Technology will provide warranty service if the following conditions are met:\uff1a\n1\u3001Within the product warranty period:\n\n\nNon-human quality issues occur under normal use.\n\n\nNo unauthorized disassembly or repair; no water or foreign object ingress; no collision or drop.\n\n\nThe product serial number, factory labels, and other markings show no signs of tearing or tampering.\n\n\nValid proof of purchase, receipts, and order numbers are provided.\n\n\nDamaged spare parts replaced during the warranty period belong to Pudu Technology.\n\n\n2\u3001Pudu Technology will charge for repairs in any of the following situations:\n\n\nThe product exceeds the warranty period.\n\n\nThe product serial number, factory labels, or other markings are torn, tampered with, or unrecognizable.\n\n\nQuality issues caused by collisions or burning not resulting from the product's own quality, or ingress of foreign objects (water, oil, sand, etc.).\n\n\nDamage caused by unauthorized modification, disassembly, opening of the shell, or repairs not guided by official instructions.\n\n\nDamage caused by incorrect installation, use, charging, or storage not in accordance with the product manual and installation guide.\n\n\nDamage caused by using cleaning detergents not specified in official instructions.\n\n\nFailure of accessories or components other than the main warranty parts.\n\n\nFaults or damage caused by force majeure (such as earthquakes, fires, or wars).\u00a0\n\n\nAfter-sales Service Consultation:\nIf you have any questions, please contact Pudu Technology Headquarters:\nOfficial After-sales Email: techservice@pudutech.com\nOfficial After-sales Hotline: 400-0826-660","is_draft":"0","editor_type":"3","file_path":"","add_time":"1773717844","update_time":"1778059256"},"pure_content":"PUDU CC1 Operation Guide V6.0\nPUDU_CC1_Operation_Guide_V6.0.pdf\nDocument Version: V6.0\nModel: CCBC01\/CCBC01N\nShenzhen Pudu Technology Co., Ltd.\nCopyright \u00a9 Shenzhen Pudu Technology Co., Ltd. 2026. A"},{"id":"113759","string_id":"jPixKR","status":"1","parent_id":"783551","slug":"bao-yang-zhi-nan","order":"1","name":"CC1 Maintenance Tips","type":"2","cover":"","cover_alt":"","desc":null,"website":"","contact":"","seo_title":"Maintenance","seo_keyword":"","seo_desc":"","share_switch":"0","share_code":"","author":"\u9093\u4f73\u7389","published_time":"1719381387","add_time":"1718968258","update_time":"1778059256","corp_auth_id":"0","verify_code_auth_id":"0","editor_type":"3","file_type":"","auth_id":"[\"-1\"]","content":{"content_id":"113759","content":"
1. Daily Maintenance<\/h2>\n<\/p>\n
2. Consumable Replacement<\/h2>\n\nSide Brush: The side brush is a consumable part. If you notice that the bristles are worn out and unable to function properly, it should be considered for replacement.<\/li>\n
Dual Brushes: Check the bristles of the brushes. If the remaining height of the bristles reaches a specific indicator height (as shown in the diagram below), they should be replaced.<\/li>\n<\/ul>\n<\/p>\n
\nScrubbing Squeegee Rubber Strips: The rubber strips on the scrubbing squeegee (front and rear) are consumable parts. In high-usage scenarios, it is recommended to replace them every month. In medium-usage scenarios, it is recommended to replace them every two months. In low-usage scenarios, it is recommended to replace them every three months.<\/li>\n
Dust Mopping Rubber Strips: The rubber strips on the dust mopping pad (front and back) are consumable and vulnerable parts. In high-usage scenarios, it is recommended to replace them every month. In medium-usage scenarios, it is recommended to replace them every two months. In low-usage scenarios, it is recommended to replace them every three months.<\/li>\n
Dust Mopping Cloth: The dust mopping cloth is a consumable and vulnerable part. It should be cleaned during daily use, depending on the actual dust conditions of the floor.<\/li>\n
Dust Box : The dust box is a consumable. If you find that the dust box has been used for a long time and it affects the suction effect even after cleaning, it should be replaced. The specific replacement time depends on the actual dust conditions of the floor.<\/li>\n
Water Filter Box: The dust box filter is a consumable. If you find that the dust box has been used for a long time and it affects the suction effect even after cleaning, it should be replaced. The specific replacement time depends on the actual dust conditions of the floor.<\/li>\n<\/ul>\n(The replacement time for the above consumables can be determined by referring to the \"Consumables\" status page on the robot status page.)<\/strong><\/p>\n
3. Troubleshooting<\/strong><\/h2>\n<\/colgroup>\n\n\n\n\n\n\nFaults<\/strong><\/td>\n Solutions<\/strong><\/td>\n<\/tr>\n
Unable to power on<\/td>\n \n\nMake sure the key switch is in the ON position.<\/li>\n
Check if the robot has low battery power. Connect the robot to the power adapter for charging.<\/li>\n
If the power adapter cannot charge the robot, it may be due to the battery being completely drained (left unused for more than 30 days). In this case, remove the battery and use a direct charging cable to charge it.<\/li>\n<\/ol>\n<\/td>\n<\/tr>\n
Unable to sweep up garbage<\/td>\n \n\nCheck if the dust box is full. If it is, remove the dust box, clean it, and then continue with the operation.<\/li>\n
Check if the bristles of the brush are worn out. If they are, replace the brush component.<\/li>\n<\/ol>\n<\/td>\n<\/tr>\n
Unable to suck up a large amount of dirty water from the floor<\/td>\n \n\nConfirm if the dirty water cover is properly installed.<\/li>\n
Remove the mopping pad and check if the suction pipe has suction power and if the dirty water pipe is blocked. If it is blocked, clear the blockage before using.<\/li>\n
Check if the rubber strips on the mopping pad are worn out. If they are, replace the rubber strips.<\/li>\n<\/ol>\n<\/td>\n<\/tr>\n
Unable to drain dirty water<\/td>\n Confirm if the dirty water pipe is blocked. If it is, clear the blockage, clean the dirty water tank, and then proceed with draining.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n <\/p>\n
\n<\/thead>\n\n\n\n\n\n\n\n
Components<\/strong><\/td>\n Robot Status<\/strong><\/td>\n Inspection Interval<\/strong><\/td>\n Maintenance Method<\/strong><\/td>\n<\/tr>\n
driving wheels and auxiliary wheels<\/td>\n Power-off<\/td>\n Weekly<\/td>\n Wipe the surface with a clean cloth.<\/td>\n<\/tr>\n
Vision sensors and Lidar<\/td>\n Power-off<\/td>\n Weekly<\/td>\n Use a clean cloth or lens cleanser for the cleaning.<\/td>\n<\/tr>\n
recovery tank<\/td>\n power off\/on<\/td>\n 2-3 days<\/td>\n Flushing recovery tank with clean water and then drain the dirty water.<\/td>\n<\/tr>\n
Dustbin<\/td>\n power off\/on<\/td>\n 2-3 days<\/td>\n Dump the dirt inside the dustbin, if necessary, wash it with clean water and then dry it.<\/td>\n<\/tr>\n
Water filter chamber<\/td>\n power off\/on<\/td>\n 2-3 days<\/td>\n Rinse the dirt inside the water filter chamber with clean water.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>","pure_content":"1. Daily Maintenance\n\n2. Consumable Replacement\n\nSide Brush: The side brush is a consumable part. If you notice that the bristles are worn out and unable to function properly, it should be considered for replacement.\nDual Brushes: Check the bristles of the brushes. If the remaining height of the bristles reaches a specific indicator height (as shown in the diagram below), they should be replaced.\n\n\n\nScrubbing Squeegee Rubber Strips: The rubber strips on the scrubbing squeegee (front and rear) are consumable parts. In high-usage scenarios, it is recommended to replace them every month. In medium-usage scenarios, it is recommended to replace them every two months. In low-usage scenarios, it is recommended to replace them every three months.\nDust Mopping Rubber Strips: The rubber strips on the dust mopping pad (front and back) are consumable and vulnerable parts. In high-usage scenarios, it is recommended to replace them every month. In medium-usage scenarios, it is recommended to replace them every two months. In low-usage scenarios, it is recommended to replace them every three months.\nDust Mopping Cloth: The dust mopping cloth is a consumable and vulnerable part. It should be cleaned during daily use, depending on the actual dust conditions of the floor.\nDust Box : The dust box is a consumable. If you find that the dust box has been used for a long time and it affects the suction effect even after cleaning, it should be replaced. The specific replacement time depends on the actual dust conditions of the floor.\nWater Filter Box: The dust box filter is a consumable. If you find that the dust box has been used for a long time and it affects the suction effect even after cleaning, it should be replaced. The specific replacement time depends on the actual dust conditions of the floor.\n\n(The replacement time for the above consumables can be determined by referring to the \"Consumables\" status page on the robot status page.)\n3. Troubleshooting\n\n\n\n Faults\n Solutions\n\n\n Unable to power on\n Make sure the key switch is in the ON position.\nCheck if the robot has low battery power. Connect the robot to the power adapter for charging.\nIf the power adapter cannot charge the robot, it may be due to the battery being completely drained (left unused for more than 30 days). In this case, remove the battery and use a direct charging cable to charge it.\n\n\n Unable to sweep up garbage\n Check if the dust box is full. If it is, remove the dust box, clean it, and then continue with the operation.\nCheck if the bristles of the brush are worn out. If they are, replace the brush component.\n\n\n Unable to suck up a large amount of dirty water from the floor\n Confirm if the dirty water cover is properly installed.\nRemove the mopping pad and check if the suction pipe has suction power and if the dirty water pipe is blocked. If it is blocked, clear the blockage before using.\nCheck if the rubber strips on the mopping pad are worn out. If they are, replace the rubber strips.\n\n\n Unable to drain dirty water\n Confirm if the dirty water pipe is blocked. If it is, clear the blockage, clean the dirty water tank, and then proceed with draining.\n\n\n\n\u00a0\n\n\n\n\n Components\n Robot Status\n Inspection Interval\n Maintenance Method\n\n\n driving wheels and auxiliary wheels\n Power-off\n Weekly\n Wipe the surface with a clean cloth.\n\n\n Vision sensors and Lidar\n Power-off\n Weekly\n Use a clean cloth or lens cleanser for the cleaning.\n\n\n recovery tank\n power off\/on\n 2-3 days\n Flushing recovery tank with clean water and then drain the dirty water.\n\n\n Dustbin\n power off\/on\n 2-3 days\n Dump the dirt inside the dustbin, if necessary, wash it with clean water and then dry it.\n\n\n Water filter chamber\n power off\/on\n 2-3 days\n Rinse the dirt inside the water filter chamber with clean water.","is_draft":"0","editor_type":"3","file_path":"","add_time":"1718968258","update_time":"1778059256"},"pure_content":"1. Daily Maintenance\n\n2. Consumable Replacement\n\nSide Brush: The side brush is a consumable part. If you notice that the bristles are worn out and unable to function properly, it should be considered"}],"content":{"icon":"","desc":"","content_id":"783551","add_time":"1778059241","update_time":"1778059241","content":"","is_traffic_less":"0","file_type":""},"hot_list":[],"user_read_num":"0","is_auth":"0"},"msg":"Success","code":200}}

1. Overview<\/h2>\n

1. Instructions for Buttons<\/h2>\n

1.1.1 Powering on<\/h4>\n
After confirming that the key switch is turned on, press and hold the power button for about 3 seconds, and the bottom light strip will appear in blue.<\/p>\n
<\/p>\n

1.1.2 Powering off<\/h4>\n
Press and hold the power button for 6 seconds till the screen goes off, indicating that the robot is successfully powered off.<\/p>\n

<\/h2>\n

<\/h3>\n

2\u3001Safety Instructions<\/h2>\n

3\u3001Product Components<\/h2>\n

3.1 Packing List<\/h3>\n
Main Unit x1, Charger x1, Power Key x2, Side Brush x1, Squeegee x1, Dust Mop Rake x1, Scrubbing Roller Brush x2, Sweeping Roller Brush x2, Water Inlet Hose x1, Cleaning Water Gun x1, \"PUDU CC1 User Manual\" x1, Certificate of Conformity x1, Positioning Code x1<\/p>\n

3.2 Appearance and Parts<\/h3>\n
$\"descript\"$ <\/p>\n
Rear Cleaning Components:<\/strong><\/p>\n
$\"descript\"$ <\/p>\n

4\u3001Product Usage<\/h2>\n

4.1 Basic Usage<\/h3>\n

4.1.2 Start Cleaning Task<\/h4>\n
On the robot's home screen, click \"Auto Cleaning\" or \"Manual Cleaning\" to select a cleaning task or mode and start the cleaning process.<\/p>\n
$\"descript\"$ <\/p>\n

4.1.3 Pause Cleaning Task<\/h4>\n
During automatic cleaning operation, tap the wake-up screen and press the Pause button to temporarily suspend robot work.<\/p>\n
$\"descript\"$ <\/p>\n

4.1.4 Resume Cleaning Task<\/h4>\n
To resume operation, tap the Start button on the screen. The robot will continue its pending task<\/p>\n
$\"descript\"$ <\/p>\n

4.3 Work Modes<\/h3>\n

<\/h4>\n

4.4 Cleaning Modes<\/h3>\n

<\/h4>\n

4.5 Robot Renew Water<\/h3>\n

<\/h3>\n

4.9 Common Functions<\/h3>\n

<\/h4>\n

5\u3001Product Maintenance & Troubleshooting<\/h2>\n

5.1 Daily Cleaning<\/h3>\n

1. Daily Maintenance<\/h2>\n
<\/p>\n

1. Overview<\/h2>\n

1. Instructions for Buttons<\/h2>\n

1.1.1 Powering on<\/h4>\nAfter confirming that the key switch is turned on, press and hold the power button for about 3 seconds, and the bottom light strip will appear in blue.<\/p>\n<\/p>\n

1.1.2 Powering off<\/h4>\nPress and hold the power button for 6 seconds till the screen goes off, indicating that the robot is successfully powered off.<\/p>\n

<\/h2>\n

<\/h3>\n

2\u3001Safety Instructions<\/h2>\n

3\u3001Product Components<\/h2>\n

3.1 Packing List<\/h3>\nMain Unit x1, Charger x1, Power Key x2, Side Brush x1, Squeegee x1, Dust Mop Rake x1, Scrubbing Roller Brush x2, Sweeping Roller Brush x2, Water Inlet Hose x1, Cleaning Water Gun x1, \"PUDU CC1 User Manual\" x1, Certificate of Conformity x1, Positioning Code x1<\/p>\n

3.2 Appearance and Parts<\/h3>\n<\/p>\nRear Cleaning Components:<\/strong><\/p>\n<\/p>\n

4\u3001Product Usage<\/h2>\n

4.1 Basic Usage<\/h3>\n

4.1.2 Start Cleaning Task<\/h4>\nOn the robot's home screen, click \"Auto Cleaning\" or \"Manual Cleaning\" to select a cleaning task or mode and start the cleaning process.<\/p>\n<\/p>\n

4.1.3 Pause Cleaning Task<\/h4>\nDuring automatic cleaning operation, tap the wake-up screen and press the Pause button to temporarily suspend robot work.<\/p>\n<\/p>\n

4.1.4 Resume Cleaning Task<\/h4>\nTo resume operation, tap the Start button on the screen. The robot will continue its pending task<\/p>\n<\/p>\n

4.3 Work Modes<\/h3>\n

<\/h4>\n

4.4 Cleaning Modes<\/h3>\n

<\/h4>\n

4.5 Robot Renew Water<\/h3>\n

<\/h3>\n

4.9 Common Functions<\/h3>\n

<\/h4>\n

5\u3001Product Maintenance & Troubleshooting<\/h2>\n

5.1 Daily Cleaning<\/h3>\n

1. Daily Maintenance<\/h2>\n<\/p>\n

1.1.1 Powering on<\/h4>\n
After confirming that the key switch is turned on, press and hold the power button for about 3 seconds, and the bottom light strip will appear in blue.<\/p>\n
<\/p>\n

1.1.2 Powering off<\/h4>\n
Press and hold the power button for 6 seconds till the screen goes off, indicating that the robot is successfully powered off.<\/p>\n

3.1 Packing List<\/h3>\n
Main Unit x1, Charger x1, Power Key x2, Side Brush x1, Squeegee x1, Dust Mop Rake x1, Scrubbing Roller Brush x2, Sweeping Roller Brush x2, Water Inlet Hose x1, Cleaning Water Gun x1, \"PUDU CC1 User Manual\" x1, Certificate of Conformity x1, Positioning Code x1<\/p>\n

3.2 Appearance and Parts<\/h3>\n
$\"descript\"$ <\/p>\n
Rear Cleaning Components:<\/strong><\/p>\n
$\"descript\"$ <\/p>\n

4.1.2 Start Cleaning Task<\/h4>\n
On the robot's home screen, click \"Auto Cleaning\" or \"Manual Cleaning\" to select a cleaning task or mode and start the cleaning process.<\/p>\n
$\"descript\"$ <\/p>\n

4.1.3 Pause Cleaning Task<\/h4>\n
During automatic cleaning operation, tap the wake-up screen and press the Pause button to temporarily suspend robot work.<\/p>\n
$\"descript\"$ <\/p>\n

4.1.4 Resume Cleaning Task<\/h4>\n
To resume operation, tap the Start button on the screen. The robot will continue its pending task<\/p>\n
$\"descript\"$ <\/p>\n

1. Daily Maintenance<\/h2>\n
<\/p>\n